From owner-freebsd-scsi Fri Jul 2 18:39:58 1999 Delivered-To: freebsd-scsi@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 0C2BB15185 for ; Fri, 2 Jul 1999 18:39:48 -0700 (PDT) (envelope-from mjacob@feral.com) Received: from semuta.feral.com (semuta [192.67.166.70]) by feral.com (8.8.7/8.8.7) with ESMTP id SAA01431; Fri, 2 Jul 1999 18:39:44 -0700 Date: Fri, 2 Jul 1999 18:39:18 -0700 (PDT) From: Matthew Jacob Reply-To: mjacob@feral.com To: "Justin T. Gibbs" , "Kenneth D. Merry" Cc: scsi@freebsd.org Subject: just so you all know how really whacky it can get... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I've added Fabric support and also added/tested for SCCLUN.... While doing a rescan on a SCCLUN enabled (16 bit luns) through a switch... this sort of leads me to believe that we need some more flags so that an HBA can inform CAM that an exhaustive search isn't needed- or at least I need to try and implement the REPORT LUNS command... at some point it rebooted (I didn't yet catch why).... really pretty amusing: isp1: Loop DOWN- freezing SIMQ until Loop comes up isp1: LIP occurred isp1: Loop UP-releasing frozen SIMQ isp1: Firmware State Config Wait -> Ready isp1: Loop ID 89, AL_PA 0x4a, Port ID 0x814b4a isp1: type 0x2@portid 0x814dcb 0x210000203704fe7d isp1: type 0x2@portid 0x814db5 0x5080020000029502 isp1: type 0x2@portid 0x814dcc 0x2100002037078f93 isp1: type 0x2@portid 0x814dcb 0x210000203704fe7d isp1: type 0x2@portid 0x814dcd 0x2100002037049eab isp1: type 0x2@portid 0x814dcc 0x2100002037078f93 isp1: type 0x2@portid 0x814dd2 0x5080020000029501 isp1: type 0x2@portid 0x814dcd 0x2100002037049eab isp1: type 0x2@portid 0x814ddc 0x2100002037074a00 isp1: type 0x2@portid 0x814dd2 0x5080020000029501 isp1: type 0x2@portid 0x814de0 0x2100002037003259 isp1: type 0x2@portid 0x814ddc 0x2100002037074a00 isp1: type 0x2@portid 0x814de1 0x2100002037049a8f isp1: type 0x2@portid 0x814de0 0x2100002037003259 isp1: type 0x2@portid 0x814de2 0x2100002037049f06 isp1: type 0x2@portid 0x814de1 0x2100002037049a8f isp1: type 0x2@portid 0x814de4 0x21000020370022e4 isp1: type 0x2@portid 0x814de2 0x2100002037049f06 isp1: type 0x2@portid 0x814e75 0x000000c08c000176 isp1: type 0x2@portid 0x814de4 0x21000020370022e4 isp1: type 0x2@portid 0x814fef 0x2200080020a020e8 isp1: type 0x2@portid 0x814e75 0x000000c08c000176 isp1: type 0x2@portid 0x814b4a 0x210000e08b0012c5 da2 at isp1 bus 0 target 131 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 100.000MB/s transfers, Tagged Queueing Enabled da2: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da3 at isp1 bus 0 target 132 lun 0 da3: Fixed Direct Access SCSI-2 device da3: 100.000MB/s transfers, Tagged Queueing Enabled da3: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da4 at isp1 bus 0 target 133 lun 0 da4: Fixed Direct Access SCSI-2 device da4: 100.000MB/s transfers, Tagged Queueing Enabled da4: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da5 at isp1 bus 0 target 135 lun 0 da5: Fixed Direct Access SCSI-2 device da5: 100.000MB/s transfers, Tagged Queueing Enabled da5: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da6 at isp1 bus 0 target 136 lun 0 da6: Fixed Direct Access SCSI-2 device da6: 100.000MB/s transfers, Tagged Queueing Enabled da6: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da7 at isp1 bus 0 target 137 lun 0 da7: Fixed Direct Access SCSI-2 device da7: 100.000MB/s transfers, Tagged Queueing Enabled da7: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da8 at isp1 bus 0 target 138 lun 0 da8: Fixed Direct Access SCSI-2 device da8: 100.000MB/s transfers, Tagged Queueing Enabled da8: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da9 at isp1 bus 0 target 139 lun 0 da9: Fixed Direct Access SCSI-2 device da9: 100.000MB/s transfers, Tagged Queueing Enabled da9: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) (da10:isp1:0:139:671): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da10:isp1:0:139:671): ILLEGAL REQUEST asc:25,0 (da10:isp1:0:139:671): Logical unit not supported field replaceable unit: 1 (da10:isp1:0:139:671): fatal error, failed to attach to device (da10:isp1:0:139:671): lost device (da10:isp1:0:139:671): removing device entry (da11:isp1:0:136:672): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da11:isp1:0:136:672): ILLEGAL REQUEST asc:25,0 (da11:isp1:0:136:672): Logical unit not supported field replaceable unit: 1 (da11:isp1:0:136:672): fatal error, failed to attach to device (da11:isp1:0:136:672): lost device (da11:isp1:0:136:672): removing device entry (da10:isp1:0:132:22981): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da10:isp1:0:132:22981): ILLEGAL REQUEST asc:25,0 (da10:isp1:0:132:22981): Logical unit not supported field replaceable unit: 1 (da10:isp1:0:132:22981): fatal error, failed to attach to device (da10:isp1:0:132:22981): lost device (da10:isp1:0:132:22981): removing device entry (da11:isp1:0:136:22980): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da11:isp1:0:136:22980): ILLEGAL REQUEST asc:25,0 (da11:isp1:0:136:22980): Logical unit not supported field replaceable unit: 1 (da11:isp1:0:136:22980): fatal error, failed to attach to device (da11:isp1:0:136:22980): lost device (da11:isp1:0:136:22980): removing device entry isp1: command timed out for target 137 lun 671 isp1: command timed out for target 138 lun 671 (da10:isp1:0:133:28905): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da10:isp1:0:133:28905): ILLEGAL REQUEST asc:25,0 (da10:isp1:0:133:28905): Logical unit not supported field replaceable unit: 1 (da10:isp1:0:133:28905): fatal error, failed to attach to device (da10:isp1:0:133:28905): lost device (da10:isp1:0:133:28905): removing device entry (da11:isp1:0:138:1241): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da11:isp1:0:138:1241): ILLEGAL REQUEST asc:25,0 (da11:isp1:0:138:1241): Logical unit not supported field replaceable unit: 1 (da11:isp1:0:138:1241): fatal error, failed to attach to device (da11:isp1:0:138:1241): lost device (da11:isp1:0:138:1241): removing device entry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message