Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 Jul 1997 22:00:03 -0700
From:      Amancio Hasty <hasty@rah.star-gate.com>
To:        "Louis A. Mamakos" <louie@TransSys.COM>
Cc:        multimedia@FreeBSD.ORG
Subject:   Re: ftp://rah.star-gate.com/pub/guspnp12.tar.gz 
Message-ID:  <199707240500.WAA09277@rah.star-gate.com>
In-Reply-To: Your message of "Thu, 24 Jul 1997 00:21:18 EDT." <199707240421.AAA07516@whizzo.TransSys.COM> 

next in thread | previous in thread | raw e-mail | index | archive | help
Okay, I will fix the driver over here. Just a little confused at the 
moment with the SB16 thingies.

	Regards,
	Amancio

>From The Desk Of "Louis A. Mamakos" :
> Well, that's weird that your mixer works.  I'm going to look inside of
> mixer, and see what it's getting back from the kernel.
> 
> Does this /dev/sndstat look OK? :
> 
> bash-2.00$ cat /dev/sndstat
> VoxWare Sound Driver:3.5-alpha11-9707223 (Wed Jul 23 3:00:00 PDT 1997 Amancio
 
> Hasty@rah.star-gate.com)
> Config options:
> 
> Installed drivers:
> Type 1: OPL-2/OPL-3 FM
> Type 2: SoundBlaster
> Type 6: SoundBlaster16
> Type 7: SB16 MIDI
> 
> 
> Card config:
> SoundBlaster at 0x280 irq 10 drq 1
> SoundBlaster16 at 0x280 irq 10 drq 5
> OPL-2/OPL-3 FM at 0x388 irq 1
> SB16 MIDI at 0x330 irq 10
> 
> Audio devices:
> 0: SoundBlaster 16 4.13
> 
> Synth devices:
> 0: Yamaha OPL-3
> 
> Midi devices:
> 0: SoundBlaster 16 Midi
> 
> Timers:
> 0: System clock
> 
> Mixers:
> 0: SoundBlaster
> bash-2.00$ 
> 
> I'm now getting these messages at boot time:
> 
> sb0 at 0x280 irq 10 drq 1 on isa
> <SoundBlaster 16 4.13> at 0x280 irq 10 dma 1
> sbxvi0 at 0x280 irq 10 drq 5 on isa
> <SoundBlaster 16 4.13> at 0x280 irq 10 dma 5
>         device combination doesn't support shared irq10
>         intr_connect(irq10) failed, result=-1
> opl0 at 0x388 irq 31 on isa
> <Yamaha OPL3 FM> at 0x388
> create_intr: requested irq31 too high, limit is 15
> sbmidi0 at 0x330 irq 10 on isa
> <SoundBlaster MPU-401> at 0x330 irq 10
>         device combination doesn't support shared irq10
>         intr_connect(irq10) failed, result=-1
> 
> 





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199707240500.WAA09277>