From owner-freebsd-hardware@FreeBSD.ORG Thu Mar 20 11:28:08 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1F1541065672 for ; Thu, 20 Mar 2008 11:28:08 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from minas.ics.muni.cz (minas.ics.muni.cz [147.251.4.40]) by mx1.freebsd.org (Postfix) with ESMTP id 10DF98FC12 for ; Thu, 20 Mar 2008 11:28:05 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from KLOBOUCEK (dhcp3-82.ics.muni.cz [147.251.3.82]) (authenticated user=hopet@ICS.MUNI.CZ bits=0) by minas.ics.muni.cz (8.13.8/8.13.8/SuSE Linux 0.8) with ESMTP id m2KBQbnQ021098 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO); Thu, 20 Mar 2008 12:26:38 +0100 From: "Petr Holub" To: "'Sam Leffler'" References: <003201c87aba$1ecdd210$5c697630$@muni.cz> <47C86BF5.8010306@errno.com> <018401c8899e$206076d0$61216470$@muni.cz> <47E15497.7060900@errno.com> In-Reply-To: <47E15497.7060900@errno.com> Date: Thu, 20 Mar 2008 12:26:28 +0100 Message-ID: <001c01c88a7d$429e6100$c7db2300$@muni.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 12.0 thread-index: AciJ8EAPbAadUUEkQKOzWBrx3jSIMgAjG+0Q Content-Language: cs x-cr-hashedpuzzle: LBo= ADIh ECOe Epem Fb4w G+md HO4t Hmz6 IPs8 Kt6q NbGQ PY14 QhDT SkJK UApt UKMK; 2; ZgByAGUAZQBiAHMAZAAtAGgAYQByAGQAdwBhAHIAZQBAAGYAcgBlAGUAYgBzAGQALgBvAHIAZwA7AHMAYQBtAEAAZQByAHIAbgBvAC4AYwBvAG0A; Sosha1_v1; 7; {52F19CCD-C503-4896-8C06-13BABEA80CE1}; aABvAHAAZQB0AEAAaQBjAHMALgBtAHUAbgBpAC4AYwB6AA==; Thu, 20 Mar 2008 11:26:12 GMT; UgBFADoAIABzAHUAcABwAG8AcgB0ACAAZgBvAHIAIABQAHIAbwB4AGkAbQAgAFMAaQBsAHYAZQByACAAdwBpAGYAaQAgAGMAYQByAGQA x-cr-puzzleid: {52F19CCD-C503-4896-8C06-13BABEA80CE1} X-Muni-Spam-TestIP: 147.251.3.82 X-Muni-Envelope-From: hopet@ics.muni.cz X-Muni-Virus-Test: Clean X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-3.0 (minas.ics.muni.cz [147.251.4.35]); Thu, 20 Mar 2008 12:26:38 +0100 (CET) Cc: freebsd-hardware@freebsd.org Subject: RE: support for Proxim Silver wifi card X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 20 Mar 2008 11:28:08 -0000 Sam, > laptop. I happen to have a t61p and just tried a bunch of different > cards (including one w/ this device id) and all the cards I expected to > work so the best I can suggest is you try the card in another laptop. it really looks like there's something weird about the PCCARD slot in (my) T61p. I tried with an older T41p running 6.2-RELEASE-p4 and the card successfully works, see the verbose dmesg excerpt (complete one is below my signature): pcib2: cardbus0 requested memory range 0xc0200000-0xcfffffff: good pcib2: cardbus0 requested memory range 0xc0200000-0xcfffffff: good pcib2: cardbus0 requested memory range 0xc0240000-0xc024ffff: good found-> vendor=0x168c, dev=0x0013, revid=0x01 bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 ath0: mem 0xc0240000-0xc024ffff irq 11 at device 0.0 on cardbus0 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc0240000 ath0: Reserved 0x1 bytes for rid 0 type 1 at 0xb ath0: [MPSAFE] ath0: bpf attached ath0: Ethernet address: 00:20:a6:4c:71:3a ath0: bpf attached ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons So I assume it should work on 7.0 and the problem is elsewhere... any ideas on further debugging? Maybe if imp@ could help with this? Thanks a lot, Petr ================================================================ Petr Holub CESNET z.s.p.o. Supercomputing Center Brno Zikova 4 Institute of Compt. Science 162 00 Praha 6, CZ Masaryk University Czech Republic Botanicka 68a, 60200 Brno, CZ e-mail: Petr.Holub@cesnet.cz phone: +420-549493944 fax: +420-541212747 e-mail: hopet@ics.muni.cz Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p4 #0: Thu Apr 26 17:55:55 UTC 2007 root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/SMP Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bab000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0bab19c. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0bab248. Preloaded elf module "/boot/kernel/acpi_ibm.ko" at 0xc0bab2f4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bab3a4. Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc0bab450. Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc0bab4fc. Preloaded elf module "/boot/kernel/atapicam.ko" at 0xc0bab5ac. Calibrating clock(s) ... i8254 clock: 1193148 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1694510444 Hz CPU: Intel(R) Pentium(R) M processor 1700MHz (1694.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf Features2=0x180 real memory = 1609957376 (1535 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000005e416fff, 1568600064 bytes (382959 pages) avail memory = 1568276480 (1495 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6d20 bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6e0+0x1f6 pnpbios: Found PnP BIOS data at 0xc00f6da0 pnpbios: Entry = f0000:b614 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> ath_rate: version 1.2 random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Apr 26 2007 17:55:39) npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] acpi_ec0: port 0x62,0x66 on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086) pcibios: BIOS version 2.10 Found $PIR table, 15 entries at 0xc00fdea0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 1 AcpiOsDerivePciId: bus 0 dev 29 func 7 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd970d000 pa 0x90000 atpic: Programming IRQ9 as level/low ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 cpu0: on acpi0 acpi_perf0: on cpu0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x1010 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 ACPI: Found matching pin for 0.29.INTD at func 7: 11 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 3: 11 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x3340, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=0x8086, dev=0x3341, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x24c7, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x24cd, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c0000000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.LNKH found-> vendor=0x8086, dev=0x2448, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24ca, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001860, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=0x8086, dev=0x24c3, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c5, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base c0000c00, size 9, enabled map[1c]: type 1, range 32, base c0000800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c6, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB agp0: mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4e54, revid=0x80 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0307, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: (null) requested memory range 0xe0000000-0xe7ffffff: good map[14]: type 4, range 32, base 00003000, size 8, enabled pcib1: (null) requested I/O range 0x3000-0x30ff: in range map[18]: type 1, range 32, base c0100000, size 16, enabled pcib1: (null) requested memory range 0xc0100000-0xc010ffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.LNKA pci1: at device 0.0 (no driver attached) uhci0: port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc0000000 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 8 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xc0200000-0xcfffffff pcib2: prefetched decode 0xe8000000-0xefffffff pcib2: Subtractively decoded bridge. ACPI: Found matching pin for 2.0.INTA at func 0: 11 ACPI: Found matching pin for 2.0.INTB at func 1: 11 ACPI: Found matching pin for 2.1.INTA at func 0: 11 ACPI: Found matching pin for 2.2.INTA at func 0: 11 pci2: on pcib2 pci2: physical bus=2 found-> vendor=0x104c, dev=0xac46, revid=0x01 bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0000000, size 12, enabled pcib2: (null) requested memory range 0xb0000000-0xb0000fff: good pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKA:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x104c, dev=0xac46, revid=0x01 bus=2, slot=0, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b1000000, size 12, enabled pcib2: (null) requested memory range 0xb1000000-0xb1000fff: good pcib2: matched entry for 2.0.INTB (src \\_SB_.LNKB:0) pcib2: slot 0 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x101e, revid=0x03 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base c0220000, size 17, enabled pcib2: (null) requested memory range 0xc0220000-0xc023ffff: good map[14]: type 1, range 32, base c0200000, size 16, enabled pcib2: (null) requested memory range 0xc0200000-0xc020ffff: good map[18]: type 4, range 32, base 00008000, size 6, enabled pcib2: (null) requested I/O range 0x8000-0x803f: in range pcib2: matched entry for 2.1.INTA (src \\_SB_.LNKA:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x1043, revid=0x04 bus=2, slot=2, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c0214000, size 12, enabled pcib2: (null) requested memory range 0xc0214000-0xc0214fff: good pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC:0) pcib2: slot 2 INTA routed to irq 11 via \\_SB_.LNKC cbb0: mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac46104c 0x02100107 0x06070001 0x00824008 0x10: 0xb0000000 0x220000a0 0xb0050302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x05521014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0840f071 0x040a0000 0x000f0000 0x01d21b22 0x90: 0x416422c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb1000000 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac46104c 0x02100107 0x06070001 0x00824008 0x10: 0xb1000000 0x020000a0 0xb0080602 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b 0x40: 0x05521014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0840d071 0x040a0000 0x000f0000 0x01d21b22 0x90: 0x416422c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 em0: port 0x8000-0x803f mem 0xc0220000-0xc023ffff,0xc0200000-0xc020ffff irq 11 at device 1.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xc0220000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x8000 em0: bpf attached em0: Ethernet address: 00:0d:60:d0:e5:27 em0: [MPSAFE] pci2: at device 2.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=51 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) pcm0: port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xc0000c00-0xc0000dff,0xc0000800-0xc00008ff irq 11 at device 31.5 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xc0000c00 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xc0000800 pcm0: [MPSAFE] pcm0: pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: sndbuf_setmap 5e057000, 4000; 0xf5e26000 -> 5e057000 pcm0: sndbuf_setmap 5e053000, 4000; 0xf5e2a000 -> 5e053000 pci0: at device 31.6 (no driver attached) acpi_tz0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: flags 0x2000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00002000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x201 0x201 0x201 0x201 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 8250 or not responding ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x3bc-0x3be irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 battery0: on acpi0 acpi_acad0: on acpi0 acpi_ibm0: on acpi0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ahc_isa_probe 1: ioport 0x1c00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xef fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 102135 -> 100000 procfs registered Timecounter "TSC" frequency 1694510444 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout battery0: battery initialization start acpi_acad0: acline initialization start battery0: battery initialization done, tried 1 times acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH4 chip ad0: setting UDMA100 on ICH4 chip ad0: 53959MB at ata0-master UDMA100 ad0: 110509426 sectors [109632C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire acd0: setting PIO4 on ICH4 chip acd0: setting UDMA33 on ICH4 chip acd0: CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 47999 Hz, will use 48000 Hz fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 ATA PseudoRAID loaded (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init Linux ELF exec handler installed pcib2: cardbus0 requested memory range 0xc0200000-0xcfffffff: good pcib2: cardbus0 requested memory range 0xc0200000-0xcfffffff: good pcib2: cardbus0 requested memory range 0xc0240000-0xc024ffff: good found-> vendor=0x168c, dev=0x0013, revid=0x01 bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 ath0: mem 0xc0240000-0xc024ffff irq 11 at device 0.0 on cardbus0 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc0240000 ath0: Reserved 0x1 bytes for rid 0 type 1 at 0xb ath0: [MPSAFE] ath0: bpf attached ath0: Ethernet address: 00:20:a6:4c:71:3a ath0: bpf attached ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons