Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 1 Mar 2006 09:57:34 -0600
From:      Timothy <timothy@jupiter.stcl.edu>
To:        freebsd-questions@freebsd.org
Subject:   Re: Via Velocity Gig Ethernet will not initialize on FreeBSD 6 Release
Message-ID:  <200603010957.34958.timothy@jupiter.stcl.edu>
In-Reply-To: <4405C0E9.1070005@viviotech.net>
References:  <200603010929.23588.timothy@jupiter.stcl.edu> <4405C0E9.1070005@viviotech.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 01 March 2006 09:42 am, Jordan Michaels wrote:
> We just had a similar situation with an NForce4 onboard GigE NIC. We
> were using a linux OS, but it turns out it was the 100mb switch we had
> it plugged into. Near as I can tell, the switch and the NIC had trouble
> auto-negotiating the connection rate. Once we connected the GigE NIC to
> a GigE switch, the NIC worked beautifully.
>
> I'm not sure what "MII read timed out" means, but the OS does see the
> NIC and appears to be attempting to use it. You may want to check to see
> if it's the switch you're connecting to rather then the OS you're running.
>
> HTH!
I have the same error when plugging into a D-Link DGS-108 gigabit switch or a 
Linksys Gigabit Workgroup switch.  Both work with the same computer running 
Linux, but I want to run FreeBSD on this box.

Thanks for the info though.

Timothy



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200603010957.34958.timothy>