Date: Thu, 25 Feb 1999 10:23:27 +0800 (HKT) From: Chan Yiu Wah <c5666305@hkstar.com> To: freebsd-multimedia@freebsd.org Subject: please help to setup fxtv Message-ID: <199902250223.KAA09548@b1.hkstar.com>
next in thread | raw e-mail | index | archive | help
Hello,
I am newbie to multmedia and all the applications like fxtv. I recently got
a LeadTek WinView 601 tv/fm tuner card and tried to setup it. I had no problem
to make the system to recognized the card. It seemed ok. However, I got no
image when I start the fxtv (version 0.48). Here are the fxtv -debug startup
and the dmesg of my system. Can anyone help ? Thanks.
Clarence
======= fxtv -debug startup =======
ioctl(BT848_REEPROM) failed: Input/output error
open("/dev/mixer") failed
Direct Video not supported by visual...using XImages
Fxtv v0.48
DETECTED CAPTURE CARD(S) [DRIVER PROBES]:
bktr0: <BrookTree 848a> rev 0x12 int a irq 9 on pci0.9.0
bti2c0: <bt848 Hard/Soft I2C controller>
SYSCTL MIB VALUES:
kern.version: FreeBSD 4.0-CURRENT #0: Thu Feb 25 09:40:16 GMT 1999
root@fbsd-elf.comp.polyu.edu.hk:/usr/src/sys/compile/MY-GENERIC
hw.bt848.card: -1
hw.bt848.tuner: -1
hw.bt848.reverse_mute: -1
hw.bt848.format: -1
TUNER SIGNATURE (0x01 - 0xff):
00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00
01 a6 07 28 d4 d6 bf ef 26 9a 07 28 ea 00 00 00
00 00 00 00 00 a4 08 28 01 00 00 00 68 69 08 28
98 d7 bf 30 2b 33 07 08 0a 00 00 00 af d6 bf ef
01 00 00 00 5c 18 11 28 00 00 00 00 00 a4 08 28
81 a6 07 28 4f 97 04 08 b8 84 07 28 68 69 08 28
00 00 00 00 4c da 22 28 01 ed 11 28 2c d7 bf ef
e1 9c 07 28 68 69 08 28 2c d7 bf ef 7d 9a 07 28
TUNER I2C DEVICES FOUND AT:
0xc2
CAPTURE CARD EEPROM CONTENTS:
Read 0 EEPROM bytes
Supported RGB Capture Pixel Formats:
bpp Bpp RGB Masks Swap
--- --- ---------------------------- ----
15 2 00007c00, 000003e0, 0000001f NB
16 2 0000f800, 000007e0, 0000001f NB
24 3 00ff0000, 0000ff00, 000000ff B
24 4 00ff0000, 0000ff00, 000000ff NBWb
Supported YUV Capture Pixel Formats:
YUVSize HSamp VSamp Pack CompOrder T->B L->R YTrans
------- ----- ----- ------ --------- ---- ---- ------
8,8,8 1,2,2 1,1,1 PLANAR YUV Y Y N
8,8,8 1,2,2 1,1,1 PACKED YUYV Y Y N
8,8,8 1,2,2 1,2,2 PLANAR YUV Y Y N
XSERVER: 'The XFree86 Project, Inc' v3330, Protocol Verson 11.0
Screen Res = 1024x768, DefDepth = 24; NumScreens = 1
Bitmap Unit/BitOrder/Pad = 32/LSBFirst/32, Image ByteOrder = LSBFirst
XF86DGAQueryVersion() succeeded - vers = 1.00
BaseAddr = 0xe0000000, Pitch = 1024, BankSize/RamSize = 4194304/4194304
Rating Available Visuals:
Rating Class bpp Bpp R,G,B Masks Swap DirectVid
------ ----------- --- --- ---------------------------- ---- ---------
4 TrueColor 24 3,3 00ff0000, 0000ff00, 000000ff -- No
Default Visual is 24-bpp TrueColor
XF86VidModeQueryVersion() succeeded - version = 0.08
======= fxtv -debug startup =======
======= dmesg =======
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Thu Feb 25 09:40:16 GMT 1999
root@fbsd-elf.comp.polyu.edu.hk:/usr/src/sys/compile/MY-GENERIC
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 233864680 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 134217728 (131072K bytes)
avail memory = 126844928 (123872K bytes)
Preloaded elf kernel "kernel" at 0xf03af000.
vinum: loaded
ccd0-3: Concatenated disk drivers
Probing for devices on PCI bus 0:
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
uhci0: <Intel 82371AB/EB (PIIX4) USB Host Controller> rev 0x01 int d irq 11 on pci0.7.2
usb0: USB version 1.0, interrupting at 11
intpm0: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
intpm0: I/O mapped 5000 ALLOCED IRQ 0 intr IRQ 9 enabled revision 0
intsmb0: <Intel PIIX4 SMBUS Interface>
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 10 on pci0.8.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
bktr0: <BrookTree 848a> rev 0x12 int a irq 9 on pci0.9.0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus1: <System Management Bus> on bti2c0
smb1: <SMBus general purpose I/O> on smbus1
IMS TV Turbo, Philips FR1236 NTSC FM tuner.
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 11 on pci0.11.0
ed2: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 10 on pci0.12.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed1 not found at 0x280
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
ppi0: <generic parallel i/o> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
usbd_match
usb0: <Intel 82371AB/EB (PIIX4) USB Host Controller>
usbd_attach
usbd_new_device bus=0xf09bc000 depth=0 lowspeed=0
usbd_new_device: adding unit addr=1, rev=100, class=9, subclass=0, protocol=0, maxpacket=64, ls=0
usbd_new_device: new dev (addr 1), dev=0xf09cdf80, parent=0xf09c4d40
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
usbd_set_config_index: (addr 1) attr=0x40, selfpowered=1, power=0, powerquirk=0
usbd_set_config_index: set config 1
usbd_set_config_index: setting new config 1
uhub0: 2 ports with 2 removable, self powered
usbd_init_port: adding hub port=1 status=0x0100 change=0x0000
usbd_init_port: adding hub port=2 status=0x0100 change=0x0000
Intel Pentium detected, installing workaround for F00F bug
Waiting 15 seconds for SCSI devices to settle
changing root device to da0s1a
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [80798 x 2048 byte records]
da1 at ahc0 bus 0 target 2 lun 0
da1: <FUJITSU M2513A 1500> Removable Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 10)
da1: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
======= dmesg =======
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199902250223.KAA09548>