Date: Sat, 26 Sep 1998 11:04:43 -0700 (PDT) From: Howard Lew <digital@www2.shoppersnet.com> To: Dan Busarow <dan@dpcsys.com> Cc: freebsd-questions@FreeBSD.ORG, freebsd-scsi@FreeBSD.ORG Subject: Re: NCR 53c875 SCSI Problems Message-ID: <Pine.BSF.3.96.980926105149.2633A-100000@www2.shoppersnet.com> In-Reply-To: <Pine.BSF.3.96.980926101709.16885C-100000@java.dpcsys.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 26 Sep 1998, Dan Busarow wrote: > On Fri, 25 Sep 1998, Howard Lew wrote: > > on FreeBSD 2.2.6... > > > > ncr0 <ncr 53c875j fast 20 wide scsi> rev 4 int a irq 12 on pci0:11 > > sd0(ncr0:2:0):COMMAND FAILED (9 ff) @ f0692c00 > > ncr0: aborting job... > > ncr0:0: ERROR (90:0) (8-a6-0) (0/5) @ (script a0:43000060). > > ncr0: script cmd=878b0000 > > ncr0: regdump:da 00 00 05 47 00 02 0f 71 08 00 a6 80 00 00 02. > > ncr0: restart (fatal error). > > > > <this keeps repeating...> > > I'd check cables and termination. Might be a DOA adapter as well. > This is from 2.2.5 but I have also used the FP40 on 2.2.6. > > ncr0 <ncr 53c875j fast20 wide scsi> rev 4 int a irq 9 on pci0:8 > ncr0 waiting for scsi devices to settle > (ncr0:0:0): "QUANTUM FIREBALL SE2.1S PJ09" type 0 fixed SCSI 2 > sd0(ncr0:0:0): Direct-Access > sd0(ncr0:0:0): 20.0 MB/s (50 ns, offset 15) > 2051MB (4201304 512 byte sectors) > (ncr0:1:0): "QUANTUM FIREBALL ST4.3S 0F0C" type 0 fixed SCSI 2 > sd1(ncr0:1:0): Direct-Access > sd1(ncr0:1:0): 20.0 MB/s (50 ns, offset 15) > 4136MB (8471232 512 byte sectors) > (ncr0:3:0): "NEC CD-ROM DRIVE:222 3.0i" type 5 removable SCSI 2 > cd0(ncr0:3:0): CD-ROM > cd0(ncr0:3:0): asynchronous. > can't get the size > (ncr0:4:0): "CONNER CTT8000-S 1.17" type 1 removable SCSI 2 > st0(ncr0:4:0): Sequential-Access > st0(ncr0:4:0): 5.0 MB/s (200 ns, offset 15) > density code 0x45, drive empty > Yes it is terminated correctly. This is the same exact setup I had with the 810 card. I also checked out the card by loading win95 and it works okay, so it must be a software issue. However, if I pull the Seagate hard disk off the scsi bus, the bootup works fine. Of course, then I could not use the drive for FreeBSD. Somehow, the Seagate Hawk drive is having or causing the command failure problem -- something that never occurred with the 810 when using freebsd. Does anyone know what kind of command it is failing on? Is it trying to query the drive speed or something? Any ideas guys? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980926105149.2633A-100000>