Date: Wed, 10 Jul 2002 14:32:09 +0200 From: deep <deep@wiresec.com> To: questions@freebsd.org Subject: Dell Inspiron 2600 the default CD/floppy for 4.6-RELEASE freezes Message-ID: <5.1.0.14.2.20020710142604.00bd9068@mail.websenter.com>
next in thread | raw e-mail | index | archive | help
on Dell Inspiron 2600 (1000MHz/256RAM/20g HD/3c905C-TX)
the default CD/floppy for 4.6-RELEASE freezes.
i tryed disabling everything from bios and kernel config at boot but still
the same.
the booting process said:
pccard0: <PC Card bus (clasic)> on pcic0
...
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f.....
....
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=08086, dev=0x2483) at 31,3 irq 10
pci0: <unknown card> (vendor=08086, dev=0x2485) at 31,5 irq 10
pci0: <unknown card> (vendor=08086, dev=0x2486) at 31,6 irq 10
<*** this is where it freezes: ****>
i couldn't boot any freebsd but i could boot OpenBSD 3.1 floppy. here's the
dmesg:
---------------------------------------------------------------------------------------------------------
OpenBSD 3.1 (RAMDISKC) #231: Sat Apr 13 15:50:27 MDT 2002
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISKC
cpu0: Intel Pentium III (Tualatin) ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem = 266383360 (260140K)
avail mem = 243240960 (237540K)
using 3277 buffers containing 13422592 bytes (13108K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(28) BIOS, date 05/31/02, BIOS32 rev. 0 @ 0xfd890
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev. 2.1 @ 0xfd890/0x770
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc400! 0xcc800/0x800 0xd8000/0x4000! 0xdc000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x3575 rev 0x04
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x3577 rev 0x04
wsdisplay0 at vga1: console (80x25, vt100 emulation)
vendor "Intel", unknown product 0x3577 (class display, subclass
miscellaneous, rev 0x00) at pci0 dev 2 function 1 not configured
"Intel 82801CA/CAM USB" rev 0x02 at pci0 dev 29 function 0 not configured
"Intel 82801CA/CAM USB" rev 0x02 at pci0 dev 29 function 1 not configured
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci1 at ppb0 bus 1
xl0 at pci1 dev 1 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 10
address XX:XX:XX:XX:XX:XX
exphy0 at xl0 phy 24: 3Com internal media interface
cbb0 at pci1 dev 4 function 0 vendor "2 Micro Inc", unknown product 0x6972
rev 0x00: irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA
(unsupported), channel 0 configured to compatibility, channel 1 configured
to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK2018GAS>
wd0: 16-sector PIO, LBA, 19077MB, 16383 cyl, 16 head, 63 sec, 39070080 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA330, 1.50> SCSI0 5/cdrom
removable
"Intel 82801CA/CAM SMB" rev 0x02 at pci0 dev 31 function 3 not configured
"Intel 82801CA/CAM AC97 Audio" rev 0x02 at pci0 dev 31 function 5 not
configured
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c440 netmask c440 ttymask c442
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
fd0a: hard error writing fsbn 56 of 56-63 (st0 44<abnrml,top_head> st1
2<write_protect> st2 0 cyl 1 head 1 sec 3)
fd0a: hard error writing fsbn 56 of 56-63 (st0 44<abnrml,top_head> st1
2<write_protect> st2 0 cyl 1 head 1 sec 3)
fd0a: hard error writing fsbn 64 (st0 44<abnrml,top_head> st1
2<write_protect> st2 0 cyl 1 head 1 sec 11)
---------------------------------------------------------------------------------------------------------
thank you for your help.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.2.20020710142604.00bd9068>