Date: Wed, 19 Apr 2000 12:52:57 +0200 From: Eric RENAULT <Eric.Renault@prism.uvsq.fr> To: freebsd-scsi@FreeBSD.ORG Cc: Pierre DAVID <pda@prism.uvsq.fr> Subject: Problem with AIC6360 driver. Message-ID: <20000419125257.A16888@gibet.prism.uvsq.fr>
next in thread | raw e-mail | index | archive | help
Hello,
Up to last week, I was using FreeBSD 3.2 on my machine. Unfortunately, no
driver for the AIC 6360 component was available with this version. When
FreeBSD 4.0 became available, I saw that the AIC 6360 driver was CAMified.
Thus I upgraded to FreeBSD 4.0 last week. By the way, it still does not
work !
I do not know exactely the important information I should give to help
people to help me ... Thus, fell free to ask anything else !
Thanks for anyhelp,
Eric
* Machine :
-------
There are 2 SCSI cards :
- 1 Adaptec 2940UW for the Hard Drive and the CD-ROM drive ;
- 1 Adpatec AVA-1505 for the ZIP drive.
No problem with the 2940UW !
* Kernel configuration file :
-------------------------
In particularly, it contains :
options SCSI_DELAY=2000 #Delay (in ms) before probing SCSI
device isa
device pci
# SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
device aic0 at isa? port 0x340 irq 11
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
The port and IRQ information are the same as those taken by W95 (there
are the default ones).
* The boot log (partial) :
----------------------
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #7: Sat Apr 15 12:06:12 CEST 2000
root@saules.wanadoo.fr:/usr/src/sys/compile/SAULES
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 133637005 Hz
CPU: Pentium/P54C (133.64-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
...
config> di aic0
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
...
config> q
...
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xdf800000-0xdf80
0fff irq 10 at device 12.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
...
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <PIONEER CD-ROM DR-U12X 1.06> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 6 lun 0
da0: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
i.e. nothing about AIC except in the config part.
* The peripherals recognized by CAM :
---------------------------------
# camcontrol devlist -v
scbus0 on ahc0 bus 0:
<PIONEER CD-ROM DR-U12X 1.06> at scbus0 target 2 lun 0 (pass0,cd0)
<IBM DCAS-34330 S65A> at scbus0 target 6 lun 0 (pass1,da0)
< > at scbus0 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
--
Laboratoire PRiSM (Parallelisme Reseaux informatiques Systemes Modelisation)
Universite de Versailles - Saint-Quentin-en-Yvelines
45, avenue des Etats-Unis
F-78035 Versailles cedex
Phone : +33 1 39 25 44 26
Fax : +33 1 39 25 40 57
Email : Eric.Renault@prism.uvsq.fr
Wpage : http://www.prism.uvsq.fr/public/ere/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000419125257.A16888>