Date: Wed, 09 Oct 2002 22:25:43 -0400 From: Mike Jeays <jeays@statcan.ca> To: Matthew Emmerton <matt@gsicomp.on.ca> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ASUS P4S533 on-board LAN Message-ID: <3DA4E527.7B5A5D00@statcan.ca> References: <3DA48F47.C3EAF871@statcan.ca> <022601c26fd2$1536bf80$1200a8c0@gsicomp.on.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------D8AA9FABFE79B1079D8F23C6 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Matthew Emmerton wrote: > > > I recently bought a machine with an ASUS P4S533 motherboard, > > and FreeBSD 4.6 does not see the on-board LAN connection at > > boot-up time. (Yes, it is enabled in the BIOS.) > > > > Must I buy a separate LAN card, or is there a way to get the > > on board connection to work? > > > > Thanks in advance. > > Can you provide us the dmesg output that shows what FreeBSD is seeing? I'm > betting that it's seeing a 'sis' internet device but is spewing out an error > about the PHY. > > -- > Matt Emmerton Thanks for the advice, from you, Tim and and Kent. Here is the DMESG is attached. -- Mike Jeays : Informatics Technology Services Division, Statistics Canada Room 3200, Main Building, Holland Avenue, Ottawa, Ontario, K1A 0T6 Voice (613)-951-9929 Web page : http://www.ncf.carleton.ca/~ad161 --------------D8AA9FABFE79B1079D8F23C6 Content-Type: text/plain; charset=us-ascii; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium 4 (1816.18-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> real memory = 268419072 (262128K bytes) avail memory = 256262144 (250256K bytes) Preloaded elf kernel "kernel" at 0xc04d0000. md0: Malloc disk Using $PIR table, 10 entries at 0xc00f1b20 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <NVidia model 0171 graphics accelerator> at 0.0 irq 11 isab0: <PCI to ISA bridge (vendor=1039 device=0961)> at device 2.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 5 at device 2.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 9 at device 2.3 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiS 5591 ATA33 controller> port 0xd800-0xd80f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 sis0: <SiS 900 10/100BaseTX> at device 3.0 on pci0 sis0: couldn't map ports/memory device_probe_and_attach: sis0 attach returned 6 pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 5.0 pci0: <unknown card> (vendor=0x12b9, dev=0x1008) at 11.0 pcib1: <SiS 5591 host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA33 acd0: CD-RW <HL-DT-ST GCE-8320B> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a cd9660: RockRidge Extension --------------D8AA9FABFE79B1079D8F23C6-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DA4E527.7B5A5D00>