Date: Mon, 24 May 2004 15:14:58 -0400 From: "Robin P. Blanchard" <robin.blanchard@gactr.uga.edu> To: "John Baldwin" <jhb@FreeBSD.org> Cc: current@FreeBSD.org Subject: RE: Latest kernel hanging on amr (del 1550) Message-ID: <9B5C1FCAFB35084787C21EFFFA78DD9EE3A7@EBE1.gc.nat>
next in thread | raw e-mail | index | archive | help
> -----Original Message-----
> From: John Baldwin [mailto:jhb@FreeBSD.org]=20
> Sent: Monday, May 24, 2004 1:10 PM
> To: freebsd-current@FreeBSD.org
> Cc: Robin P. Blanchard; current@FreeBSD.org
> Subject: Re: Latest kernel hanging on amr (del 1550)
>=20
> On Sunday 23 May 2004 01:47 pm, Robin P. Blanchard wrote:
> > Latest kernel hangs after "waiting for SCSI devices to=20
> settle" on my=20
> > dell 1550. Seeing as how the amr driver hasn't changed in=20
> some time,=20
> > must be somewhere else. Maybe the geom_disk ? Anyone else=20
> seeing this=20
> > ? This is a smp box, so that may be an option also.
>=20
> It could be an interrupt issue. Try setting=20
> 'hint.apic.0.disabled=3D1' from the loader to see if the=20
> problem goes away. If so, pleas send me a boot -v dmesg.
Grabbed a new CVS snapshot and kernel still hangs at same place. Setting
hint.apic.0.disabled=3D1 didn't help, neither did =
hint.acpi.0.disabled=3D1.
Setting both induced a kernel panic. Here's a verbose boot from the =
older,
working kernel:
MP Configuration Table version 1.4 found at 0xc00f0000
APIC: Using the MPTable enumerator.
SMP: Added CPU 1 (BSP)
SMP: Added CPU 0 (AP)
MPTable: <DELL POWEREDGE DF>
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry =3D 0xffe90 (c00ffe90) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0xcb7e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0
Other BIOS signatures found:
ioapic0: Changing APIC ID to 2
ioapic0: Assuming intbase of 0
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic1: Changing APIC ID to 3
ioapic1: Assuming intbase of 16
ioapic1: intpin 0 -> irq 16 (level, activelo)
ioapic1: intpin 1 -> irq 17 (level, activelo)
ioapic1: intpin 2 -> irq 18 (level, activelo)
ioapic1: intpin 3 -> irq 19 (level, activelo)
ioapic1: intpin 4 -> irq 20 (level, activelo)
ioapic1: intpin 5 -> irq 21 (level, activelo)
ioapic1: intpin 6 -> irq 22 (level, activelo)
ioapic1: intpin 7 -> irq 23 (level, activelo)
ioapic1: intpin 8 -> irq 24 (level, activelo)
ioapic1: intpin 9 -> irq 25 (level, activelo)
ioapic1: intpin 10 -> irq 26 (level, activelo)
ioapic1: intpin 11 -> irq 27 (level, activelo)
ioapic1: intpin 12 -> irq 28 (level, activelo)
ioapic1: intpin 13 -> irq 29 (level, activelo)
ioapic1: intpin 14 -> irq 30 (level, activelo)
ioapic1: intpin 15 -> irq 31 (level, activelo)
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 7 trigger: level
ioapic0: intpin 7 polarity: low
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 9 trigger: edge
ioapic0: intpin 9 polarity: high
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: high
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
ioapic1: intpin 0 trigger: level
ioapic1: intpin 0 polarity: low
ioapic1: intpin 1 trigger: level
ioapic1: intpin 1 polarity: low
ioapic1: intpin 9 trigger: level
ioapic1: intpin 9 polarity: low
ioapic1: intpin 9 trigger: level
ioapic1: intpin 9 polarity: low
ioapic1: intpin 9 trigger: level
ioapic1: intpin 9 polarity: low
ioapic1: intpin 10 trigger: level
ioapic1: intpin 10 polarity: low
ioapic1: intpin 10 trigger: level
ioapic1: intpin 10 polarity: low
ioapic1: intpin 10 trigger: level
ioapic1: intpin 10 polarity: low
ioapic1: intpin 11 trigger: level
ioapic1: intpin 11 polarity: low
ioapic1: intpin 12 trigger: level
ioapic1: intpin 12 polarity: low
ioapic1: intpin 13 trigger: level
ioapic1: intpin 13 polarity: low
ioapic1: intpin 13 trigger: level
ioapic1: intpin 13 polarity: low
ioapic1: intpin 14 trigger: level
ioapic1: intpin 14 polarity: low
ioapic1: intpin 14 trigger: level
ioapic1: intpin 14 polarity: low
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: active-high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: active-high
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
cpu0 BSP:
ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source, Software, Yarrow>
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000270
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there =
(id=3D00081166)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00fc730
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 4 5 A 0x6b 3 4 5 6 7 10 11 14
embedded 4 5 B 0x6c 3 4 5 6 7 10 11 14
slot 1 1 4 A 0x69 3 4 5 6 7 10 11 14
slot 1 1 4 B 0x6a 3 4 5 6 7 10 11 14
slot 1 1 4 C 0x69 3 4 5 6 7 10 11 14
slot 1 1 4 D 0x6a 3 4 5 6 7 10 11 14
embedded 0 1 A 0x60 3 4 5 6 7 10 11 14
embedded 0 2 A 0x61 3 4 5 6 7 10 11 14
embedded 0 15 A 0x6f 3 4 5 6 7 10 11 14
slot 2 4 6 A 0x6d 3 4 5 6 7 10 11 14
slot 2 4 6 B 0x6e 3 4 5 6 7 10 11 14
slot 2 4 6 C 0x6d 3 4 5 6 7 10 11 14
slot 2 4 6 D 0x6e 3 4 5 6 7 10 11 14
pcib1: <MPTable Host-PCI bridge> at pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
found-> vendor=3D0x1011, dev=3D0x0026, revid=3D0x05
bus=3D1, slot=3D4, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns)
pcib2: <MPTable PCI-PCI bridge> at device 4.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 3
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfe900000-0xfebfffff
pcib2: prefetched decode 0xf8000000-0xfbffffff
pci2: <PCI bus> on pcib2
pci2: physical bus=3D2
found-> vendor=3D0x1011, dev=3D0x0026, revid=3D0x05
bus=3D2, slot=3D0, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns)
map[10]: type 4, range 32, base 0000dc00, size 8, enabled
pcib2: device (null) requested decoded I/O range 0xdc00-0xdcff
map[14]: type 1, range 32, base fe9ff000, size 12, enabled
pcib2: device (null) requested decoded memory range =
0xfe9ff000-0xfe9fffff
pcib2: slot 1 INTA routed to irq 26
found-> vendor=3D0x1077, dev=3D0x1216, revid=3D0x06
bus=3D2, slot=3D1, func=3D0
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 =
ns)
intpin=3Da, irq=3D26
powerspec 1 supports D0 D3 current D0
pcib3: <MPTable PCI-PCI bridge> at device 0.0 on pci2
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfeb00000-0xfebfffff
pcib3: prefetched decode 0xf8000000-0xfbffffff
pci3: <PCI bus> on pcib3
pci3: physical bus=3D3
map[10]: type 3, range 32, base f8000000, size 26, enabled
pcib3: device (null) requested decoded memory range =
0xf8000000-0xfbffffff
pcib2: device (null) requested decoded memory range =
0xf8000000-0xfbffffff
pcib3: slot 0 INTA routed to irq 25
found-> vendor=3D0x101e, dev=3D0x1960, revid=3D0x20
bus=3D3, slot=3D0, func=3D0
class=3D01-04-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0116, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D25
powerspec 2 supports D0 D3 current D0
amr0: <LSILogic MegaRAID> mem 0xf8000000-0xfbffffff irq 25 at device 0.0 =
on
pci3
amr0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
amr0: [GIANT-LOCKED]
amr0: <LSILogic PERC 3/DC> Firmware 196T, BIOS 3.33, 64MB RAM
pci2: <mass storage, SCSI> at device 1.0 (no driver attached)
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=3D0
found-> vendor=3D0x1166, dev=3D0x0008, revid=3D0x23
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1166, dev=3D0x0008, revid=3D0x01
bus=3D0, slot=3D0, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0147, statreg=3D0x2200, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1166, dev=3D0x0006, revid=3D0x01
bus=3D0, slot=3D0, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0142, statreg=3D0x2200, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1166, dev=3D0x0006, revid=3D0x01
bus=3D0, slot=3D0, func=3D3
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0142, statreg=3D0x2200, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[10]: type 1, range 32, base fe2ff000, size 12, enabled
map[14]: type 4, range 32, base 0000ecc0, size 6, enabled
map[18]: type 1, range 32, base fe100000, size 20, enabled
pcib0: slot 1 INTA routed to irq 16
found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x08
bus=3D0, slot=3D1, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000 =
ns)
intpin=3Da, irq=3D16
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fe2fe000, size 12, enabled
map[14]: type 4, range 32, base 0000ec80, size 6, enabled
map[18]: type 1, range 32, base fe000000, size 20, enabled
pcib0: slot 2 INTA routed to irq 17
found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x08
bus=3D0, slot=3D2, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000 =
ns)
intpin=3Da, irq=3D17
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
map[14]: type 4, range 32, base 0000e800, size 8, enabled
map[18]: type 1, range 32, base fe2fd000, size 12, enabled
found-> vendor=3D0x1002, dev=3D0x4752, revid=3D0x27
bus=3D0, slot=3D3, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x00a7, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[90]: type 4, range 32, base 00000580, size 4, enabled
found-> vendor=3D0x1166, dev=3D0x0200, revid=3D0x50
bus=3D0, slot=3D15, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0200, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 000008b0, size 4, enabled
found-> vendor=3D0x1166, dev=3D0x0211, revid=3D0x00
bus=3D0, slot=3D15, func=3D1
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0005, statreg=3D0x0200, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[10]: type 1, range 32, base fe2fc000, size 12, enabled
pcib0: unable to route slot 15 INTA
found-> vendor=3D0x1166, dev=3D0x0220, revid=3D0x04
bus=3D0, slot=3D15, func=3D2
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0117, statreg=3D0x0280, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 =
ns)
intpin=3Da, irq=3D7
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem
0xfe100000-0xfe1fffff,0xfe2ff000-0xfe2fffff irq 16 at device 1.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe2ff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 1028 00da 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:b0:d0:f0:81:21
fxp0: [GIANT-LOCKED]
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xec80-0xecbf mem
0xfe000000-0xfe0fffff,0xfe2fe000-0xfe2fefff irq 17 at device 2.0 on pci0
fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe2fe000
fxp1: using memory space register mapping
fxp1: PCI IDs: 8086 1229 1028 00da 0008
fxp1: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
fxp1: Ethernet address: 00:b0:d0:f0:81:22
fxp1: [GIANT-LOCKED]
pci0: <display, VGA> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port
0x8b0-0x8bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8b0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata0-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata0-slave: stat=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0xdf
ata0: reset tp2 mask=3D03 stat0=3D00 stat1=3D00 =
devices=3D0x4<ATAPI_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib4: <MPTable Host-PCI bridge> at pcibus 4 on motherboard
pci4: <PCI bus> on pcib4
pci4: physical bus=3D4
map[10]: type 4, range 32, base 0000cc00, size 8, enabled
map[14]: type 1, range 64, base fe6ff000, size 12, enabled
pcib4: slot 5 INTA routed to irq 27
found-> vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01
bus=3D4, slot=3D5, func=3D0
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x28 (10000 ns), maxlat=3D0x19 (6250 =
ns)
intpin=3Da, irq=3D27
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000c800, size 8, enabled
map[14]: type 1, range 64, base fe6fe000, size 12, enabled
pcib4: slot 5 INTB routed to irq 28
found-> vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01
bus=3D4, slot=3D5, func=3D1
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x28 (10000 ns), maxlat=3D0x19 (6250 =
ns)
intpin=3Db, irq=3D28
powerspec 2 supports D0 D3 current D0
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xcc00-0xccff mem
0xfe6ff000-0xfe6fffff irq 27 at device 5.0 on pci4
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xcc00
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x28485560
ahc0: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem
0xfe6fe000-0xfe6fefff irq 28 at device 5.1 on pci4
ahc1: Defaulting to MEMIO off
ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 423 instructions downloaded
ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x28485560
ahc1: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs
cpu0 on motherboard
cpu1 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnpbios: 15 devices, largest 118 bytes
PNP0c02: adding fixed memory32 range 0-0x9ffff, size=3D0xa0000
PNP0c02: adding fixed memory32 range 0x100000-0x7fffffff, =
size=3D0x7ff00000
PNP0c02: adding fixed memory32 range 0xff000000-0xffffffff, =
size=3D0x1000000
PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=3D0x10000
PNP0c02: adding fixed memory32 range 0xec000-0xeffff, size=3D0x4000
PNP0c02: adding io range 0x800-0x88f, size=3D0x90, align=3D0x1
PNP0c02: adding io range 0x580-0x58f, size=3D0x10, align=3D0x1
PNP0c02: adding io range 0x62-0x63, size=3D0x2, align=3D0x1
PNP0c02: adding io range 0x65-0x6f, size=3D0xb, align=3D0x1
PNP0c02: adding io range 0xe0-0xef, size=3D0x10, align=3D0x1
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0x8
pnpbios: handle 1 device ID PNP0501 (0105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=3D0x6, align=3D0x8
PNP0700: adding dma mask 0x4
pnpbios: handle 2 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 3 device ID PNP0f13 (130fd041)
PNP0a03: adding io range 0xcf8-0xcff, size=3D0x8, align=3D0x1
pnpbios: handle 4 device ID PNP0a03 (030ad041)
PNP0c02: adding irq mask 0x200
pnpbios: handle 5 device ID PNP0c02 (020cd041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x5f, size=3D0x20, align=3D0x1
pnpbios: handle 8 device ID PNP0100 (0001d041)
PNP0200: adding io range 0x80-0x9f, size=3D0x20, align=3D0x1
PNP0200: adding io range 0-0x1f, size=3D0x20, align=3D0x1
PNP0200: adding io range 0xc0-0xdf, size=3D0x20, align=3D0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 9 device ID PNP0200 (0002d041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=3D0x1, align=3D0x1
PNP0303: adding io range 0x64-0x64, size=3D0x1, align=3D0x1
pnpbios: handle 10 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=3D0x1, align=3D0x1
pnpbios: handle 11 device ID PNP0800 (0008d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x7f, size=3D0x10, align=3D0x1
pnpbios: handle 12 device ID PNP0b00 (000bd041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=3D0x10, align=3D0x1
pnpbios: handle 13 device ID PNP0c04 (040cd041)
PNP0c01: adding io range 0xc00-0xc01, size=3D0x2, align=3D0x1
PNP0c01: adding io range 0xc06-0xc08, size=3D0x3, align=3D0x1
PNP0c01: adding io range 0xc14-0xc14, size=3D0x1, align=3D0x1
PNP0c01: adding io range 0xc50-0xc52, size=3D0x3, align=3D0x1
PNP0c01: adding io range 0xc6c-0xc6f, size=3D0x4, align=3D0x1
PNP0c01: adding io range 0xcd6-0xcd7, size=3D0x2, align=3D0x1
PNP0c01: adding io range 0xf50-0xf57, size=3D0x8, align=3D0x1
pnpbios: handle 15 device ID PNP0c01 (010cd041)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x6003 0x6011 0x6001 0x6001
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x6001 0x6001 0x6001 0x6001
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x580-0x58f,0x800-0x88f iomem
0xec000-0xeffff,0xf0000-0xfffff,0xff000000-0xffffffff,0x100000-0x7fffffff=
,0-0
x9ffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
Device configuration finished.
Timecounter "TSC" frequency 993332371 Hz quality -100
Timecounters tick every 10.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin
ata0-master: setting PIO4 on ServerWorks ROSB4 chip
acd0: <SAMSUNG CD-ROM SN-124/q008> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 2 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 17278MB (35385344 sectors) RAID 1 (optimal)
GEOM: new disk amrd0
[0] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/162/8 s:0 l:35385344
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure amrd0s1, start 0 length 18117296128 end 18117296127
GEOM: Configure amrd0a, start 0 length 134217728 end 134217727
GEOM: Configure amrd0b, start 134217728 length 2147483648 end 2281701375
GEOM: Configure amrd0c, start 0 length 18117296128 end 18117296127
GEOM: Configure amrd0d, start 2281701376 length 268435456 end 2550136831
GEOM: Configure amrd0e, start 2550136832 length 4294967296 end =
6845104127
GEOM: Configure amrd0f, start 6845104128 length 4294967296 end =
11140071423
GEOM: Configure amrd0g, start 11140071424 length 6977224704 end =
18117296127
GEOM: Configure amrd0s1a, start 0 length 134217728 end 134217727
GEOM: Configure amrd0s1b, start 134217728 length 2147483648 end =
2281701375
GEOM: Configure amrd0s1c, start 0 length 18117296128 end 18117296127
GEOM: Configure amrd0s1d, start 2281701376 length 268435456 end =
2550136831
GEOM: Configure amrd0s1e, start 2550136832 length 4294967296 end =
6845104127
GEOM: Configure amrd0s1f, start 6845104128 length 4294967296 end =
11140071423
GEOM: Configure amrd0s1g, start 11140071424 length 6977224704 end =
18117296127
(probe3:amr0:0:3:0): error 22
(probe3:amr0:0:3:0): Unretryable Error
(probe15:amr0:1:0:0): error 22
(probe15:amr0:1:0:0): Unretryable Error
(probe16:amr0:1:1:0): error 22
(probe16:amr0:1:1:0): Unretryable Error
(probe4:amr0:0:4:0): error 22
(probe4:amr0:0:4:0): Unretryable Error
(probe17:amr0:1:2:0): error 22
(probe17:amr0:1:2:0): Unretryable Error
(probe5:amr0:0:5:0): error 22
(probe5:amr0:0:5:0): Unretryable Error
(probe18:amr0:1:3:0): error 22
(probe18:amr0:1:3:0): Unretryable Error
(probe7:amr0:0:8:0): error 22
(probe7:amr0:0:8:0): Unretryable Error
(probe19:amr0:1:4:0): error 22
(probe19:amr0:1:4:0): Unretryable Error
(probe8:amr0:0:9:0): error 22
(probe8:amr0:0:9:0): Unretryable Error
ahc0: Selection Timeout on A:0. 0 SCBs aborted
ahc1: Selection Timeout on A:0. 0 SCBs aborted
(probe20:amr0:1:5:0): error 22
(probe20:amr0:1:5:0): Unretryable Error
(probe9:amr0:0:10:0): error 22
(probe9:amr0:0:10:0): Unretryable Error
ahc0: Selection Timeout on A:1. 0 SCBs aborted
ahc1: Selection Timeout on A:1. 0 SCBs aborted
(probe21:amr0:1:6:0): error 22
(probe21:amr0:1:6:0): Unretryable Error
(probe10:amr0:0:11:0): error 22
(probe10:amr0:0:11:0): Unretryable Error
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc1: Selection Timeout on A:2. 0 SCBs aborted
(probe22:amr0:1:8:0): error 22
(probe22:amr0:1:8:0): Unretryable Error
(probe11:amr0:0:12:0): error 22
(probe11:amr0:0:12:0): Unretryable Error
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc1: Selection Timeout on A:3. 0 SCBs aborted
(probe29:amr0:1:15:0): error 22
(probe29:amr0:1:15:0): Unretryable Error
(probe12:amr0:0:13:0): error 22
(probe12:amr0:0:13:0): Unretryable Error
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc1: Selection Timeout on A:4. 0 SCBs aborted
(probe23:amr0:1:9:0): error 22
(probe23:amr0:1:9:0): Unretryable Error
(probe13:amr0:0:14:0): error 22
(probe13:amr0:0:14:0): Unretryable Error
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc1: Selection Timeout on A:15. 0 SCBs aborted
(probe24:amr0:1:10:0): error 22
(probe24:amr0:1:10:0): Unretryable Error
(probe14:amr0:0:15:0): error 22
(probe14:amr0:0:15:0): Unretryable Error
(probe1:amr0:0:1:0): error 22
(probe1:amr0:0:1:0): Unretryable Error
(probe2:amr0:0:2:0): error 22
(probe2:amr0:0:2:0): Unretryable Error
(probe0:amr0:0:0:0): error 22
(probe0:amr0:0:0:0): Unretryable Error
ahc0: Selection Timeout on A:15. 0 SCBs aborted
ahc1: Selection Timeout on A:5. 0 SCBs aborted
(probe25:amr0:1:11:0): error 22
(probe25:amr0:1:11:0): Unretryable Error
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc1: Selection Timeout on A:6. 0 SCBs aborted
(probe26:amr0:1:12:0): error 22
(probe26:amr0:1:12:0): Unretryable Error
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc1: Selection Timeout on A:8. 0 SCBs aborted
(probe27:amr0:1:13:0): error 22
(probe27:amr0:1:13:0): Unretryable Error
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc1: Selection Timeout on A:9. 0 SCBs aborted
(probe28:amr0:1:14:0): error 22
(probe28:amr0:1:14:0): Unretryable Error
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc1: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc1: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc1: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc1: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc1: Selection Timeout on A:14. 0 SCBs aborted
ses0 at amr0 bus 0 target 6 lun 0
ses0: <DELL 1x3 U2W SCSI BP 1.21> Fixed Processor SCSI-2 device=20
ses0: Serial Number 1
ses0: SAF-TE Compliant Device
pass0 at amr0 bus 0 target 6 lun 0
pass0: <DELL 1x3 U2W SCSI BP 1.21> Fixed Processor SCSI-2 device=20
pass0: Serial Number 1
pt0 at amr0 bus 0 target 6 lun 0
pt0: <DELL 1x3 U2W SCSI BP 1.21> Fixed Processor SCSI-2 device=20
pt0: Serial Number 1
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 0
ioapic0: routing intpin 6 (IRQ 6) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 12 (IRQ 12) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 14 (IRQ 14) to cluster 0
ioapic0: routing intpin 15 (IRQ 15) to cluster 0
ioapic1: routing intpin 0 (IRQ 16) to cluster 0
ioapic1: routing intpin 1 (IRQ 17) to cluster 0
ioapic1: routing intpin 9 (IRQ 25) to cluster 0
ioapic1: routing intpin 11 (IRQ 27) to cluster 0
ioapic1: routing intpin 12 (IRQ 28) to cluster 0
Mounting root from ufs:/dev/amrd0s1a
start_init: trying /sbin/init
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
---------------------------------------
Robin P. Blanchard
Systems Integration Specialist
Georgia Center for Continuing Education
fon: 706.542.2404 < > fax: 706.542.6546
---------------------------------------
=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9B5C1FCAFB35084787C21EFFFA78DD9EE3A7>