From owner-freebsd-arm@freebsd.org Tue Aug 13 21:30:45 2019 Return-Path: Delivered-To: freebsd-arm@mailman.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.nyi.freebsd.org (Postfix) with ESMTP id 5FC0EBD847 for ; Tue, 13 Aug 2019 21:30:45 +0000 (UTC) (envelope-from mit@perftech.com) Received: from smtp-gw.pt.net (smtp-gw.pt.net [206.210.194.15]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "smtp-gw.pt.net", Issuer "Let's Encrypt Authority X3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 467Qqm2phVz4Rlf for ; Tue, 13 Aug 2019 21:30:43 +0000 (UTC) (envelope-from mit@perftech.com) X-ASG-Debug-ID: 1565731832-09411a01d2252470001-ZNVAc5 Received: from mail.pt.net (mail.pt.net [206.210.194.11]) by smtp-gw.pt.net with ESMTP id FK2akbU4xVdUrpmf (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO); Tue, 13 Aug 2019 16:30:33 -0500 (CDT) X-Barracuda-Envelope-From: mit@perftech.com X-Barracuda-Effective-Source-IP: mail.pt.net[206.210.194.11] X-Barracuda-Apparent-Source-IP: 206.210.194.11 Received: from localhost (localhost [IPv6:::1]) by mail.pt.net (Postfix) with ESMTP id E3C4D841DA7; Tue, 13 Aug 2019 16:30:32 -0500 (CDT) Received: from mail.pt.net ([IPv6:::1]) by localhost (mail.pt.net [IPv6:::1]) (amavisd-new, port 10032) with ESMTP id QfDJSNnS4qjv; Tue, 13 Aug 2019 16:30:31 -0500 (CDT) Received: from localhost (localhost [IPv6:::1]) by mail.pt.net (Postfix) with ESMTP id 4AED1841DA4; Tue, 13 Aug 2019 16:30:31 -0500 (CDT) X-Virus-Scanned: amavisd-new at pt.net Received: from mail.pt.net ([IPv6:::1]) by localhost (mail.pt.net [IPv6:::1]) (amavisd-new, port 10026) with ESMTP id Ky_W0wsiZW6R; Tue, 13 Aug 2019 16:30:31 -0500 (CDT) Received: from mail.pt.net (mail.pt.net [206.210.194.11]) by mail.pt.net (Postfix) with ESMTP id 235DB841DA7; Tue, 13 Aug 2019 16:30:31 -0500 (CDT) Date: Tue, 13 Aug 2019 16:30:31 -0500 (CDT) From: Mit Matelske To: =?iso-8859-1?Q?S=F8ren?= Schmidt Cc: Marcin Wojtas , freebsd-arm Message-ID: <1021311926.304550.1565731831094.JavaMail.zimbra@perftech.com> In-Reply-To: <45CD194B-8533-42B7-9FE8-B2C8C03F4422@gmail.com> References: <1565435583431-0.post@n6.nabble.com> <1F22D8DA-E583-4858-911F-F057EC1A30E0@gmail.com> <532380450.3296650.1565636798211.JavaMail.zimbra@perftech.com> <4A647617-EEC0-4A75-ADF6-3D3F553F9AFF@gmail.com> <1634814667.34671.1565644485029.JavaMail.zimbra@perftech.com> <45CD194B-8533-42B7-9FE8-B2C8C03F4422@gmail.com> Subject: Re: Espressobin anyone ? MIME-Version: 1.0 X-ASG-Orig-Subj: Re: Espressobin anyone ? X-Mailer: Zimbra 8.8.15_GA_3829 (ZimbraWebClient - GC76 (Linux)/8.8.15_GA_3829) Thread-Topic: Espressobin anyone ? Thread-Index: j6GE7QVhTGvfR/tFl8GPh7S9BUznqA== X-Barracuda-Connect: mail.pt.net[206.210.194.11] X-Barracuda-Start-Time: 1565731833 X-Barracuda-Encrypted: ECDHE-RSA-AES256-GCM-SHA384 X-Barracuda-URL: https://smtp-gw.pt.net:443/cgi-mod/mark.cgi X-Virus-Scanned: by bsmtpd at pt.net X-Barracuda-Scan-Msg-Size: 61248 X-Barracuda-BRTS-Status: 1 X-Barracuda-Spam-Score: 0.50 X-Barracuda-Spam-Status: No, SCORE=0.50 using global scores of TAG_LEVEL=1000.0 QUARANTINE_LEVEL=1000.0 KILL_LEVEL=9.0 tests=BSF_RULE7568M, HTML_MESSAGE X-Barracuda-Spam-Report: Code version 3.2, rules version 3.2.3.75245 Rule breakdown below pts rule name description ---- ---------------------- -------------------------------------------------- 0.00 HTML_MESSAGE BODY: HTML included in message 0.50 BSF_RULE7568M Custom Rule 7568M X-Rspamd-Queue-Id: 467Qqm2phVz4Rlf X-Spamd-Bar: / Authentication-Results: mx1.freebsd.org; dkim=none; dmarc=none; spf=pass (mx1.freebsd.org: domain of mit@perftech.com designates 206.210.194.15 as permitted sender) smtp.mailfrom=mit@perftech.com X-Spamd-Result: default: False [-0.99 / 15.00]; ARC_NA(0.00)[]; NEURAL_HAM_MEDIUM(-0.82)[-0.823,0]; FROM_HAS_DN(0.00)[]; RCPT_COUNT_THREE(0.00)[3]; R_SPF_ALLOW(-0.20)[+mx]; IP_SCORE(0.15)[asn: 3549(0.80), country: US(-0.05)]; TAGGED_RCPT(0.00)[]; MIME_GOOD(-0.10)[multipart/alternative,text/plain]; DMARC_NA(0.00)[pt.net]; SH_EMAIL_DBL_DONT_QUERY_IPS(0.00)[0.0.117.48,0.0.46.224]; NEURAL_HAM_LONG(-0.91)[-0.908,0]; MIME_TRACE(0.00)[0:+,1:+,2:~]; TO_DN_ALL(0.00)[]; NEURAL_HAM_SHORT(-0.41)[-0.413,0]; TO_MATCH_ENVRCPT_SOME(0.00)[]; RCVD_TLS_LAST(0.00)[]; FREEMAIL_TO(0.00)[gmail.com]; FORGED_SENDER(0.30)[mit@pt.net,mit@perftech.com]; R_DKIM_NA(0.00)[]; SUBJECT_ENDS_QUESTION(1.00)[]; ASN(0.00)[asn:3549, ipnet:206.210.192.0/19, country:US]; FROM_NEQ_ENVFROM(0.00)[mit@pt.net,mit@perftech.com]; RCVD_COUNT_SEVEN(0.00)[7]; SH_EMAIL_ZRD(0.00)[0.0.46.224,0.0.117.48] Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.29 X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: "Porting FreeBSD to ARM processors." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 13 Aug 2019 21:30:45 -0000 Soren-=20 Thanks for the code snippet! That will fix one of the problems.=20 I still can't mount my filesystem, though. I think I'm doing something real= ly simple, wrong. I believe I'm running the latest code and added some prin= tfs to show the kernel setting the regulator:=20 usbus1 on ehci0=20 syscon_generic4: mem 0x5f800-0x5ffff on simplebus1=20 sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) =3D 19=20 sdhci_xenon0: vqmmc-supply regulator found=20 sdhci_xenon0: mem 0xd0000-0xd02ff,0x1e808-0= x1e80b irq 24 on simplebus1=20 ahci0: mem 0xe0000-0xe0177 irq 26 on simplebus1=20 Could there be a problem with how I am setting up my filesystem? I've tried= both freebsd-ufs and freebsd as the type, with no luck. A gpart listing of= my SD card:=20 root@fbl:~ # gpart list da3=20 Geom name: da3=20 modified: false=20 state: OK=20 fwheads: 255=20 fwsectors: 63=20 last: 62521335=20 first: 3=20 entries: 4=20 scheme: GPT=20 Providers:=20 1. Name: da3p1=20 Mediasize: 41943040 (40M)=20 Sectorsize: 512=20 Stripesize: 0=20 Stripeoffset: 1536=20 Mode: r0w0e0=20 efimedia: HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x14000)=20 rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0=20 rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b=20 label: (null)=20 length: 41943040=20 offset: 1536=20 type: efi=20 index: 1=20 end: 81922=20 start: 3=20 2. Name: da3p2=20 Mediasize: 31968979456 (30G)=20 Sectorsize: 512=20 Stripesize: 0=20 Stripeoffset: 41944576=20 Mode: r0w0e0=20 efimedia: HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x3b8bff5)= =20 rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0=20 rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b=20 label: (null)=20 length: 31968979456=20 offset: 41944576=20 type: freebsd-ufs=20 index: 2=20 end: 62521335=20 start: 81923=20 Consumers:=20 1. Name: da3=20 Mediasize: 32010928128 (30G)=20 Sectorsize: 512=20 Mode: r0w0e0=20 Thanks!!=20 Mit=20 From: "S=C3=B8ren Schmidt" =20 To: "Marcin Wojtas" =20 Cc: "Mit Matelske" , "freebsd-arm" =20 Sent: Tuesday, August 13, 2019 12:55:09 PM=20 Subject: Re: Espressobin anyone ?=20 Hi=20 That doesn=E2=80=99t seen to work on the espressobin, or least I can=E2=80= =99t get it to pick it up.=20 I use this patch as a workaround:=20 Index: main.c=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=20 --- main.c (revision 350496)=20 +++ main.c (working copy)=20 @@ -463,6 +462,13 @@=20 int rv;=20 char *rootdev;=20 +#if defined(__aarch64__)=20 + /* SOS HACK in rootdev, at least Espressobin gets this wrong */=20 + printf("Setting currdev hack\n");=20 + set_currdev("disk0p2");=20 + return (0);=20 +#endif=20 +=20 /*=20 * First choice: if rootdev is already set, use that, even if=20 * it's wrong.=20 Its not pretty but it does the job until I get time to look into why bootar= gs aren=E2=80=99t passed / won=E2=80=99t stick, probably something I havn= =E2=80=99t backported to my -stable12 sources yet...=20 -S=C3=B8ren=20 On 13 Aug 2019, at 01.38, Marcin Wojtas < [ mailto:mw@semihalf.com | mw@sem= ihalf.com ] > wrote:=20 Hi,=20 Not sure if it's what you are looking for, but in order to autoboot, I=20 simply pass 'rootdev=3DdiskXpY' in the bootargs variable. Here's example fr= om=20 A3720-DB (same should work on EspressoBin):=20 Marvell>> set bootargs "rootdev=3Ddisk1p1";usb reset; fatload usb 0:1=20 ${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 ${kernel_addr}=20 boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}=20 resetting USB...=20 USB0: Register 2000104 NbrPorts 2=20 Starting the controller=20 USB XHCI 1.00=20 USB1: USB EHCI 1.00=20 - ______ ____ _____ _____=20 | ____| | _ \ / ____| __ \=20 | |___ _ __ ___ ___ | |_) | (___ | | | |=20 | ___| '__/ _ \/ _ \| _ < \___ \| | | |=20 | | | | | __/ __/| |_) |____) | |__| |=20 | | | | | | || | | |=20 |_| |_| \___|\___||____/|_____/|_____/=20 ```=20 `=20 =E2=95=94=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2= =95=90=E2=95=90=E2=95=90=E2=95=90Welcome to FreeBSD=E2=95=90=E2=95=90=E2=95= =90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90= =E2=95=90=E2=95=97 s` `.....---.......--.```=20 -/=20 =E2=95=91 =E2=95=91 +o .--` /y:`=20 +.=20 =E2=95=91 1. Boot Multi user [Enter] =E2=95=91 yo`:. :o=20 `+-=20 =E2=95=91 2. Boot Single user =E2=95=91 y/ -/` -o/=20 =E2=95=91 3. Escape to loader prompt =E2=95=91 .-=20 ::/sy+:.=20 =E2=95=91 4. Reboot =E2=95=91 / `--=20 /=20 =E2=95=91 =E2=95=91 `:=20 :`=20 =E2=95=91 Options: =E2=95=91 `:=20 :`=20 =E2=95=91 5. Kernel: default/kernel (1 of 1) =E2=95=91 /=20 /=20 =E2=95=91 6. Boot Options =E2=95=91 .-=20 -.=20 =E2=95=91 =E2=95=91 -- -.=20 =E2=95=91 =E2=95=91 `:` `:`=20 =E2=95=91 =E2=95=91 .-- `--.=20 =E2=95=9A=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2= =95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95= =90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90= =E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2= =95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95= =90=E2=95=9D .---.....----.=20 Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop=20 Loading kernel...=20 /boot/kernel/kernel text=3D0x95047c data=3D0x1919d0+0x84aa94=20 syms=3D[0x8+0x13aaa8+0x8+0x12610d]=20 Loading configured modules...=20 can't find '/boot/entropy'=20 Using DTB provided by EFI at 0x8000000.=20 ---<>---=20 KDB: debugger backends: ddb=20 KDB: current backend: ddb=20 Copyright (c) 1992-2019 The FreeBSD Project.=20 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=20 The Regents of the University of California. All rights reserved.=20 FreeBSD is a registered trademark of The FreeBSD Foundation.=20 FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) GENERIC arm64=20 FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM= =20 8.0.0)=20 WARNING: WITNESS option enabled, expect reduced performance.=20 VT: init without driver.=20 Starting CPU 1 (1)=20 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs=20 [...]=20 Best regards,=20 Marcin=20 pon., 12 sie 2019 o 23:14 Mit Matelske < [ mailto:mit@pt.net | mit@pt.net ]= > napisa=C5=82(a):=20 BQ_BEGIN Soren-=20 Thanks for the quick response. I built this kernel with revision 350924.=20 I'll dig into whats going on in the morning.=20 Mind posting your diff for your loader.efi?=20 Thanks again!=20 Mit=20 ----- Original Message -----=20 From: "S=C3=B8ren Schmidt" < [ mailto:soren.schmidt@gmail.com | soren.schmi= dt@gmail.com ] >=20 To: "Mit Matelske" < [ mailto:mit@pt.net | mit@pt.net ] >=20 Cc: "tscho" < [ mailto:johannes@t-beutel.com | johannes@t-beutel.com ] >, "= freebsd-arm" <=20 [ mailto:freebsd-arm@freebsd.org | freebsd-arm@freebsd.org ] >=20 Sent: Monday, August 12, 2019 3:49:48 PM=20 Subject: Re: Espressobin anyone ?=20 Hi=20 Looks like your sources may be too old, you need to be at least at r348882= =20 to get the fix for the SD card VCC regulator.=20 That change fixed it for me backported to 12-stable...=20 The currdev problem still exists, I have it hardwired in my loader for=20 aarch64 :)=20 -S=C3=B8ren=20 BQ_BEGIN On 12 Aug 2019, at 21.06, Mit Matelske < [ mailto:mit@pt.net | mit@pt.net ]= > wrote:=20 I'm having a couple little hiccups booting this board also. One has=20 been commented on already, that I can't get the loader to automatically=20 start loading the kernel on "disk0p2"...=20 BQ_BEGIN The second, is that the kernel can't find the SD card after booting so=20 BQ_END it can't mount the root filesystem. I'm using the dts/dtb and kernel from= =20 the 13-current branch.=20 BQ_BEGIN Thanks for any and all help. I haven't used u-boot in about decade.=20 BQ_END Spoiled by the x86 platform.=20 BQ_BEGIN Mit Matelske=20 ***U-boot environment:***=20 Marvell>> printenv=20 baudrate=3D115200=20 bootargs=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000=20 BQ_END root=3D/dev/mmcblk0p1 rw rootwait net.ifnames=3D0 biosdevname=3D0=20 BQ_BEGIN bootcmd=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc= =20 BQ_END 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr=20 BQ_BEGIN bootdelay=3D2=20 bootmmc=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload mmc= =20 BQ_END 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr=20 BQ_BEGIN console=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000=20 eth1addr=3D00:51:82:11:22:01=20 eth2addr=3D00:51:82:11:22:02=20 eth3addr=3D00:51:82:11:22:03=20 ethact=3Dneta@30000=20 ethaddr=3DF0:AD:4E:09:6B:8F=20 ethprime=3Deth0=20 fdt_addr=3D0x4f00000=20 fdt_high=3D0xffffffffffffffff=20 fdt_name=3Defi/boot/armada-3720-espressobin.dtb=20 fdtcontroladdr=3D3f7161b8=20 gatewayip=3D10.4.50.254=20 get_images=3Dtftpboot $kernel_addr $image_name; tftpboot $fdt_addr=20 BQ_END $fdt_name; run get_ramfs=20 BQ_BEGIN get_ramfs=3Dif test "${ramfs_name}" !=3D "-"; then setenv ramfs_addr=20 BQ_END 0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramfs_addr -;fi=20 BQ_BEGIN hostname=3Dmarvell=20 image_name=3Defi/freebsd/loader.efi=20 initrd_addr=3D0xa00000=20 initrd_size=3D0x2000000=20 ipaddr=3D0.0.0.0=20 kernel_addr=3D0x5000000=20 loadaddr=3D0x5000000=20 netdev=3Deth0=20 netmask=3D255.255.255.0=20 ramfs_addr=3D0x8000000=20 ramfs_name=3D-=20 root=3Droot=3D/dev/nfs rw=20 rootpath=3D/srv/nfs/=20 serverip=3D0.0.0.0=20 set_bootargs=3Dsetenv bootargs $console $root=20 BQ_END ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none=20 nfsroot=3D$serverip:$rootpath $extra_params=20 BQ_BEGIN stderr=3Dserial@12000=20 stdin=3Dserial@12000=20 stdout=3Dserial@12000=20 ***Full boot logs:***=20 U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:10 +0800)=20 Model: Marvell Armada 3720 Community Board ESPRESSOBin=20 CPU @ 1000 [MHz]=20 L2 @ 800 [MHz]=20 TClock @ 200 [MHz]=20 DDR @ 800 [MHz]=20 DRAM: 1 GiB=20 U-Boot DT blob at : 000000003f7161b8=20 Comphy-0: USB3 5 Gbps=20 Comphy-1: PEX0 2.5 Gbps=20 Comphy-2: SATA0 6 Gbps=20 SATA link 0 timeout.=20 AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode=20 flags: ncq led only pmp fbss pio slum part sxs=20 PCIE-0: Link down=20 MMC: sdhci@d0000: 0, sdhci@d8000: 1=20 SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB,=20 BQ_END total 4 MiB=20 BQ_BEGIN Net: eth0: neta@30000 [PRIME]=20 Hit any key to stop autoboot: 0=20 switch to partitions #0, OK=20 mmc0 is current device=20 reading efi/freebsd/loader.efi=20 603872 bytes read in 49 ms (11.8 MiB/s)=20 reading efi/boot/armada-3720-espressobin.dtb=20 15946 bytes read in 17 ms (916 KiB/s)=20 ## Starting EFI application at 05000000 ...=20 Scanning disk [ mailto:sdhci@d0000.blk | sdhci@d0000.blk ] ...=20 Card did not respond to voltage select!=20 mmc_init: -95, time 50=20 Found 1 disks=20 Consoles: EFI console=20 FreeBSD/arm64 EFI loader, Revision 1.1=20 Command line arguments: loader.efi=20 EFI version: 2.05=20 EFI Firmware: Das U-boot (rev 0.00)=20 Console: efi (0)=20 Failed to find bootable partition=20 Startup error in /boot/lua/loader.lua: seconds=20 LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.=20 can't load 'kernel'=20 Type '?' for a list of commands, 'help' for more detailed help.=20 OK=20 OK set currdev=3Ddisk0p2=20 OK boot=20 /boot/kernel/kernel text=3D0x97d6a0 data=3D0x191b50+0x84ae94=20 BQ_END syms=3D[0x8+0x137dd8+0x8+0x126260]=20 BQ_BEGIN Using DTB provided by EFI at 0x8000000.=20 ---<>---=20 KDB: debugger backends: ddb=20 KDB: current backend: ddb=20 Copyright (c) 1992-2019 The FreeBSD Project.=20 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=20 The Regents of the University of California. All rights reserved.=20 FreeBSD is a registered trademark of The FreeBSD Foundation.=20 FreeBSD 13.0-CURRENT GENERIC arm64=20 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on=20 BQ_END LLVM 6.0.1)=20 BQ_BEGIN WARNING: WITNESS option enabled, expect reduced performance.=20 VT: init without driver.=20 Starting CPU 1 (1)=20 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs=20 arc4random: WARNING: initial seeding bypassed the cryptographic random=20 BQ_END device because it was not yet seeded and the knob 'bypass_before_seeding'= =20 was enabled.=20 BQ_BEGIN random: entropy device external interface=20 MAP 3e681000 mode 2 pages 1=20 MAP 3ffa6000 mode 2 pages 1=20 kbd0 at kbdmux0=20 ofwbus0: =20 simplebus0: on ofwbus0=20 simplebus1: on simplebus0=20 simple_mfd0: mem=20 BQ_END 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1=20 BQ_BEGIN simple_mfd1: mem=20 BQ_END 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1=20 BQ_BEGIN psci0: on ofwbus0=20 gic0: mem=20 BQ_END 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d9= 1fff,0x1da0000-0x1dbffff=20 irq 27 on simplebus1=20 BQ_BEGIN gpio0: mem=20 BQ_END 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on= =20 simple_mfd0=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpio0: mem=20 BQ_END 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpioregulator0: on ofwbus0=20 gpioregulator0: cannot get pin 0=20 gpioregulator0: cannot parse parameters=20 device_attach: gpioregulator0 attach returned 6=20 generic_timer0: irq 0,1,2,3 on ofwbus0=20 Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000=20 Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000=20 gpio0: mem=20 BQ_END 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on= =20 simple_mfd0=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpio0: mem=20 BQ_END 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpioregulator0: on ofwbus0=20 gpioregulator0: cannot get pin 0=20 gpioregulator0: cannot parse parameters=20 device_attach: gpioregulator0 attach returned 6=20 gpio0: mem=20 BQ_END 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on= =20 simple_mfd0=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpio0: mem=20 BQ_END 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpioregulator0: on ofwbus0=20 gpioregulator0: cannot get pin 0=20 gpioregulator0: cannot parse parameters=20 device_attach: gpioregulator0 attach returned 6=20 gpio0: mem=20 BQ_END 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on= =20 simple_mfd0=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpio0: mem=20 BQ_END 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpioregulator0: on ofwbus0=20 gpioregulator0: cannot get pin 0=20 gpioregulator0: cannot parse parameters=20 device_attach: gpioregulator0 attach returned 6=20 gpio0: mem=20 BQ_END 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on= =20 simple_mfd0=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpio0: mem=20 BQ_END 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 gpioregulator0: on ofwbus0=20 gpioregulator0: cannot get pin 0=20 gpioregulator0: cannot parse parameters=20 device_attach: gpioregulator0 attach returned 6=20 cpulist0: on ofwbus0=20 cpu0: on cpulist0=20 cpu1: on cpulist0=20 pmu0: irq 4 on ofwbus0=20 syscon_generic0: mem 0xd000-0xdfff on simplebus1=20 syscon_generic1: mem 0x11500-0x1153f on simplebus1=20 uart0: mem 0x12000-0x121ff irq 9,10,11 on=20 BQ_END simplebus1=20 BQ_BEGIN uart0: console (115200,n,8,1)=20 gpio0: mem=20 BQ_END 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 on= =20 simple_mfd0=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 syscon_generic2: mem 0x14000-0x1405f on simplebus1=20 gpio0: mem=20 BQ_END 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1=20 BQ_BEGIN gpio0: cannot allocate memory window=20 device_attach: gpio0 attach returned 6=20 mvneta0: mem 0x30000-0x33fff irq 14 on simplebus1=20 mvneta0: version is 10=20 mvneta0: Ethernet address: 00:a6:39:ca:e8:00=20 mdio0: on mvneta0=20 mdioproxy0: on mdio0=20 e6000sw0: on mdio0=20 e6000sw0: multi-chip addressing mode (0x1)=20 e6000sw0: CPU port at 0=20 e6000sw0: fixed port at 0=20 e6000sw0: PHY at port 1=20 miibus0: on e6000sw0=20 e1000phy0: PHY 17 on miibus0=20 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,=20 BQ_END 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto=20 BQ_BEGIN e6000sw0: PHY at port 2=20 miibus1: on e6000sw0=20 e1000phy1: PHY 18 on miibus1=20 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,=20 BQ_END 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto=20 BQ_BEGIN e6000sw0: PHY at port 3=20 miibus2: on e6000sw0=20 e1000phy2: PHY 19 on miibus2=20 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,=20 BQ_END 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto=20 BQ_BEGIN e6000sw0: switch is ready.=20 etherswitch0: on e6000sw0=20 xhci0: mem 0x58000-0x5bfff irq 16 on=20 BQ_END simplebus1=20 BQ_BEGIN xhci0: 32 bytes context size, 32-bit DMA=20 usbus0 on xhci0=20 syscon_generic3: mem 0x5d800-0x5dfff on simplebus1=20 ehci0: mem 0x5e000-0x5efff irq=20 BQ_END 17 on simplebus1=20 BQ_BEGIN usbus1: EHCI version 1.0=20 usbus1 on ehci0=20 syscon_generic4: mem 0x5f800-0x5ffff on simplebus1=20 sdhci_xenon0: mem=20 BQ_END 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1=20 BQ_BEGIN ahci0: mem 0xe0000-0xe0177 irq 26 on simplebus1=20 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS=20 ahcich0: at channel 0 on ahci0=20 device_attach: ahcich0 attach returned 6=20 gpioregulator0: on ofwbus0=20 gpioregulator0: cannot get pin 0=20 gpioregulator0: cannot parse parameters=20 device_attach: gpioregulator0 attach returned 6=20 cryptosoft0: =20 Timecounters tick every 1.000 msec=20 mvneta0: link state changed to UP=20 e6000sw0port1: link state changed to DOWN=20 e6000sw0port2: link state changed to DOWN=20 e6000sw0port3: link state changed to DOWN=20 usbus0: 5.0Gbps Super Speed USB v3.0=20 usbus1: 480Mbps High Speed USB v2.0=20 Release APs...done=20 CPU 0: ARM Cortex-A53 r0p4 affinity: 0=20 Instruction Set Attributes 0 =3D =20 Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...=20 Instruction Set Attributes 1 =3D <>=20 Root mount waiting for: Processor Features 0 =3D=20 BQ_END =20 BQ_BEGIN usbus1 Processor Features 1 =3D <0>=20 usbus0 Memory Model Features 0 =3D <4k Granule,64k Granule,S/NS=20 BQ_END Mem,MixedEndian,16bit ASID,1TB PA>=20 BQ_BEGIN Memory Model Features 1 =3D <>=20 Memory Model Features 2 =3D <32b CCIDX,48b VA>=20 Debug Features 0 =3D <2 CTX Breakpoints,4 Watchpoints,6=20 BQ_END Breakpoints,PMUv3,Debug v8>=20 BQ_BEGIN Debug Features 1 =3D <0>=20 Auxiliary Features 0 =3D <0>=20 Auxiliary Features 1 =3D <0>=20 CPU 1: ARM Cortex-A53 r0p4 affinity: 1=20 WARNING: WITNESS option enabled, expect reduced performance.=20 ugen0.1: at usbus0=20 ugen1.1: at usbus1=20 uhub0 on usbus0=20 uhub1 on usbus1=20 uhub0: on=20 BQ_END usbus0=20 BQ_BEGIN uhub1: on=20 BQ_END usbus1=20 BQ_BEGIN uhub0: 2 ports with 2 removable, self powered=20 uhub1: 1 port with 1 removable, self powered=20 mountroot: waiting for device /dev/ufs/FreeBSD_Install...=20 Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.=20 Loader variables:=20 vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install=20 vfs.root.mountfrom.options=3Dro,noatime=20 Manual root filesystem specification:=20 : [options]=20 Mount using filesystem =20 and with the specified (optional) option list.=20 eg. ufs:/dev/da0s1a=20 zfs:zroot/ROOT/default=20 cd9660:/dev/cd0 ro=20 (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)=20 ? List valid disk boot devices=20 . Yield 1 second (for background tasks)=20 Abort manual input=20 mountroot> ?=20 List of GEOM managed disk devices:=20 mountroot>=20 BQ_END _______________________________________________=20 [ mailto:freebsd-arm@freebsd.org | freebsd-arm@freebsd.org ] mailing list= =20 [ https://lists.freebsd.org/mailman/listinfo/freebsd-arm | https://lists.fr= eebsd.org/mailman/listinfo/freebsd-arm ]=20 To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"=20 BQ_END _______________________________________________=20 [ mailto:freebsd-arm@freebsd.org | freebsd-arm@freebsd.org ] mailing list= =20 [ https://lists.freebsd.org/mailman/listinfo/freebsd-arm | https://lists.fr= eebsd.org/mailman/listinfo/freebsd-arm ]=20 To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"=20 BQ_END