Date: Fri, 28 Mar 2008 12:34:39 +0100 From: "Ashant Chalasani" <sys@sellerbay.org> To: freebsd-questions@freebsd.org Subject: Re: tinybsd doesn't have /etc/rc.d/ ? Message-ID: <6a5b467e0803280434y571fa95exec22778fab0fbd82@mail.gmail.com> In-Reply-To: <6a5b467e0803270601h5590da83w76e159d9c445bbc4@mail.gmail.com> References: <6a5b467e0803270601h5590da83w76e159d9c445bbc4@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Still no go on getting sshd to start. A few things have gotten better though..
Both /etc/rc and /etc/defaults/rc.conf were missing. Copying these
from host to tinybsd_ap helped.
init right now looks like:
--------------------------------------
Timecounters tick every 1.000 msec
Elan-mmcr driver: MMCR at 0xc5ad7000. PPS support.
Elan-mmcr Soekris net45xx comBIOS ver. 1.23a 20040211 Copyright (C) 2000-2003
ipfw2 initialized, divert enabled, rule-based forwarding disabled,
default to accept, logging disabled
ad0: 124MB <ZOOMCF 128MB CF040520> at ata0-master PIO4
Trying to mount root from ufs:/dev/ad0a
WARNING: /mnt was not properly dismounted
Invalid time in clock: check and reset the date!
Loading configuration files.
WARNING: / was not properly dismounted
mtree: line 6: unknown group wheel
cp: /var/log/lastlog: No such file or directory
chmod: /var/log/lastlog: No such file or directory
cp: /var/log/wtmp: No such file or directory
chmod: /var/log/wtmp: No such file or directory
eval: cannot create /var/run/dmesg.boot: No such file or directory
eval: cannot create /var/run/syslogd.sockets: No such file or directory
Starting syslogd.
syslogd: cannot open pid file: No such file or directory
Mar 28 08:52:31 syslogd: cannot create /var/run/log: No such file or directory
syslogd: child pid 83 exited with return code 1
Flushed all rules.
00100 allow ip from any to any via lo0
00200 deny ip from any to 127.0.0.0/8
00300 deny ip from 127.0.0.0/8 to any
Firewall rules loaded.
net.inet.ip.fw.enable: 1 -> 1
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet 127.0.0.1 netmask 0xff000000
Additional routing options:.
Additional IP options:.
Starting sshd.
Missing privilege separation directory: /var/empty
bridge0: Ethernet address: ca:03:78:21:3c:50
bridge0
ath0: promiscuous mode enabled
sis0: promiscuous mode enabled
Starting cron.
cron: can't open or create /var/run/cron.pid: No such file or directory
Fri M1sis0: Applying short cable fix (reg=f5)
sis0: link state changed to UP
-------------------------------------------------
/var/log/ and /var/run/ directory contents are:
[root@fbsd70 /var/log]# l
total 4
drwxr-xr-x 24 root 0 512 Mar 25 19:37 ..
-rw-r--r-- 1 root 0 0 Mar 27 14:00 lastlog
-rw-r--r-- 1 root 0 0 Mar 27 14:00 wtmp
drwxr-xr-x 2 root 0 512 Mar 27 14:01 .
[root@fbsd70 /var/run]# l
total 20
drwxr-xr-x 2 bind 53 512 Mar 25 17:02 named
drwxrwx--- 2 root 69 512 Mar 25 17:02 ppp
drwxr-xr-x 24 root 0 512 Mar 25 19:37 ..
-rw-r--r-- 1 root 0 0 Mar 28 09:36 utmp
-rw-r--r-- 1 root 0 0 Mar 28 09:36 syslogd.sockets
-rw-r--r-- 1 root 0 8879 Mar 28 09:36 dmesg.boot
-rw-r--r-- 1 root 0 0 Mar 28 09:36 clean_var
drwxr-xr-x 4 root 0 512 Mar 28 09:36 .
-rw------- 1 root 0 4 Mar 28 09:36 cron.pid
Can anyone see why the /var/log and /var/run errors are occuring
inspite of files existing and writable?
Thanks
Ashant
On Thu, Mar 27, 2008 at 2:01 PM, Ashant Chalasani <sys@sellerbay.org> wrote:
> The whole of /etc/rc.d/ directory is missing on TinyBSD 0.9. Is this
> by design? I'm hoping someone can throw light on it.
>
> I copied the sshd script manually from my 7.0-REL host onto the flash
> image, as also a simple initialization script that I wrote for setting
> up the network. But it looks like lot more startup scripts from
> /etc/rc.d/ are required to initialize the system. I can ping the
> device on the network port, which means my network script ran. But
> sshd on port 22 isn't available, so I guess /etc/rc.d/sshd failed.
>
> I prefer to copy only the necessary scripts into my target's
> /etc/rc.d/ from the host, and not the whole directory. There are 143
> scripts in rc.d. Is there a minimal subset of scripts to setup the
> system, networking + basic services (dhclient, sshd etc)?
>
> Thanks
> Ashant
>
> --
> http://code.google.com/p/tinybsdap/
>
--
http://code.google.com/p/tinybsdap/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6a5b467e0803280434y571fa95exec22778fab0fbd82>