Date: Tue, 01 Feb 2011 17:53:53 -0500 From: Colin Legendre <clegendre@zeropenalty.com> To: freebsd-questions@freebsd.org Subject: Issues with ar0(Host Raid) adaptec after upgrade to 8.2 Message-ID: <4D488F01.6030800@zeropenalty.com>
next in thread | raw e-mail | index | archive | help
Hey All, I'm having an odd issue, and the only thing I can imagine is that there has been a major change between 8.1 and 8.2. Using the 8.1 kernel everything is dandy. But when I try to use a newly compiled kernel from 8.2(GENERIC) I have no luck. Root will not mount. Here are relevant kernel messages under 8.1... FreeBSD 8.1-RELEASE-p2 #2: Mon Jan 31 19:25:14 EST 2011 atapci2: <Intel ICH7 SATA300 controller> port 0x30d8-0x30df,0x30cc-0x30cf,0x30d0-0x30d7,0x30c8-0x30cb,0x3060-0x307f mem 0xc0000400-0xc00007ff irq 19 at device 31.2 on pci0 atapci2: [ITHREAD] atapci2: AHCI called from vendor specific driver atapci2: AHCI v1.10 controller with 4 3Gbps ports, PM not supported ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 2> on atapci2 ata5: [ITHREAD] ad8: 286168MB <Seagate ST3300622AS 3.AAH> at ata4-master UDMA100 SATA 3Gb/s ad10: 286168MB <Seagate ST3300622AS 3.AAH> at ata5-master UDMA100 SATA 3Gb/s ar0: 286168MB <Intel MatrixRAID RAID1> status: READY ar0: disk0 READY (master) using ad8 at ata4-master ar0: disk1 READY (mirror) using ad10 at ata5-master GEOM: ad8s1: geometry does not match label (255h,63s != 16h,63s). GEOM: ad10s1: geometry does not match label (255h,63s != 16h,63s). GEOM: ufsid/4bb50de139c19cf4: geometry does not match label (255h,63s != 16h,63s). Trying to mount root from ufs:/dev/ar0s1a WARNING: ufsid/47f409368a08243c expected rawoffset 0, found 63 WARNING: ufsid/4bb50de139c19cf4 expected rawoffset 0, found 63 WARNING: ar0s1a expected rawoffset 0, found 63 WARNING: ad10s1a expected rawoffset 0, found 63 WARNING: ad8s1a expected rawoffset 0, found 63 WARNING: ar0s1 expected rawoffset 0, found 63 WARNING: ad10s1 expected rawoffset 0, found 63 WARNING: ad8s1 expected rawoffset 0, found 63 GEOM: ufsid/4bb50de139c19cf4c: geometry does not match label (255h,63s != 16h,63s). GEOM: ad10s1a: geometry does not match label (255h,63s != 16h,63s). GEOM: ad10s1c: geometry does not match label (255h,63s != 16h,63s). GEOM: ad8s1a: geometry does not match label (255h,63s != 16h,63s). GEOM: ad8s1c: geometry does not match label (255h,63s != 16h,63s). Under 8.2 I don't see... --->atapci2: AHCI called from vendor specific driver --->atapci2: AHCI v1.10 controller with 4 3Gbps ports, PM not supported at all, I don't see the drives, nothing It drops to the 'mountroot' prompt and when I do ? the only drive I see is the cd drive. If I boot back with to 'kernel.old' which is 8.1 Release I have no issues. Any ideas?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D488F01.6030800>