From owner-freebsd-alpha@FreeBSD.ORG Mon Feb 14 23:23:04 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 77A9F16A4CF for ; Mon, 14 Feb 2005 23:23:04 +0000 (GMT) Received: from smtp1.sea.theriver.com (smtp1.sea.theriver.com [216.39.128.16]) by mx1.FreeBSD.org (Postfix) with SMTP id AEE1843D3F for ; Mon, 14 Feb 2005 23:23:03 +0000 (GMT) (envelope-from tponsford@theriver.com) Received: (qmail 12400 invoked from network); 14 Feb 2005 23:23:00 -0000 Received: from 207-207-75-7.ip.theriver.com (HELO theriver.com) (tponsford@207.207.75.7) by 216.39.128.7 with SMTP; Mon, 14 Feb 2005 23:23:00 +0000 Message-ID: <420E3483.8090609@theriver.com> Date: Sat, 12 Feb 2005 09:53:23 -0700 From: Tom Ponsford User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7b) Gecko/20040429 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-alpha@freebsd.org Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: kernel panic on AS100A X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 14 Feb 2005 23:23:04 -0000 Hi All, I picked up a AS 1000A a few weeks ago. It has an EV5 300mhz cpu, 64MB mem, and 3 disks attached to a KZPSC raid controller ( a DAC960), , which is supported by freebsd. When I first attempted to install freebsd in place of windows NT which was on it, I upgraded the SRM firmware to the latest available, but got error messages on bootup telling me to upgrade the firmware on the KZPSC from it v 2.36. The install program continued to the setup menu but could not find any disks attached to the raid controller. I upgraded to v2.70 on the raid controller and the dmesg readout did not show any error messages, BUT the machine get a kernel panic after mounting the mfsroot complaining about a memory management fault. below is the machine config, mem and dev config and boot messages. Is there a problem with the firmware revision and freebsd that I'm not aware of? Or is it just a case of pilot error and I forgot to do something? Advice, or a swift kick in the rear with solution would be appreciated. Cheers Tom >>>show config Digital Equipment Corporation AlphaServer 1000 5/300 Firmware SRM Console: V5.4-104 ARC Console: v5.68 PALcode: VMS PALcode V1.20-3, OSF PALcode V1.22-5 Serial Rom: V1.0 Processor DECchip (tm) 21164-5 300MHz Memory 64 Meg of System Memory Bank 0 = 64 Mbytes(16 MB Per SIMM) Starting at 0x00000000 Bank 1 = No Memory Detected Bank 2 = No Memory Detected Bank 3 = No Memory Detected Slot Option Hose 0, Bus 0, PCI 6 NCR 53C810 pka0.7.0.6.0 SCSI Bus ID 7 dka400.4.0.6.0 RRD45 mka500.5.0.6.0 TLZ07 7 Intel 82375 Bridge to Bus 1, EISA 11 DECchip 21040-AA ewa0.0.0.11.0 00-00-F8-22-7E-37 12 Mylex DAC960 dra.0.0.12.0 dra0.0.0.12.0 1 Member JBOD dra1.0.0.12.0 1 Member JBOD dra2.0.0.12.0 1 Member JBOD Slot Option Hose 0, Bus 1, EISA 8 DBI0501 >>>show mem 64 Meg of System Memory Bank 0 = 64 Mbytes(16 MB Per SIMM) Starting at 0x00000000 Bank 1 = No Memory Detected Bank 2 = No Memory Detected Bank 3 = No Memory Detected >>>show dev dka400.4.0.6.0 DKA400 RRD45 0436 dra0.0.0.12.0 DRA0 1 Member JBOD dra1.0.0.12.0 DRA1 1 Member JBOD dra2.0.0.12.0 DRA2 1 Member JBOD dva0.0.0.1000.0 DVA0 mka500.5.0.6.0 MKA500 TLZ07 553B ewa0.0.0.11.0 EWA0 00-00-F8-22-7E-37 pka0.7.0.6.0 PKA0 SCSI Bus ID 7 >>>boot dka400 ff.fe.fd.fc.fb.fa.f9.f8.f7.f6.f5.f3.f2.f1.f0.ef.df.ee.f4. probing hose 0, PCI probing PCI-to-EISA bridge, bus 1 bus 0, slot 6 -- pka -- NCR 53C810 bus 0, slot 11 -- ewa -- DECchip 21040-AA bus 0, slot 12 -- dra -- Mylex DAC960 ed.ec. ** mouse error ** eb.....ea.e9.e8.e7.e6.e5.e4.e3.e2.e1.e0. V5.4-104, built on Mar 24 1999 at 14:00:39 Memory Testing and Configuration Status 64 Meg of System Memory Bank 0 = 64 Mbytes(16 MB Per SIMM) Starting at 0x00000000 Bank 1 = No Memory Detected Bank 2 = No Memory Detected Bank 3 = No Memory Detected Testing the System waiting for dra.0.0.12.0 to poll... waiting for dra.0.0.12.0 to poll... Testing the Disks (read only) Testing the Network Change mode to Internal loopback. Change to Normal Operating Mode. CPU 0 booting (boot dka400.4.0.6.0 -flags 0) block 0 of dka400.4.0.6.0 is a valid boot block reading 410 blocks from dka400.4.0.6.0 bootstrap code read in Building FRU table FRU table size = 0x8cf base = 1cc000, image_start = 0, image_bytes = 33400 initializing HWRPB at 2000 initializing page table at 3fd0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Console: SRM firmware console VMS PAL rev: 0x1000300010114 OSF PAL rev: 0x1000500020116 Switch to OSF PAL code succeeded FreeBSD/alpha SRM CD9660 boot, Revision 1.2 (root@ds10.wbnet, Fri Nov 5 04:07:45 UTC 2004) Memory: 65536 k Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel] in 8 seconds... Booting [/boot/kernel/kernel]... Entering /boot/kernel/kernel at 0xfffffc0000344c30... Unrecognized boot flag '0'. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Fri Nov 5 11:30:09 UTC 2004 root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC AlphaServer 1000/1000A AlphaServer 1000 5/300, 300MHz 8192 byte page size, 1 processor. CPU: EV5 (21164) major=5 minor=5 OSF PAL rev: 0x1000500020116 real memory = 65019904 (62 MB) avail memory = 49741824 (47 MB) cia0: <2117x Core Logic chipset> cia0: ALCOR/ALCOR2, pass 3 cia0: extended capabilities: 20 pcib0: <2117x PCI host bus adapter> on cia0 pci0: on pcib0 sym0: <810> port 0x10000-0x100ff mem 0x81008000-0x810080ff irq 12 at device 6.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: interrupting at CIA irq 12 sym0: [GIANT-LOCKED] eisab0: at device 7.0 on pci0 eisa0: on eisab0 mainboard0: on eisa0 slot 0 isa0: on eisab0 de0: port 0x10100-0x1017f mem 0x81008100-0x8100817f irq 0 at device 11.0 on pci0 de0: interrupting at CIA irq 0 de0: [GIANT-LOCKED] de0: DEC 21040 [10Mb/s] pass 2.4 de0: Ethernet address: 00:00:f8:22:7e:37 de0: if_start running deferred for Giant mlx0: port 0x10180-0x101ff mem 0x81008180-0x810081ff irq 4 at device 12.0 on pci0 mlx0: interrupting at CIA irq 4 mlx0: [GIANT-LOCKED] mlx0: DAC960P/PD, 3 channels, firmware 2.70-0-00, 4MB RAM mlxd0: on mlx0 mlxd0: 2007MB (4110336 sectors) RAID 7 (online) mlxd1: on mlx0 mlxd1: 4091MB (8378368 sectors) RAID 7 (online) mlxd2: on mlx0 mlxd2: 8678MB (17772544 sectors) RAID 7 (online) orm0: at iomem 0xc0000-0xc7fff on isa0 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata0: interrupting at ISA irq 14 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 ata1: interrupting at ISA irq 15 atkbdc0: at port 0x64,0x60 on isa0 atkbd0: irq 1 on atkbdc0 atkbd0: interrupting at ISA irq 1 atkbd0: [GIANT-LOCKED] fdc0: at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 mcclock0: at port 0x70-0x71 on isa0 ppc0: at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Polled port ppi0: on ppbus0 ppc0: interrupting at ISA irq 7 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Timecounter "alpha" frequency 300001026 Hz quality 0 Timecounters tick every 0.976 msec Waiting 15 seconds for SCSI devices to settle md0: Preloaded image 4423680 bytes at 0xfffffc00009ba570 fatal kernel trap: trap entry = 0x2 (memory management fault) cpuid = 0 faulting va = 0x0 type = access violation cause = store instruction pc = 0xfffffc00006fa244 ra = 0xfffffc0000716144 sp = 0xfffffe00056f5b50 curthread = 0xfffffc0003db33b0 pid = 7, comm = fdc0 panic: trap cpuid = 0 Uptime: 3s Cannot dump. No dump device defined. Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. -- --- Please do not read this sig. If you have read this far, please unread back to the beginning.