Date: Sat, 12 Feb 2005 09:53:23 -0700 From: Tom Ponsford <tponsford@theriver.com> To: freebsd-alpha@freebsd.org Subject: kernel panic on AS100A Message-ID: <420E3483.8090609@theriver.com>
next in thread | raw e-mail | index | archive | help
Hi All,
I picked up a AS 1000A a few weeks ago. It has an EV5 300mhz cpu, 64MB mem,
and 3 disks attached to a KZPSC raid controller ( a DAC960), , which is
supported by freebsd.
When I first attempted to install freebsd in place of windows NT which was on
it, I upgraded the SRM firmware to the latest available, but got error
messages on bootup telling me to upgrade the firmware on the KZPSC from it v
2.36. The install program continued to the setup menu but could not find any
disks attached to the raid controller.
I upgraded to v2.70 on the raid controller and the dmesg readout did not show
any error messages, BUT the machine get a kernel panic after mounting the
mfsroot complaining about a memory management fault.
below is the machine config, mem and dev config and boot messages.
Is there a problem with the firmware revision and freebsd that I'm not aware
of? Or is it just a case of pilot error and I forgot to do something?
Advice, or a swift kick in the rear with solution would be appreciated.
Cheers
Tom
>>>show config
Digital Equipment Corporation
AlphaServer 1000 5/300
Firmware
SRM Console: V5.4-104
ARC Console: v5.68
PALcode: VMS PALcode V1.20-3, OSF PALcode V1.22-5
Serial Rom: V1.0
Processor
DECchip (tm) 21164-5 300MHz
Memory
64 Meg of System Memory
Bank 0 = 64 Mbytes(16 MB Per SIMM) Starting at 0x00000000
Bank 1 = No Memory Detected
Bank 2 = No Memory Detected
Bank 3 = No Memory Detected
Slot Option Hose 0, Bus 0, PCI
6 NCR 53C810 pka0.7.0.6.0 SCSI Bus ID 7
dka400.4.0.6.0 RRD45
mka500.5.0.6.0 TLZ07
7 Intel 82375 Bridge to Bus 1, EISA
11 DECchip 21040-AA ewa0.0.0.11.0 00-00-F8-22-7E-37
12 Mylex DAC960 dra.0.0.12.0
dra0.0.0.12.0 1 Member JBOD
dra1.0.0.12.0 1 Member JBOD
dra2.0.0.12.0 1 Member JBOD
Slot Option Hose 0, Bus 1, EISA
8 DBI0501
>>>show mem
64 Meg of System Memory
Bank 0 = 64 Mbytes(16 MB Per SIMM) Starting at 0x00000000
Bank 1 = No Memory Detected
Bank 2 = No Memory Detected
Bank 3 = No Memory Detected
>>>show dev
dka400.4.0.6.0 DKA400 RRD45 0436
dra0.0.0.12.0 DRA0 1 Member JBOD
dra1.0.0.12.0 DRA1 1 Member JBOD
dra2.0.0.12.0 DRA2 1 Member JBOD
dva0.0.0.1000.0 DVA0
mka500.5.0.6.0 MKA500 TLZ07 553B
ewa0.0.0.11.0 EWA0 00-00-F8-22-7E-37
pka0.7.0.6.0 PKA0 SCSI Bus ID 7
>>>boot dka400
ff.fe.fd.fc.fb.fa.f9.f8.f7.f6.f5.f3.f2.f1.f0.ef.df.ee.f4.
probing hose 0, PCI
probing PCI-to-EISA bridge, bus 1
bus 0, slot 6 -- pka -- NCR 53C810
bus 0, slot 11 -- ewa -- DECchip 21040-AA
bus 0, slot 12 -- dra -- Mylex DAC960
ed.ec.
** mouse error **
eb.....ea.e9.e8.e7.e6.e5.e4.e3.e2.e1.e0.
V5.4-104, built on Mar 24 1999 at 14:00:39
Memory Testing and Configuration Status
64 Meg of System Memory
Bank 0 = 64 Mbytes(16 MB Per SIMM) Starting at 0x00000000
Bank 1 = No Memory Detected
Bank 2 = No Memory Detected
Bank 3 = No Memory Detected
Testing the System
waiting for dra.0.0.12.0 to poll...
waiting for dra.0.0.12.0 to poll...
Testing the Disks (read only)
Testing the Network
Change mode to Internal loopback.
Change to Normal Operating Mode.
CPU 0 booting
(boot dka400.4.0.6.0 -flags 0)
block 0 of dka400.4.0.6.0 is a valid boot block
reading 410 blocks from dka400.4.0.6.0
bootstrap code read in
Building FRU table
FRU table size = 0x8cf
base = 1cc000, image_start = 0, image_bytes = 33400
initializing HWRPB at 2000
initializing page table at 3fd0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x1000300010114
OSF PAL rev: 0x1000500020116
Switch to OSF PAL code succeeded
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@ds10.wbnet, Fri Nov 5 04:07:45 UTC 2004)
Memory: 65536 k
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...
Booting [/boot/kernel/kernel] in 8 seconds...
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc0000344c30...
Unrecognized boot flag '0'.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 11:30:09 UTC 2004
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
AlphaServer 1000/1000A
AlphaServer 1000 5/300, 300MHz
8192 byte page size, 1 processor.
CPU: EV5 (21164) major=5 minor=5
OSF PAL rev: 0x1000500020116
real memory = 65019904 (62 MB)
avail memory = 49741824 (47 MB)
cia0: <2117x Core Logic chipset>
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 20<DWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
sym0: <810> port 0x10000-0x100ff mem 0x81008000-0x810080ff irq 12 at device
6.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at CIA irq 12
sym0: [GIANT-LOCKED]
eisab0: <PCI-EISA bridge> at device 7.0 on pci0
eisa0: <EISA bus> on eisab0
mainboard0: <DEC5000 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on eisab0
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x81008100-0x8100817f
irq 0 at device 11.0 on pci0
de0: interrupting at CIA irq 0
de0: [GIANT-LOCKED]
de0: DEC 21040 [10Mb/s] pass 2.4
de0: Ethernet address: 00:00:f8:22:7e:37
de0: if_start running deferred for Giant
mlx0: <Mylex version 2 RAID interface> port 0x10180-0x101ff mem
0x81008180-0x810081ff irq 4 at device 12.0 on pci0
mlx0: interrupting at CIA irq 4
mlx0: [GIANT-LOCKED]
mlx0: DAC960P/PD, 3 channels, firmware 2.70-0-00, 4MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 2007MB (4110336 sectors) RAID 7 (online)
mlxd1: <Mylex System Drive> on mlx0
mlxd1: 4091MB (8378368 sectors) RAID 7 (online)
mlxd2: <Mylex System Drive> on mlx0
mlxd2: 8678MB (17772544 sectors) RAID 7 (online)
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata0: interrupting at ISA irq 14
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
ata1: interrupting at ISA irq 15
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 300001026 Hz quality 0
Timecounters tick every 0.976 msec
Waiting 15 seconds for SCSI devices to settle
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009ba570
fatal kernel trap:
trap entry = 0x2 (memory management fault)
cpuid = 0
faulting va = 0x0
type = access violation
cause = store instruction
pc = 0xfffffc00006fa244
ra = 0xfffffc0000716144
sp = 0xfffffe00056f5b50
curthread = 0xfffffc0003db33b0
pid = 7, comm = fdc0
panic: trap
cpuid = 0
Uptime: 3s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
--
---
Please do not read this sig. If you have read this far, please unread back to
the beginning.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?420E3483.8090609>