Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 18 Feb 2012 17:55:58 -0200
From:      H <hm@hm.net.br>
To:        Ronald Klop <ronald-freebsd8@klop.yi.org>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: disk access seems unitask and ant-slow
Message-ID:  <4F40024E.9010609@hm.net.br>
In-Reply-To: <op.v9vlr1zr8527sy@pinky>
References:  <4F215A99.8020003@os2.kiev.ua> <4F27C04F.7020400@omnilan.de> <4F27C7C7.3060807@os2.kiev.ua> <CAJ-VmomezUWrEgxxmUEOhWnmLDohMAWRpSXmTR=n2y_LuizKJg@mail.gmail.com> <4F37F81E.7070100@os2.kiev.ua> <CAJ-Vmok9Ph1sgFCy6kNT4XR14grTLvG9M3JvT9eVBRjgqD%2BY9g@mail.gmail.com> <4F38AF69.6010506@os2.kiev.ua> <20120213132821.GA78733@in-addr.com> <20120214200258.GA29641@server.vk2pj.dyndns.org> <4F3F8F0C.3000606@hm.net.br> <op.v9vlr1zr8527sy@pinky>

next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Ronald Klop wrote:
> On Sat, 18 Feb 2012 12:44:12 +0100, H <hm@hm.net.br> wrote:
> 
>> Hi
>> 
>> I have 9-Stable on one partition of my SATAII disk, with kde4, to
>> be sure I compiled yesterday sources world and kernel
>> 
>> happens that any secondary task with diskaccess is so very slow
>> that it is inacceptable
>> 
>> for example, compiling firefox and then trying to open an image
>> with gimp, I am sitting here for over 5 minutes and the open
>> image dialog still do not show the directory content ..., same
>> with dolphin or any other diskaccess
>> 
>> I have enough cpu and ram, I go back to 8.2 and everything runs
>> smooth and fast as usual, same on fedora10 partition
>> 
>> my disk is good and found as ada, no fault anywhere
>> 
>> system is almost sleeping CPU:  2.6% user,  0.0% nice,  3.6%
>> system,  1.3% interrupt, 92.5% idle
>> 
>> 
>> I would be glad to get any good hint how to change that
>> 
>> 
>> 
>> thank's
> 
> Please post the output of dmesg so people have some information
> about your system. And /etc/sysctl.conf, /boot/loader.conf and the
> output of 'mount -v' are interesting also.
> 
> Ronald.

thank's for your attention but it would not help and of course, first
thing I did was disabling all custom settings, I have no setting which
could influence disk access, it's a desktop ...

other then loading glabel,sem,tmpfs I do not have no any fancy
settings in loader.conf either


please don't start on the machine, it runs fine and is ok

well, for the piece what you asked for:



mount -v
/dev/label/root on / (ufs, local, journaled soft-updates)
devfs on /dev (devfs, local, multilabel)
/dev/label/var on /var (ufs, local, journaled soft-updates)
/dev/label/usr on /usr (ufs, local, journaled soft-updates)
procfs on /proc (procfs, local)
linprocfs on /compat/linux/proc (linprocfs, local)


dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #8: Fri Feb 17 07:00:02 BRST 2012
    hmm@pop1.hm.net.br:/usr/obj/usr/src/sys/WIPMINI i386
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2611.94-MHz
686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Family = f  Model = 4b
Stepping = 2

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
real memory  = 1073741824 (1024 MB)
avail memory = 1030991872 (983 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <042910 APIC1103>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <042910 XSDT1103> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, fed40000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x900-0x9ff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xdfcff000-0xdfcfffff
irq 21 at device 2.0 on pci0
usbus0: <nVidia nForce MCP61 USB Controller> on ohci0
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem
0xdfcfec00-0xdfcfecff irq 22 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1: <NVIDIA nForce MCP61 USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ath0: <Atheros 5413> mem 0xdfdf0000-0xdfdfffff irq 16 at device 6.0 on
pci1
ath0: AR5413 mac 10.5 RF5413 phy 6.1
hdac0: <NVidia MCP61 High Definition Audio Controller> mem
0xdfcf8000-0xdfcfbfff irq 23 at device 5.0 on pci0
atapci0: <nVidia nForce MCP61 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xc480-0xc487 mem
0xdfcfd000-0xdfcfdfff irq 20 at device 7.0 on pci0
miibus0: <MII bus> on nfe0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
nfe0: Ethernet address: 48:5b:39:af:5e:2b
atapci1: <nVidia nForce MCP61 SATA300 controller> port
0xc400-0xc407,0xc080-0xc083,0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb88f
mem 0xdfcfc000-0xdfcfcfff irq 21 at device 8.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem
0xc0000000-0xcfffffff,0xdfef0000-0xdfefffff irq 17 at device 0.0 on pci2
drm0: <Radeon HD 2400 Pro> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] Initialized radeon 1.31.0 20080613
hdac1: <ATI RV610 High Definition Audio Controller> mem
0xdfeec000-0xdfeeffff irq 18 at device 0.1 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xec00-0xec1f
mem 0xdffe0000-0xdfffffff,0xdffc0000-0xdffdffff irq 19 at device 0.0
on pci3
em0: Using an MSI interrupt
em0: Ethernet address: 00:1b:21:14:6c:05
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
acpi_button0: <Power Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
aibs0: <ASUSTeK AI Booster (ACPI ASOC ATK0110)> on acpi0
aibs0: V0: 0x06020000        Vcore Voltage   850 /  1600  0x1
aibs0: V1: 0x06020001         +3.3 Voltage  2970 /  3630  0x1
aibs0: V2: 0x06020002           +5 Voltage  4500 /  5500  0x1
aibs0: V3: 0x06020003          +12 Voltage 10200 / 13800  0x1
aibs0: T0: 0x06030000      CPU Temperature   600 /   950  0x10001
aibs0: T1: 0x06030001       MB Temperature   450 /   950  0x10001
aibs0: F0: 0x06040000        CPU FAN Speed   600 /  7200  0x10001
aibs0: F1: 0x06040001    CHASSIS FAN Speed   600 /  7200  0x10001
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 950
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x4 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding
enabled, default to deny, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
hdac0: HDA Codec #0: Realtek ALC662
pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC662 PCM #1 Analog> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: ATI R6xx HDMI
pcm2: <HDA ATI R6xx HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <ST3320418AS CC34> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 305244MB (625140335 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H44N RB00> Removable CD-ROM SCSI-0 device
cd0: 66.700MB/s transfers (UDMA4, SMP: AP CPU #1 Launched!
ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 scbus0 target 1 lun 0
cd1: <HL-DT-ST CD-RW GCE-8527B 1.02> Removable CD-ROM SCSI-0 device
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not
present - tray closed
uhub0: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <HP> at usbus1
umass0: <HP Photosmart C4400 series, class 0/0, rev 2.00/1.00, addr 2>
on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:4:0:-1: Attached to scbus4
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0
(Invalid command operation code)
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not
present)
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <HP Photosmart C4400 1.00> Removable Direct Access SCSI-5 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
Root mount waiting for: usbus1
Root mount waiting for: usbus1
ugen1.3: <Kingston> at usbus1
umass1: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.10, addr 3>
on usbus1
umass1:  SCSI over Bulk-Only; quirks = 0x4100
umass1:5:1:-1: Attached to scbus5
Trying to mount root from ufs:/dev/label/root [rw]...
da1 at umass-sim1 bus 1 scbus5 target 0 lun 0
da1: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI-0
device
da1: 40.000MB/s transfers
da1: 7640MB (15646720 512 byte sectors: 255H 63S/T 973C)
wlan0: Ethernet address: 00:19:5b:68:71:8a







- -- 
H
+55 (17)4141.2222
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (FreeBSD)

iEYEARECAAYFAk9AAk4ACgkQvKVfg5xjCDwq1gCfaAZ7oTAQc5m599JdyEXmOHxL
scwAnRovNHmbhuH0TqAbXXeOflHRYwN5
=J412
-----END PGP SIGNATURE-----



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F40024E.9010609>