Date: Fri, 30 Jun 2000 11:41:52 +1000 From: Danny <dannyh@idx.com.au> To: freebsd-questions@freebsd.org Subject: Fwd: HI again! Message-ID: <00063011421700.00315@dannyh.freebsd.org>
next in thread | raw e-mail | index | archive | help
---------- Forwarded Message ---------- Subject: HI again! Date: Thu, 29 Jun 2000 16:21:14 +0200 From: Konstantin Dobrev <bodliv@iozho.net> So you want the output here is: ---------------------------------------------------------------------------------------- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #31: Thu Jun 29 12:20:47 EEST 2000 root@:/usr/src/sys/compile/kernelD Timecounter "i8254" frequency 1193182 Hz CPU: Cyrix 6x86MX (187.40-MHz 686-class CPU) Origin = "CyrixInstead" Id = 0x600 Stepping = 0 DIR=0x0752 Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX> real memory = 62914560 (61440K bytes) config> pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x388 Invalid command or syntax. Type `?' for help. config> pnp 1 1 os disable Invalid command or syntax. Type `?' for help. config> pnp 1 2 os enable port0 0x530 port1 irq0 11 drq0 0 Invalid command or syntax. Type `?' for help. config> pnp 1 3 os disable Invalid command or syntax. Type `?' for help. config> quit avail memory = 58200064 (56836K bytes) Preloaded elf kernel "kernel" at 0xc02bc000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02bc09c. VESA: v2.0, 4096k memory, flags:0x4, mode table:0xc0274022 (1000022) VESA: SiS super VGA chip. npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 5591 ATA33 controller> port 0x4000-0x400f,0x8800c438-0x8800c43b,0x1236020-0x1236027,0x8040040-0x8040043,0x881a280-0x881a287 irq 0 at device 1.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <SiS 5597/98 SVGA controller> at 20.0 irq 0 fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port pcm2: <CMI8330> at port 0x530-0x537,0x388-0x38f irq 11 drq 0 on isa0 device_probe_and_attach: pcm2 attach returned 6 unknown0: <CMI8330. Audio Adapter> at port 0x330-0x331 irq 9 on isa0 unknown1: <CMI8330. Audio Adapter> at port 0x200-0x207 on isa0 unknown2: <CMI8330. Audio Adapter> at port 0x220-0x22f irq 5 drq 1,5 on isa0 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 8063MB <QUANTUM FIREBALLlct08 08> [16383/16/63] at ata0-master using UDMA33 acd0: CDROM <CD-524EA-B> at ata1-master using WDMA2 Mounting root from ufs:/dev/ad0s3a I have some ideas how to work around of this problem but i chose to solve with others of group. I try to configure pnp device manualibut i didn't see it in device list(Funny). No meter i will recompile the ad1816(Who i use Under Linux(Slackware)). What do you think??? Regards. -- ---------------------------------------------------------------- You are not authorized to use my email address for any purpose. This is a violation of my privacy. Remove my email address from your databases immediately. ---------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00063011421700.00315>