Date: Fri, 04 Apr 2003 11:08:24 +0900 From: Rob Lahaye <lahaye@users.sourceforge.net> To: freebsd-questions@FreeBSD.ORG Subject: Long wait for harddisk detection during kernel boot Message-ID: <3E8CE918.2050409@users.sourceforge.net>
next in thread | raw e-mail | index | archive | help
Hi, I'm using 4.7 Release. When the kernel boots, I get a relatively long wait (a minute or more) at the harddisk detection. The HD is a IBM-DTLA/30.7Gb; CPU is Intel 1.7 GHz. For the whole 'dmesg' output, see below in the PS; the place where the wait occurs is here: [...] atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 [ HERE is the long wait! ] ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 11 at device 31.2 on pci0 [...] Any ideas why the kernel boot is not going smooth at that point? Thanks! Rob. PS: the complete boot log is: avail memory = 518733824 (506576K bytes) Preloaded elf kernel "kernel" at 0xc03f1000. Preloaded mfs_root "/mfsroot" at 0xc03f1084. Pentium Pro MTRR support enabled md0: Preloaded image </mfsroot> 4096 bytes at 0xc03ee354 md1: Malloc disk Using $PIR table, 12 entries at 0xc00f1600 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82845 Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 pci2: <S3 ViRGE DX/GX graphics accelerator> at 10.0 irq 12 rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xef800000-0xef8000ff irq 10 at device 12.0 on pci2 rl0: Ethernet address: 00:a0:b0:0e:3a:95 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 11 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 5 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E8CE918.2050409>