Date: Tue, 17 May 2016 12:52:31 +0000 (UTC) From: Eitan Adler <eadler@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r300050 - in head: share/doc/usd/07.mail share/man/man9 sys/amd64/vmm/io sys/arm/allwinner sys/arm/freescale/imx sys/arm/include sys/cam sys/dev/bhnd sys/dev/bxe sys/dev/drm2/i915 sys/d... Message-ID: <201605171252.u4HCqVeM035419@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: eadler Date: Tue May 17 12:52:31 2016 New Revision: 300050 URL: https://svnweb.freebsd.org/changeset/base/300050 Log: Don't repeat the the word 'the' (one manual change to fix grammar) Confirmed With: db Approved by: secteam (not really, but this is a comment typo fix) Modified: head/share/doc/usd/07.mail/mail6.nr head/share/man/man9/BUS_GET_CPUS.9 head/sys/amd64/vmm/io/vhpet.c head/sys/arm/allwinner/a10_ahci.c head/sys/arm/freescale/imx/imx_sdhci.c head/sys/arm/include/asm.h head/sys/cam/cam_periph.c head/sys/dev/bhnd/bhnd.c head/sys/dev/bxe/ecore_hsi.h head/sys/dev/drm2/i915/intel_crt.c head/sys/dev/drm2/i915/intel_display.c head/sys/dev/drm2/radeon/atombios.h head/sys/dev/drm2/radeon/r300_reg.h head/sys/dev/drm2/radeon/radeon_device.c head/sys/dev/drm2/radeon/radeon_fence.c head/sys/dev/drm2/radeon/radeon_gart.c head/sys/dev/e1000/e1000_82575.c head/sys/dev/e1000/e1000_ich8lan.c head/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c head/sys/dev/iwm/if_iwmreg.h head/sys/dev/netmap/netmap.c head/sys/dev/ow/ow.c head/sys/dev/pms/RefTisa/sallsdk/spc/mpi.c head/sys/dev/pms/RefTisa/sat/src/smsat.c head/sys/dev/pms/RefTisa/tisa/sassata/sata/host/sat.c head/sys/dev/random/fortuna.c head/sys/dev/sfxge/common/ef10_ev.c head/sys/mips/conf/DIR-825C1.hints head/sys/net/altq/altq_cbq.c head/sys/ofed/drivers/infiniband/debug/memtrack.c head/sys/ofed/drivers/infiniband/debug/memtrack.h head/sys/ofed/drivers/net/mlx4/main.c head/sys/xen/interface/io/blkif.h head/usr.bin/numactl/numactl.1 head/usr.sbin/bsdconfig/share/dialog.subr head/usr.sbin/pciconf/pciconf.8 Modified: head/share/doc/usd/07.mail/mail6.nr ============================================================================== --- head/share/doc/usd/07.mail/mail6.nr Tue May 17 12:48:30 2016 (r300049) +++ head/share/doc/usd/07.mail/mail6.nr Tue May 17 12:52:31 2016 (r300050) @@ -75,7 +75,7 @@ is a shorthand way of doing Use the .b \-v flag when invoking sendmail. This feature may also be enabled -by setting the the option "verbose". +by setting the option "verbose". .pp The following command line flags are also recognized, but are intended for use by programs invoking Modified: head/share/man/man9/BUS_GET_CPUS.9 ============================================================================== --- head/share/man/man9/BUS_GET_CPUS.9 Tue May 17 12:48:30 2016 (r300049) +++ head/share/man/man9/BUS_GET_CPUS.9 Tue May 17 12:52:31 2016 (r300050) @@ -62,7 +62,7 @@ argument specifies the size in bytes of .Fa cpuset . .Pp .Fn BUS_GET_CPUS -supports querying different types of CPU sets via the the +supports querying different types of CPU sets via the .Fa op argument. Not all set types are supported for every device. If a set type is not supported, Modified: head/sys/amd64/vmm/io/vhpet.c ============================================================================== --- head/sys/amd64/vmm/io/vhpet.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/amd64/vmm/io/vhpet.c Tue May 17 12:52:31 2016 (r300050) @@ -163,7 +163,7 @@ vhpet_counter(struct vhpet *vhpet, sbint /* * The sbinuptime corresponding to the 'countbase' is * meaningless when the counter is disabled. Make sure - * that the the caller doesn't want to use it. + * that the caller doesn't want to use it. */ KASSERT(nowptr == NULL, ("vhpet_counter: nowptr must be NULL")); } Modified: head/sys/arm/allwinner/a10_ahci.c ============================================================================== --- head/sys/arm/allwinner/a10_ahci.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/arm/allwinner/a10_ahci.c Tue May 17 12:52:31 2016 (r300050) @@ -158,7 +158,7 @@ ahci_a10_phy_reset(device_t dev) struct ahci_controller *ctlr = device_get_softc(dev); /* - * Here start the the magic -- most of the comments are based + * Here starts the magic -- most of the comments are based * on guesswork, names of routines and printf error * messages. The code works, but it will do that even if the * comments are 100% BS. Modified: head/sys/arm/freescale/imx/imx_sdhci.c ============================================================================== --- head/sys/arm/freescale/imx/imx_sdhci.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/arm/freescale/imx/imx_sdhci.c Tue May 17 12:52:31 2016 (r300050) @@ -625,7 +625,7 @@ imx_sdhci_intr(void *arg) * out of the hardware now so that we can present it later when the DAT0 * line is released. * - * If we need to wait for the the DAT0 line to be released, we set up a + * If we need to wait for the DAT0 line to be released, we set up a * timeout point 250ms in the future. This number comes from the SD * spec, which allows a command to take that long. In the real world, * cards tend to take 10-20ms for a long-running command such as a write Modified: head/sys/arm/include/asm.h ============================================================================== --- head/sys/arm/include/asm.h Tue May 17 12:48:30 2016 (r300049) +++ head/sys/arm/include/asm.h Tue May 17 12:52:31 2016 (r300050) @@ -79,7 +79,7 @@ /* * EENTRY()/EEND() mark "extra" entry/exit points from a function. - * LEENTRY()/LEEND() are the the same for local symbols. + * LEENTRY()/LEEND() are the same for local symbols. * The unwind info cannot handle the concept of a nested function, or a function * with multiple .fnstart directives, but some of our assembler code is written * with multiple labels to allow entry at several points. The EENTRY() macro Modified: head/sys/cam/cam_periph.c ============================================================================== --- head/sys/cam/cam_periph.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/cam/cam_periph.c Tue May 17 12:52:31 2016 (r300050) @@ -844,7 +844,7 @@ cam_periph_mapmem(union ccb *ccb, struct } /* - * This keeps the the kernel stack of current thread from getting + * This keeps the kernel stack of current thread from getting * swapped. In low-memory situations where the kernel stack might * otherwise get swapped out, this holds it and allows the thread * to make progress and release the kernel mapped pages sooner. Modified: head/sys/dev/bhnd/bhnd.c ============================================================================== --- head/sys/dev/bhnd/bhnd.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/bhnd/bhnd.c Tue May 17 12:52:31 2016 (r300050) @@ -117,7 +117,7 @@ bhnd_generic_attach(device_t dev) /** * Default bhnd(4) bus driver implementation of DEVICE_DETACH(). * - * This implementation calls device_detach() for each of the the device's + * This implementation calls device_detach() for each of the device's * children, in reverse bhnd probe order, terminating if any call to * device_detach() fails. */ Modified: head/sys/dev/bxe/ecore_hsi.h ============================================================================== --- head/sys/dev/bxe/ecore_hsi.h Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/bxe/ecore_hsi.h Tue May 17 12:52:31 2016 (r300050) @@ -3709,9 +3709,9 @@ struct cstorm_toe_ag_context uint32_t snd_max /* The ACK sequence number received in the last completed DDP */; #if defined(__BIG_ENDIAN) uint16_t __agg_vars3 /* Various aggregative variables*/; - uint16_t __reserved67 /* A counter for the number of RQ WQEs with invalidate the the USTORM encountered */; + uint16_t __reserved67 /* A counter for the number of RQ WQEs with invalidate the USTORM encountered */; #elif defined(__LITTLE_ENDIAN) - uint16_t __reserved67 /* A counter for the number of RQ WQEs with invalidate the the USTORM encountered */; + uint16_t __reserved67 /* A counter for the number of RQ WQEs with invalidate the USTORM encountered */; uint16_t __agg_vars3 /* Various aggregative variables*/; #endif #if defined(__BIG_ENDIAN) Modified: head/sys/dev/drm2/i915/intel_crt.c ============================================================================== --- head/sys/dev/drm2/i915/intel_crt.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/drm2/i915/intel_crt.c Tue May 17 12:52:31 2016 (r300050) @@ -794,7 +794,7 @@ void intel_crt_init(struct drm_device *d dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS; /* - * TODO: find a proper way to discover whether we need to set the the + * TODO: find a proper way to discover whether we need to set the * polarity and link reversal bits or not, instead of relying on the * BIOS. */ Modified: head/sys/dev/drm2/i915/intel_display.c ============================================================================== --- head/sys/dev/drm2/i915/intel_display.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/drm2/i915/intel_display.c Tue May 17 12:52:31 2016 (r300050) @@ -7971,7 +7971,7 @@ bool intel_set_mode(struct drm_crtc *crt crtc->mode = *mode; /* Only after disabling all output pipelines that will be changed can we - * update the the output configuration. */ + * update the output configuration. */ intel_modeset_update_state(dev, prepare_pipes); if (dev_priv->display.modeset_global_resources) Modified: head/sys/dev/drm2/radeon/atombios.h ============================================================================== --- head/sys/dev/drm2/radeon/atombios.h Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/drm2/radeon/atombios.h Tue May 17 12:52:31 2016 (r300050) @@ -2734,8 +2734,8 @@ ucMaxNBVoltageHigh: Voltage regulato ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all. -usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all. -usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all. +usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all. +usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all. */ Modified: head/sys/dev/drm2/radeon/r300_reg.h ============================================================================== --- head/sys/dev/drm2/radeon/r300_reg.h Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/drm2/radeon/r300_reg.h Tue May 17 12:52:31 2016 (r300050) @@ -356,7 +356,7 @@ __FBSDID("$FreeBSD$"); # define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0 # define R300_PVS_CNTL_1_POS_END_SHIFT 10 # define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20 -/* Addresses are relative the the vertex program parameters area. */ +/* Addresses are relative the vertex program parameters area. */ #define R300_VAP_PVS_CNTL_2 0x22D4 # define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0 # define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16 Modified: head/sys/dev/drm2/radeon/radeon_device.c ============================================================================== --- head/sys/dev/drm2/radeon/radeon_device.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/drm2/radeon/radeon_device.c Tue May 17 12:52:31 2016 (r300050) @@ -191,7 +191,7 @@ void radeon_scratch_free(struct radeon_d /* * radeon_wb_*() - * Writeback is the the method by which the the GPU updates special pages + * Writeback is the method by which the GPU updates special pages * in memory with the status of certain GPU events (fences, ring pointers, * etc.). */ Modified: head/sys/dev/drm2/radeon/radeon_fence.c ============================================================================== --- head/sys/dev/drm2/radeon/radeon_fence.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/drm2/radeon/radeon_fence.c Tue May 17 12:52:31 2016 (r300050) @@ -45,7 +45,7 @@ __FBSDID("$FreeBSD$"); * for GPU/CPU synchronization. When the fence is written, * it is expected that all buffers associated with that fence * are no longer in use by the associated ring on the GPU and - * that the the relevant GPU caches have been flushed. Whether + * that the relevant GPU caches have been flushed. Whether * we use a scratch register or memory location depends on the asic * and whether writeback is enabled. */ Modified: head/sys/dev/drm2/radeon/radeon_gart.c ============================================================================== --- head/sys/dev/drm2/radeon/radeon_gart.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/drm2/radeon/radeon_gart.c Tue May 17 12:52:31 2016 (r300050) @@ -413,7 +413,7 @@ void radeon_gart_fini(struct radeon_devi * (uncached system pages). * Each VM has an ID associated with it and there is a page table * associated with each VMID. When execting a command buffer, - * the kernel tells the the ring what VMID to use for that command + * the kernel tells the ring what VMID to use for that command * buffer. VMIDs are allocated dynamically as commands are submitted. * The userspace drivers maintain their own address space and the kernel * sets up their pages tables accordingly when they submit their Modified: head/sys/dev/e1000/e1000_82575.c ============================================================================== --- head/sys/dev/e1000/e1000_82575.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/e1000/e1000_82575.c Tue May 17 12:52:31 2016 (r300050) @@ -2416,7 +2416,7 @@ out: * e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits * @hw: pointer to the HW structure * - * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on + * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on * the values found in the EEPROM. This addresses an issue in which these * bits are not restored from EEPROM after reset. **/ Modified: head/sys/dev/e1000/e1000_ich8lan.c ============================================================================== --- head/sys/dev/e1000/e1000_ich8lan.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/e1000/e1000_ich8lan.c Tue May 17 12:52:31 2016 (r300050) @@ -4904,7 +4904,7 @@ static s32 e1000_id_led_init_pchlan(stru * @hw: pointer to the HW structure * * ICH8 use the PCI Express bus, but does not contain a PCI Express Capability - * register, so the the bus width is hard coded. + * register, so the bus width is hard coded. **/ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) { Modified: head/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c ============================================================================== --- head/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c Tue May 17 12:52:31 2016 (r300050) @@ -304,7 +304,7 @@ MODULE_DEPEND(storvsc, vmbus, 1, 1, 1); * We address this issue by implementing a sequentially * consistent protocol: * - * 1. Channel callback is invoked while holding the the channel lock + * 1. Channel callback is invoked while holding the channel lock * and an unloading driver will reset the channel callback under * the protection of this channel lock. * Modified: head/sys/dev/iwm/if_iwmreg.h ============================================================================== --- head/sys/dev/iwm/if_iwmreg.h Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/iwm/if_iwmreg.h Tue May 17 12:52:31 2016 (r300050) @@ -3923,7 +3923,7 @@ enum iwm_tx_flags { * cleared. Combination of IWM_RATE_MCS_* * @sta_id: index of destination station in FW station table * @sec_ctl: security control, IWM_TX_CMD_SEC_* - * @initial_rate_index: index into the the rate table for initial TX attempt. + * @initial_rate_index: index into the rate table for initial TX attempt. * Applied if IWM_TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames. * @key: security key * @next_frame_flags: IWM_TX_CMD_SEC_* and IWM_TX_CMD_NEXT_FRAME_* @@ -4274,7 +4274,7 @@ struct iwm_beacon_notif { /** * enum iwm_dump_control - dump (flush) control flags - * @IWM_DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty + * @IWM_DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty * and the TFD queues are empty. */ enum iwm_dump_control { Modified: head/sys/dev/netmap/netmap.c ============================================================================== --- head/sys/dev/netmap/netmap.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/netmap/netmap.c Tue May 17 12:52:31 2016 (r300050) @@ -2700,7 +2700,7 @@ netmap_detach_common(struct netmap_adapt } /* Wrapper for the register callback provided hardware drivers. - * na->ifp == NULL means the the driver module has been + * na->ifp == NULL means the driver module has been * unloaded, so we cannot call into it. * Note that module unloading, in our patched linux drivers, * happens under NMG_LOCK and after having stopped all the Modified: head/sys/dev/ow/ow.c ============================================================================== --- head/sys/dev/ow/ow.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/ow/ow.c Tue May 17 12:52:31 2016 (r300050) @@ -343,7 +343,7 @@ again: * See AN397 section 5.II.C.3 for the algorithm (though a bit * poorly stated). The search command forces each device to * send ROM ID bits one at a time (first the bit, then the - * complement) the the master (us) sends back a bit. If the + * complement) the master (us) sends back a bit. If the * device's bit doesn't match what we send back, that device * stops sending bits back. So each time through we remember * where we made the last decision (always 0). If there's a Modified: head/sys/dev/pms/RefTisa/sallsdk/spc/mpi.c ============================================================================== --- head/sys/dev/pms/RefTisa/sallsdk/spc/mpi.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/pms/RefTisa/sallsdk/spc/mpi.c Tue May 17 12:52:31 2016 (r300050) @@ -806,7 +806,7 @@ mpiMsgConsume( * \param messagePtr1 Pointer to the returned message buffer to free * \param messagePtr2 Pointer to the returned message buffer to free if bc > 1 * - * Returns consumed and processed message to the the specified outbounf queue + * Returns consumed and processed message to the specified outbounf queue * * Return: * AGSA_RC_SUCCESS if the message has been returned succesfully Modified: head/sys/dev/pms/RefTisa/sat/src/smsat.c ============================================================================== --- head/sys/dev/pms/RefTisa/sat/src/smsat.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/pms/RefTisa/sat/src/smsat.c Tue May 17 12:52:31 2016 (r300050) @@ -10883,7 +10883,7 @@ smsatReadCapacity10( /* * Setting RETURNED LOGICAL BLOCK ADDRESS in READ CAPACITY(10) response data: * SBC-2 specifies that if the capacity exceeded the 4-byte RETURNED LOGICAL - * BLOCK ADDRESS in READ CAPACITY(10) parameter data, the the RETURNED LOGICAL + * BLOCK ADDRESS in READ CAPACITY(10) parameter data, the RETURNED LOGICAL * BLOCK ADDRESS should be set to 0xFFFFFFFF so the application client would * then issue a READ CAPACITY(16) command. */ Modified: head/sys/dev/pms/RefTisa/tisa/sassata/sata/host/sat.c ============================================================================== --- head/sys/dev/pms/RefTisa/tisa/sassata/sata/host/sat.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/pms/RefTisa/tisa/sassata/sata/host/sat.c Tue May 17 12:52:31 2016 (r300050) @@ -5975,7 +5975,7 @@ GLOBAL bit32 satReadCapacity10( /* * Setting RETURNED LOGICAL BLOCK ADDRESS in READ CAPACITY(10) response data: * SBC-2 specifies that if the capacity exceeded the 4-byte RETURNED LOGICAL - * BLOCK ADDRESS in READ CAPACITY(10) parameter data, the the RETURNED LOGICAL + * BLOCK ADDRESS in READ CAPACITY(10) parameter data, the RETURNED LOGICAL * BLOCK ADDRESS should be set to 0xFFFFFFFF so the application client would * then issue a READ CAPACITY(16) command. */ Modified: head/sys/dev/random/fortuna.c ============================================================================== --- head/sys/dev/random/fortuna.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/random/fortuna.c Tue May 17 12:52:31 2016 (r300050) @@ -234,7 +234,7 @@ random_fortuna_process_event(struct harv pl = event->he_destination % RANDOM_FORTUNA_NPOOLS; randomdev_hash_iterate(&fortuna_state.fs_pool[pl].fsp_hash, event, sizeof(*event)); /*- - * Don't wrap the length. Doing the the hard way so as not to wrap at MAXUINT. + * Don't wrap the length. Doing this the hard way so as not to wrap at MAXUINT. * This is a "saturating" add. * XXX: FIX!!: We don't actually need lengths for anything but fs_pool[0], * but it's been useful debugging to see them all. Modified: head/sys/dev/sfxge/common/ef10_ev.c ============================================================================== --- head/sys/dev/sfxge/common/ef10_ev.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/dev/sfxge/common/ef10_ev.c Tue May 17 12:52:31 2016 (r300050) @@ -547,7 +547,7 @@ ef10_ev_rx( flags |= EFX_PKT_PREFIX_LEN; } - /* Calculate the index of the the last descriptor consumed */ + /* Calculate the index of the last descriptor consumed */ last_used_id = (eersp->eers_rx_read_ptr - 1) & eersp->eers_rx_mask; /* Check for errors that invalidate checksum and L3/L4 fields */ Modified: head/sys/mips/conf/DIR-825C1.hints ============================================================================== --- head/sys/mips/conf/DIR-825C1.hints Tue May 17 12:48:30 2016 (r300049) +++ head/sys/mips/conf/DIR-825C1.hints Tue May 17 12:52:31 2016 (r300050) @@ -6,7 +6,7 @@ hint.argemdio.0.maddr=0x19000000 hint.argemdio.0.msize=0x1000 hint.argemdio.0.order=0 -# 0x1ffe0004 is the the "unit MAC". +# 0x1ffe0004 is the "unit MAC". # 0x1ffe0018 is the second "MAC". # Right now this doesn't have any option for more than one # "unit MACs", so: Modified: head/sys/net/altq/altq_cbq.c ============================================================================== --- head/sys/net/altq/altq_cbq.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/net/altq/altq_cbq.c Tue May 17 12:52:31 2016 (r300050) @@ -702,7 +702,7 @@ cbq_modify_class(acp) * * This function create a new traffic class in the CBQ class hierarchy of * given parameters. The class that created is either the root, default, - * or a new dynamic class. If CBQ is not initilaized, the the root class + * or a new dynamic class. If CBQ is not initilaized, the root class * will be created. */ static int Modified: head/sys/ofed/drivers/infiniband/debug/memtrack.c ============================================================================== --- head/sys/ofed/drivers/infiniband/debug/memtrack.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/ofed/drivers/infiniband/debug/memtrack.c Tue May 17 12:52:31 2016 (r300050) @@ -510,7 +510,7 @@ EXPORT_SYMBOL(is_non_trackable_free_func /* WA - In this function handles confirm - the the function name is + the function name is '__ib_umem_release' or 'ib_umem_get' In this case we won't track the memory there because the kernel Modified: head/sys/ofed/drivers/infiniband/debug/memtrack.h ============================================================================== --- head/sys/ofed/drivers/infiniband/debug/memtrack.h Tue May 17 12:48:30 2016 (r300049) +++ head/sys/ofed/drivers/infiniband/debug/memtrack.h Tue May 17 12:52:31 2016 (r300050) @@ -64,7 +64,7 @@ int is_non_trackable_alloc_func(const ch int is_non_trackable_free_func(const char *func_name); /* WA - In this function handles confirm - the the function name is + the function name is '__ib_umem_release' or 'ib_umem_get' In this case we won't track the memory there because the kernel Modified: head/sys/ofed/drivers/net/mlx4/main.c ============================================================================== --- head/sys/ofed/drivers/net/mlx4/main.c Tue May 17 12:48:30 2016 (r300049) +++ head/sys/ofed/drivers/net/mlx4/main.c Tue May 17 12:52:31 2016 (r300050) @@ -164,7 +164,7 @@ MODULE_PARM_DESC(fast_drop, int mlx4_enable_64b_cqe_eqe = 1; module_param_named(enable_64b_cqe_eqe, mlx4_enable_64b_cqe_eqe, int, 0644); MODULE_PARM_DESC(enable_64b_cqe_eqe, - "Enable 64 byte CQEs/EQEs when the the FW supports this if non-zero (default: 1)"); + "Enable 64 byte CQEs/EQEs when the FW supports this if non-zero (default: 1)"); #define HCA_GLOBAL_CAP_MASK 0 Modified: head/sys/xen/interface/io/blkif.h ============================================================================== --- head/sys/xen/interface/io/blkif.h Tue May 17 12:48:30 2016 (r300049) +++ head/sys/xen/interface/io/blkif.h Tue May 17 12:52:31 2016 (r300050) @@ -324,7 +324,7 @@ * access (even when it should be read-only). If the frontend hits the * maximum number of allowed persistently mapped grants, it can fallback * to non persistent mode. This will cause a performance degradation, - * since the the backend driver will still try to map those grants + * since the backend driver will still try to map those grants * persistently. Since the persistent grants protocol is compatible with * the previous protocol, a frontend driver can choose to work in * persistent mode even when the backend doesn't support it. Modified: head/usr.bin/numactl/numactl.1 ============================================================================== --- head/usr.bin/numactl/numactl.1 Tue May 17 12:48:30 2016 (r300049) +++ head/usr.bin/numactl/numactl.1 Tue May 17 12:52:31 2016 (r300050) @@ -83,7 +83,7 @@ The options are as follows: .Bl -tag -width ".Fl -cpudomain Ar domain" .It Fl -cpudomain Ar domain , Fl c Ar domain Set the given CPU scheduling policy. -Constrain the the object (tid, pid, command) to run on CPUs +Constrain the object (tid, pid, command) to run on CPUs that belong to the given domain. .It Fl -get , Fl g Retrieve the NUMA policy for the given thread or process id. Modified: head/usr.sbin/bsdconfig/share/dialog.subr ============================================================================== --- head/usr.sbin/bsdconfig/share/dialog.subr Tue May 17 12:48:30 2016 (r300049) +++ head/usr.sbin/bsdconfig/share/dialog.subr Tue May 17 12:52:31 2016 (r300050) @@ -1815,7 +1815,7 @@ f_dialog_inputstr_fetch() # f_dialog_input $var_to_set $prompt [$init [$hline]] # # Prompt the user with a dialog(1) inputbox to enter some value. The inputbox -# remains until the the user presses ENTER or ESC, or otherwise ends the +# remains until the user presses ENTER or ESC, or otherwise ends the # editing session (by selecting `Cancel' for example). # # If the user presses ENTER, the exit status is zero (success), otherwise if Modified: head/usr.sbin/pciconf/pciconf.8 ============================================================================== --- head/usr.sbin/pciconf/pciconf.8 Tue May 17 12:48:30 2016 (r300049) +++ head/usr.sbin/pciconf/pciconf.8 Tue May 17 12:52:31 2016 (r300050) @@ -237,7 +237,7 @@ prefix indicates if the keyword is read- or read-write .Dq rw . The second string provides the keyword name. -The text after the the equals sign lists the value of the keyword which is +The text after the equals sign lists the value of the keyword which is usually an ASCII string. .Pp If the optional
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201605171252.u4HCqVeM035419>