Date: Thu, 27 Dec 2018 06:54:19 -0500 From: <starikarp@yandex.com> To: Pete Wright <pete@nomadlogic.org> Cc: freebsd-x11@freebsd.org Subject: Re: xserver - black screen Message-ID: <20181227065419.679201d8@yandex.com> In-Reply-To: <83c41986-18b1-ce22-6b30-b689efabab7c@nomadlogic.org> References: <20181221172029.6a769ebc@yandex.com> <e4ed3bab-9e76-aef5-11a6-3682ff1caec4@nomadlogic.org> <20181222122918.74010adf@yandex.com> <83c41986-18b1-ce22-6b30-b689efabab7c@nomadlogic.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--MP_/qf4H=dstXmmfGC_TN7_Td/V
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
On Sat, 22 Dec 2018 11:22:46 -0800
Pete Wright <pete@nomadlogic.org> wrote:
>=20
>=20
> hopefully there will more useful info in the dmesg buffer when you
> load the radeonkms driver vi rc.conf.=C2=A0 one final thing you can also
> try is uninstalling the drm-kmod package and installing the
> "drm-legacy-kmod" package if you haven't tested that already.
>=20
> cheers,
> -pete
>=20
Today I start again kldload radeonkms.ko.
I have installed drm-kmod legacy and ATI drivers legacy too and put
in /etc/rc.conf kld_list=3D"/boot/modules/radeonkms.ko"
and shutdown computer and start again.
I attached file message.txt which start with the new settings.
Result was black screen but I did log as root and shutdown. About 10
minutes later I did star again without kld_list in rc.conf and you can
see in the message.txt also.
Do you think do I have any chance to solved the problem or stay with
scfb driver, please?
Thank you.
--MP_/qf4H=dstXmmfGC_TN7_Td/V
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=message.txt
Dec 27 06:27:27 lumiwa newsyslog[66183]: logfile first created
Dec 27 06:27:27 lumiwa syslogd: kernel boot file is /boot/kernel/kernel
Dec 27 06:27:27 lumiwa kernel: ---<<BOOT>>---
Dec 27 06:27:27 lumiwa kernel: Copyright (c) 1992-2018 The FreeBSD Project.
Dec 27 06:27:27 lumiwa kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Dec 27 06:27:27 lumiwa kernel: The Regents of the University of California. All rights reserved.
Dec 27 06:27:27 lumiwa kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Dec 27 06:27:27 lumiwa kernel: FreeBSD 12.0-RELEASE r341666 GENERIC amd64
Dec 27 06:27:27 lumiwa kernel: FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
Dec 27 06:27:27 lumiwa kernel: VT(efifb): resolution 2560x1440
Dec 27 06:27:27 lumiwa kernel: CPU: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (2793.06-MHz K8-class CPU)
Dec 27 06:27:27 lumiwa kernel: Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5
Dec 27 06:27:27 lumiwa kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Dec 27 06:27:27 lumiwa kernel: Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
Dec 27 06:27:27 lumiwa kernel: AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
Dec 27 06:27:27 lumiwa kernel: AMD Features2=0x1<LAHF>
Dec 27 06:27:27 lumiwa kernel: VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID
Dec 27 06:27:27 lumiwa kernel: TSC: P-state invariant, performance statistics
Dec 27 06:27:27 lumiwa kernel: real memory = 8589934592 (8192 MB)
Dec 27 06:27:27 lumiwa kernel: avail memory = 8264990720 (7882 MB)
Dec 27 06:27:27 lumiwa kernel: Event timer "LAPIC" quality 100
Dec 27 06:27:27 lumiwa kernel: ACPI APIC Table: <APPLE Apple00>
Dec 27 06:27:27 lumiwa kernel: FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
Dec 27 06:27:27 lumiwa kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
Dec 27 06:27:27 lumiwa kernel: random: unblocking device.
Dec 27 06:27:27 lumiwa kernel: ioapic0: Changing APIC ID to 2
Dec 27 06:27:27 lumiwa kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Dec 27 06:27:27 lumiwa kernel: Launching APs: 1 3 6 4 7 2 5
Dec 27 06:27:27 lumiwa kernel: Timecounter "TSC-low" frequency 1396531447 Hz quality 1000
Dec 27 06:27:27 lumiwa kernel: Cuse v0.1.35 @ /dev/cuse
Dec 27 06:27:27 lumiwa kernel: random: entropy device external interface
Dec 27 06:27:27 lumiwa kernel: kbd0 at kbdmux0
Dec 27 06:27:27 lumiwa kernel: netmap: loaded module
Dec 27 06:27:27 lumiwa kernel: [ath_hal] loaded
Dec 27 06:27:27 lumiwa kernel: module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
Dec 27 06:27:27 lumiwa kernel: nexus0
Dec 27 06:27:27 lumiwa kernel: efirtc0: <EFI Realtime Clock> on motherboard
Dec 27 06:27:27 lumiwa kernel: efirtc0: registered as a time-of-day clock, resolution 1.000000s
Dec 27 06:27:27 lumiwa kernel: cryptosoft0: <software crypto> on motherboard
Dec 27 06:27:27 lumiwa kernel: acpi0: <APPLE Apple00> on motherboard
Dec 27 06:27:27 lumiwa kernel: acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
Dec 27 06:27:27 lumiwa kernel: acpi0: Power Button (fixed)
Dec 27 06:27:27 lumiwa kernel: hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Dec 27 06:27:27 lumiwa kernel: Timecounter "HPET" frequency 14318180 Hz quality 950
Dec 27 06:27:27 lumiwa kernel: Event timer "HPET" frequency 14318180 Hz quality 550
Dec 27 06:27:27 lumiwa kernel: cpu0: <ACPI CPU> on acpi0
Dec 27 06:27:27 lumiwa kernel: atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
Dec 27 06:27:27 lumiwa kernel: atrtc0: registered as a time-of-day clock, resolution 1.000000s
Dec 27 06:27:27 lumiwa kernel: Event timer "RTC" frequency 32768 Hz quality 0
Dec 27 06:27:27 lumiwa kernel: attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Dec 27 06:27:27 lumiwa kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Dec 27 06:27:27 lumiwa kernel: Event timer "i8254" frequency 1193182 Hz quality 100
Dec 27 06:27:27 lumiwa kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
Dec 27 06:27:27 lumiwa kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
Dec 27 06:27:27 lumiwa kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Dec 27 06:27:27 lumiwa kernel: pci0: <ACPI PCI bus> on pcib0
Dec 27 06:27:27 lumiwa kernel: pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
Dec 27 06:27:27 lumiwa kernel: pci1: <ACPI PCI bus> on pcib1
Dec 27 06:27:27 lumiwa kernel: vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xc0000000-0xcfffffff,0xd0620000-0xd062ffff at device 0.0 on pci1
Dec 27 06:27:27 lumiwa kernel: hdac0: <ATI RV770 HDA Controller> mem 0xd0630000-0xd0633fff at device 0.1 on pci1
Dec 27 06:27:27 lumiwa kernel: uhci0: <UHCI (generic) USB controller> port 0x3060-0x307f at device 26.0 on pci0
Dec 27 06:27:27 lumiwa kernel: uhci0: LegSup = 0x2400
Dec 27 06:27:27 lumiwa kernel: usbus0 on uhci0
Dec 27 06:27:27 lumiwa kernel: usbus0: 12Mbps Full Speed USB v1.0
Dec 27 06:27:27 lumiwa kernel: ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xd0705c00-0xd0705fff at device 26.7 on pci0
Dec 27 06:27:27 lumiwa kernel: usbus1: EHCI version 1.0
Dec 27 06:27:27 lumiwa kernel: usbus1 on ehci0
Dec 27 06:27:27 lumiwa kernel: usbus1: 480Mbps High Speed USB v2.0
Dec 27 06:27:27 lumiwa kernel: hdac1: <Intel Ibex Peak HDA Controller> mem 0xd0700000-0xd0703fff at device 27.0 on pci0
Dec 27 06:27:27 lumiwa kernel: pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
Dec 27 06:27:27 lumiwa kernel: pcib2: [GIANT-LOCKED]
Dec 27 06:27:27 lumiwa kernel: pci2: <ACPI PCI bus> on pcib2
Dec 27 06:27:27 lumiwa kernel: bge0: <Broadcom NetXtreme Fast Ethernet Controller, ASIC rev. 0x5784100> mem 0xd0500000-0xd050ffff at device 0.0 on pci2
Dec 27 06:27:27 lumiwa kernel: bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
Dec 27 06:27:27 lumiwa kernel: miibus0: <MII bus> on bge0
Dec 27 06:27:27 lumiwa kernel: brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
Dec 27 06:27:27 lumiwa kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Dec 27 06:27:27 lumiwa kernel: bge0: Using defaults for TSO: 65518/35/2048
Dec 27 06:27:27 lumiwa kernel: bge0: Ethernet address: 00:23:df:ff:f1:9f
Dec 27 06:27:27 lumiwa kernel: pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
Dec 27 06:27:27 lumiwa kernel: pcib3: [GIANT-LOCKED]
Dec 27 06:27:27 lumiwa kernel: pci3: <ACPI PCI bus> on pcib3
Dec 27 06:27:27 lumiwa kernel: ath0: <Atheros 9280> mem 0xd0400000-0xd040ffff at device 0.0 on pci3
Dec 27 06:27:27 lumiwa kernel: ath0: [HT] enabling HT modes
Dec 27 06:27:27 lumiwa kernel: ath0: [HT] 1 stream STBC receive enabled
Dec 27 06:27:27 lumiwa kernel: ath0: [HT] 1 stream STBC transmit enabled
Dec 27 06:27:27 lumiwa kernel: ath0: [HT] 2 RX streams; 2 TX streams
Dec 27 06:27:27 lumiwa kernel: ath0: AR9280 mac 128.2 RF5133 phy 13.0
Dec 27 06:27:27 lumiwa kernel: ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
Dec 27 06:27:27 lumiwa kernel: pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
Dec 27 06:27:27 lumiwa kernel: pcib4: [GIANT-LOCKED]
Dec 27 06:27:27 lumiwa kernel: pci4: <ACPI PCI bus> on pcib4
Dec 27 06:27:27 lumiwa kernel: pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
Dec 27 06:27:27 lumiwa kernel: pci5: <ACPI PCI bus> on pcib5
Dec 27 06:27:27 lumiwa kernel: fwohci0: <1394 Open Host Controller Interface> mem 0xd0304000-0xd03047ff,0xd0300000-0xd0303fff at device 0.0 on pci5
Dec 27 06:27:27 lumiwa kernel: fwohci0: OHCI version 1.10 (ROM=0)
Dec 27 06:27:27 lumiwa kernel: fwohci0: No. of Isochronous channels is 8.
Dec 27 06:27:27 lumiwa kernel: fwohci0: EUI64 d4:9a:20:ff:fe:cd:f9:52
Dec 27 06:27:27 lumiwa kernel: fwohci0: invalid speed 7 (fixed to 3).
Dec 27 06:27:27 lumiwa kernel: fwohci0: Phy 1394a available S800, 3 ports.
Dec 27 06:27:27 lumiwa kernel: fwohci0: Link S800, max_rec 4096 bytes.
Dec 27 06:27:27 lumiwa kernel: fwohci0: phy int
Dec 27 06:27:27 lumiwa kernel: firewire0: <IEEE1394(FireWire) bus> on fwohci0
Dec 27 06:27:27 lumiwa kernel: sbp0: <SBP-2/SCSI over FireWire> on firewire0
Dec 27 06:27:27 lumiwa kernel: fwohci0: Initiate bus reset
Dec 27 06:27:27 lumiwa kernel: fwohci0: fwohci_intr_core: BUS reset
Dec 27 06:27:27 lumiwa kernel: fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB
Dec 27 06:27:27 lumiwa kernel: fwohci0: PhysicalUpperBound = 0x00000000
Dec 27 06:27:27 lumiwa kernel: fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
Dec 27 06:27:27 lumiwa kernel: firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
Dec 27 06:27:27 lumiwa kernel: firewire0: bus manager 0
Dec 27 06:27:27 lumiwa kernel: pcib6: <ACPI PCI-PCI bridge> at device 28.3 on pci0
Dec 27 06:27:27 lumiwa kernel: pcib6: [GIANT-LOCKED]
Dec 27 06:27:27 lumiwa kernel: pcib7: <PCI-PCI bridge> at device 28.4 on pci0
Dec 27 06:27:27 lumiwa kernel: pcib7: [GIANT-LOCKED]
Dec 27 06:27:27 lumiwa kernel: uhci1: <UHCI (generic) USB controller> port 0x3040-0x305f at device 29.0 on pci0
Dec 27 06:27:27 lumiwa kernel: uhci1: LegSup = 0x2400
Dec 27 06:27:27 lumiwa kernel: usbus2 on uhci1
Dec 27 06:27:27 lumiwa kernel: usbus2: 12Mbps Full Speed USB v1.0
Dec 27 06:27:27 lumiwa kernel: ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xd0705800-0xd0705bff at device 29.7 on pci0
Dec 27 06:27:27 lumiwa kernel: usbus3: EHCI version 1.0
Dec 27 06:27:27 lumiwa kernel: usbus3 on ehci1
Dec 27 06:27:27 lumiwa kernel: usbus3: 480Mbps High Speed USB v2.0
Dec 27 06:27:27 lumiwa kernel: pcib8: <PCI-PCI bridge> at device 30.0 on pci0
Dec 27 06:27:27 lumiwa kernel: pci6: <PCI bus> on pcib8
Dec 27 06:27:27 lumiwa kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Dec 27 06:27:27 lumiwa kernel: isa0: <ISA bus> on isab0
Dec 27 06:27:27 lumiwa kernel: ahci0: <Intel Ibex Peak AHCI SATA controller> port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3020-0x303f mem 0xd0705000-0xd07057ff at device 31.2 on pci0
Dec 27 06:27:27 lumiwa kernel: ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
Dec 27 06:27:27 lumiwa kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
Dec 27 06:27:27 lumiwa kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
Dec 27 06:27:27 lumiwa kernel: ahciem0: <AHCI enclosure management bridge> on ahci0
Dec 27 06:27:27 lumiwa kernel: acpi_button0: <Power Button> on acpi0
Dec 27 06:27:27 lumiwa kernel: acpi_button1: <Sleep Button> on acpi0
Dec 27 06:27:27 lumiwa kernel: pcib9: <ACPI Host-PCI bridge> on acpi0
Dec 27 06:27:27 lumiwa kernel: pci7: <ACPI PCI bus> on pcib9
Dec 27 06:27:27 lumiwa kernel: coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Dec 27 06:27:27 lumiwa kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
Dec 27 06:27:27 lumiwa kernel: Timecounters tick every 1.000 msec
Dec 27 06:27:27 lumiwa kernel: hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
Dec 27 06:27:27 lumiwa kernel: hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
Dec 27 06:27:27 lumiwa kernel: pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
Dec 27 06:27:27 lumiwa kernel: hdacc1: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac1
Dec 27 06:27:27 lumiwa kernel: hdaa1: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc1
Dec 27 06:27:27 lumiwa kernel: pcm1: <Cirrus Logic CS4206 (Analog 6ch/2.0)> at nid 9,10,11 and 13 on hdaa1
Dec 27 06:27:27 lumiwa kernel: pcm2: <Cirrus Logic CS4206 (Rear Analog Line-in)> at nid 12 on hdaa1
Dec 27 06:27:27 lumiwa kernel: pcm3: <Cirrus Logic CS4206 (Rear Digital)> at nid 16 and 15 on hdaa1
Dec 27 06:27:27 lumiwa kernel: ugen0.1: <Intel UHCI root HUB> at usbus0
Dec 27 06:27:27 lumiwa kernel: ugen2.1: <Intel UHCI root HUB> at usbus2
Dec 27 06:27:27 lumiwa kernel: ugen1.1: <Intel EHCI root HUB> at usbus1
Dec 27 06:27:27 lumiwa kernel: ugen3.1: <Intel EHCI root HUB> at usbus3
Dec 27 06:27:27 lumiwa kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Dec 27 06:27:27 lumiwa kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Dec 27 06:27:27 lumiwa kernel: uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Dec 27 06:27:27 lumiwa kernel: uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Dec 27 06:27:27 lumiwa kernel: uhub0: 2 ports with 2 removable, self powered
Dec 27 06:27:27 lumiwa kernel: uhub1: 2 ports with 2 removable, self powered
Dec 27 06:27:27 lumiwa kernel: uhub3: 6 ports with 6 removable, self powered
Dec 27 06:27:27 lumiwa kernel: bge0: link state changed to UP
Dec 27 06:27:27 lumiwa kernel: uhub2: 8 ports with 8 removable, self powered
Dec 27 06:27:27 lumiwa kernel: ugen1.2: <vendor 0x0424 product 0x2514> at usbus1
Dec 27 06:27:27 lumiwa kernel: uhub4 on uhub3
Dec 27 06:27:27 lumiwa kernel: uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.03, addr 2> on usbus1
Dec 27 06:27:27 lumiwa kernel: uhub4: MTT enabled
Dec 27 06:27:27 lumiwa kernel: ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
Dec 27 06:27:27 lumiwa kernel: ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
Dec 27 06:27:27 lumiwa kernel: ses0: SEMB SES Device
Dec 27 06:27:27 lumiwa kernel: cd0 at ahcich1 bus 0 scbus2 target 0 lun 0
Dec 27 06:27:27 lumiwa kernel: cd0: <OPTIARC DVD RW AD-5680H 3AHB> Removable CD-ROM SCSI device
Dec 27 06:27:27 lumiwa kernel: cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
Dec 27 06:27:27 lumiwa kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present
Dec 27 06:27:27 lumiwa kernel: ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
Dec 27 06:27:27 lumiwa kernel: ada0: <Mercury Electra 3G SSD R0522A0> ACS-2 ATA SATA 2.x device
Dec 27 06:27:27 lumiwa kernel: ada0: Serial Number OW181126100473DEA
Dec 27 06:27:27 lumiwa kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
Dec 27 06:27:27 lumiwa kernel: ada0: Command Queueing enabled
Dec 27 06:27:27 lumiwa kernel: ada0: 476940MB (976773168 512 byte sectors)
Dec 27 06:27:27 lumiwa kernel: Trying to mount root from ufs:/dev/ada0p2 [rw]...
Dec 27 06:27:27 lumiwa kernel: GEOM_ELI: Device ada0p3.eli created.
Dec 27 06:27:27 lumiwa kernel: GEOM_ELI: Encryption: AES-XTS 128
Dec 27 06:27:27 lumiwa kernel: GEOM_ELI: Crypto: software
Dec 27 06:27:27 lumiwa kernel: info: [drm] Initialized drm 1.1.0 20060810
Dec 27 06:27:27 lumiwa kernel: uhub4: 4 ports with 2 removable, self powered
Dec 27 06:27:27 lumiwa kernel: drmn0: =======================================================
Dec 27 06:27:27 lumiwa kernel: drmn0: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg
Dec 27 06:27:27 lumiwa kernel: drmn0: =======================================================
Dec 27 06:27:27 lumiwa kernel: drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers
Dec 27 06:27:27 lumiwa kernel: drmn0: =======================================================
Dec 27 06:27:27 lumiwa kernel: drmn0: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg
Dec 27 06:27:27 lumiwa kernel: drmn0: =======================================================
Dec 27 06:27:27 lumiwa kernel: drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers
Dec 27 06:27:27 lumiwa kernel: drmn0: <ATI Mobility Radeon HD 4850> on vgapci0
Dec 27 06:27:27 lumiwa kernel: info: [drm] RADEON_IS_PCIE
Dec 27 06:27:27 lumiwa kernel: info: [drm] initializing kernel modesetting (RV770 0x1002:0x944A 0x106B:0x00B5).
Dec 27 06:27:27 lumiwa kernel: info: [drm] register mmio base: 0xD0620000
Dec 27 06:27:27 lumiwa kernel: info: [drm] register mmio size: 65536
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=944a
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_atrm_get_bios: Get ACPI device handle
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM"
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: AE_NOT_FOUND
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
Dec 27 06:27:27 lumiwa kernel: info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
Dec 27 06:27:27 lumiwa kernel: info: [drm] igp_read_bios_from_vram: VRAM base address: 0xc0000000
Dec 27 06:27:27 lumiwa kernel: info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800c0000000 (262144 bytes)
Dec 27 06:27:27 lumiwa kernel: info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0xBA1A
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_read_bios: Map address: 0xfffff800d0600000 (131072 bytes)
Dec 27 06:27:27 lumiwa kernel: info: [drm] ATOM BIOS: 113
Dec 27 06:27:27 lumiwa kernel: drmn0: info: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
Dec 27 06:27:27 lumiwa kernel: drmn0: info: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
Dec 27 06:27:27 lumiwa kernel: info: [drm] Detected VRAM RAM=512M, BAR=256M
Dec 27 06:27:27 lumiwa kernel: info: [drm] RAM width 256bits DDR
Dec 27 06:27:27 lumiwa kernel: [TTM] Zone kernel: Available graphics memory: 4169992 kiB
Dec 27 06:27:27 lumiwa kernel: [TTM] Zone dma32: Available graphics memory: 2097152 kiB
Dec 27 06:27:27 lumiwa kernel: [TTM] Initializing pool allocator
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon: 512M of VRAM memory ready
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon: 512M of GTT memory ready.
Dec 27 06:27:27 lumiwa kernel: info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Dec 27 06:27:27 lumiwa kernel: info: [drm] Driver supports precise vblank timestamp query.
Dec 27 06:27:27 lumiwa kernel: info: [drm] MSI enabled 1 message(s)
Dec 27 06:27:27 lumiwa kernel: drmn0: info: radeon: using MSI.
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon: irq initialized.
Dec 27 06:27:27 lumiwa kernel: info: [drm] GART: num cpu pages 131072, num gpu pages 131072
Dec 27 06:27:27 lumiwa kernel: info: [drm] probing gen 2 caps for device 8086:d138 = 2/0
Dec 27 06:27:27 lumiwa kernel: info: [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
Dec 27 06:27:27 lumiwa kernel: info: [drm] Loading RV770 Microcode
Dec 27 06:27:27 lumiwa kernel: radeon/RV770_pfp.bin: could not load firmware image, error 2
Dec 27 06:27:27 lumiwa kernel: ugen3.2: <vendor 0x0424 product 0x2514> at usbus3
Dec 27 06:27:27 lumiwa kernel: uhub5 on uhub2
Dec 27 06:27:27 lumiwa kernel: uhub5: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.03, addr 2> on usbus3
Dec 27 06:27:27 lumiwa kernel: uhub5: MTT enabled
Dec 27 06:27:27 lumiwa kernel: ugen1.3: <Apple Inc. BRCM2046 Hub> at usbus1
Dec 27 06:27:27 lumiwa kernel: uhub6 on uhub4
Dec 27 06:27:27 lumiwa kernel: uhub6: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus1
Dec 27 06:27:27 lumiwa kernel: radeon/RV770_pfp.bin: could not load firmware image, error 2
Dec 27 06:27:27 lumiwa kernel: uhub5: 4 ports with 2 removable, self powered
Dec 27 06:27:27 lumiwa kernel: drmn0: Successfully loaded firmware image with name (mapped name): radeon/RV770_pfp.bin (radeon_RV770_pfp_bin)
Dec 27 06:27:27 lumiwa kernel: radeon/RV770_me.bin: could not load firmware image, error 2
Dec 27 06:27:27 lumiwa kernel: uhub6: 3 ports with 0 removable, self powered
Dec 27 06:27:27 lumiwa kernel: radeon/RV770_me.bin: could not load firmware image, error 2
Dec 27 06:27:27 lumiwa kernel: ugen3.3: <Apple Inc. Built-in iSight> at usbus3
Dec 27 06:27:27 lumiwa kernel: ugen1.4: <Apple Inc. Bluetooth USB Host Controller> at usbus1
Dec 27 06:27:27 lumiwa kernel: drmn0: Successfully loaded firmware image with name (mapped name): radeon/RV770_me.bin (radeon_RV770_me_bin)
Dec 27 06:27:27 lumiwa kernel: radeon/R700_rlc.bin: could not load firmware image, error 2
Dec 27 06:27:27 lumiwa kernel: ugen3.4: <Apple Computer, Inc. IR Receiver> at usbus3
Dec 27 06:27:27 lumiwa kernel: radeon/R700_rlc.bin: could not load firmware image, error 2
Dec 27 06:27:27 lumiwa kernel: ugen1.5: <vendor 0x05ac product 0x820a> at usbus1
Dec 27 06:27:27 lumiwa kernel: ukbd0 on uhub6
Dec 27 06:27:27 lumiwa kernel: ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 5> on usbus1
Dec 27 06:27:27 lumiwa kernel: kbd1 at ukbd0
Dec 27 06:27:27 lumiwa kernel: drmn0: Successfully loaded firmware image with name (mapped name): radeon/R700_rlc.bin (radeon_R700_rlc_bin)
Dec 27 06:27:27 lumiwa kernel: info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
Dec 27 06:27:27 lumiwa kernel: drmn0: info: WB enabled
Dec 27 06:27:27 lumiwa kernel: drmn0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0xfffff80006cdfc00
Dec 27 06:27:27 lumiwa kernel: drmn0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x0xfffff80006cdfc0c
Dec 27 06:27:27 lumiwa kernel: error: [drm:pid33573:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD)
Dec 27 06:27:27 lumiwa kernel: drmn0: error: disabling GPU acceleration
Dec 27 06:27:27 lumiwa kernel: drmn0: warning: 0xfffff80006a2a000 unpin not necessary
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon_device_init: Taking over the fictitious range 0xc0000000-0xd0000000
Dec 27 06:27:27 lumiwa kernel: radeon_iicbb0 on drmn0
Dec 27 06:27:27 lumiwa kernel: iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
Dec 27 06:27:27 lumiwa kernel: iic0: <I2C generic I/O> on iicbus0
Dec 27 06:27:27 lumiwa kernel: radeon_iicbb1 on drmn0
Dec 27 06:27:27 lumiwa kernel: iicbus1: <Philips I2C bus> on iicbb1 addr 0xff
Dec 27 06:27:27 lumiwa kernel: iic1: <I2C generic I/O> on iicbus1
Dec 27 06:27:27 lumiwa kernel: radeon_iicbb2 on drmn0
Dec 27 06:27:27 lumiwa kernel: iicbus2: <Philips I2C bus> on iicbb2 addr 0xff
Dec 27 06:27:27 lumiwa kernel: iic2: <I2C generic I/O> on iicbus2
Dec 27 06:27:27 lumiwa kernel: radeon_iicbb3 on drmn0
Dec 27 06:27:27 lumiwa kernel: iicbus3: <Philips I2C bus> on iicbb3 addr 0xff
Dec 27 06:27:27 lumiwa kernel: iic3: <I2C generic I/O> on iicbus3
Dec 27 06:27:27 lumiwa kernel: radeon_iicbb4 on drmn0
Dec 27 06:27:27 lumiwa kernel: iicbus4: <Philips I2C bus> on iicbb4 addr 0xff
Dec 27 06:27:27 lumiwa kernel: iic4: <I2C generic I/O> on iicbus4
Dec 27 06:27:27 lumiwa kernel: drm_iic_dp_aux0 on drmn0
Dec 27 06:27:27 lumiwa kernel: drm_iic_dp_aux1 on drmn0
Dec 27 06:27:27 lumiwa kernel: info: [drm] Radeon Display Connectors
Dec 27 06:27:27 lumiwa kernel: info: [drm] Connector 0:
Dec 27 06:27:27 lumiwa kernel: info: [drm] DP-1
Dec 27 06:27:27 lumiwa kernel: info: [drm] HPD2
Dec 27 06:27:27 lumiwa kernel: info: [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
Dec 27 06:27:27 lumiwa kernel: info: [drm] Encoders:
Dec 27 06:27:27 lumiwa kernel: info: [drm] DFP1: INTERNAL_UNIPHY
Dec 27 06:27:27 lumiwa kernel: info: [drm] Connector 1:
Dec 27 06:27:27 lumiwa kernel: info: [drm] eDP-1
Dec 27 06:27:27 lumiwa kernel: info: [drm] HPD3
Dec 27 06:27:27 lumiwa kernel: info: [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
Dec 27 06:27:27 lumiwa kernel: info: [drm] Encoders:
Dec 27 06:27:27 lumiwa kernel: info: [drm] LCD1: INTERNAL_UNIPHY
Dec 27 06:27:27 lumiwa kernel: info: [drm] Connector 2:
Dec 27 06:27:27 lumiwa kernel: info: [drm] VGA-1
Dec 27 06:27:27 lumiwa kernel: info: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
Dec 27 06:27:27 lumiwa kernel: info: [drm] Encoders:
Dec 27 06:27:27 lumiwa kernel: info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
Dec 27 06:27:27 lumiwa kernel: info: [drm] Special thermal controller config
Dec 27 06:27:27 lumiwa kernel: info: [drm] radeon: power management initialized
Dec 27 06:27:27 lumiwa kernel: info: [drm] Connector DP-1: get mode from tunables:
Dec 27 06:27:27 lumiwa kernel: info: [drm] - kern.vt.fb.modes.DP-1
Dec 27 06:27:27 lumiwa kernel: info: [drm] - kern.vt.fb.default_mode
Dec 27 06:27:27 lumiwa kernel: info: [drm] Connector eDP-1: get mode from tunables:
Dec 27 06:27:27 lumiwa kernel: info: [drm] - kern.vt.fb.modes.eDP-1
Dec 27 06:27:27 lumiwa kernel: info: [drm] - kern.vt.fb.default_mode
Dec 27 06:27:27 lumiwa kernel: info: [drm] Connector VGA-1: get mode from tunables:
Dec 27 06:27:27 lumiwa kernel: info: [drm] - kern.vt.fb.modes.VGA-1
Dec 27 06:27:27 lumiwa kernel: info: [drm] - kern.vt.fb.default_mode
Dec 27 06:27:27 lumiwa kernel: info: [drm] fb mappable at 0xC0142000
Dec 27 06:27:27 lumiwa kernel: info: [drm] vram apper at 0xC0000000
Dec 27 06:27:27 lumiwa kernel: info: [drm] size 14745600
Dec 27 06:27:27 lumiwa kernel: info: [drm] fb depth is 24
Dec 27 06:27:27 lumiwa kernel: info: [drm] pitch is 10240
Dec 27 06:27:27 lumiwa kernel: fbd0 on drmn0
Dec 27 06:27:27 lumiwa kernel: VT: Replacing driver "efifb" with new "fb".
Dec 27 06:27:27 lumiwa kernel: info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0
Dec 27 06:27:27 lumiwa kernel: ugen3.5: <vendor 0x04d9 product 0x1400> at usbus3
Dec 27 06:27:27 lumiwa kernel: ukbd1 on uhub5
Dec 27 06:27:27 lumiwa kernel: ukbd1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 5> on usbus3
Dec 27 06:27:27 lumiwa kernel: kbd2 at ukbd1
Dec 27 06:27:27 lumiwa kernel: ugen1.6: <vendor 0x05ac product 0x820b> at usbus1
Dec 27 06:27:27 lumiwa kernel: lo0: link state changed to UP
Dec 27 06:27:27 lumiwa kernel: ugen1.7: <Apple Card Reader> at usbus1
Dec 27 06:27:27 lumiwa kernel: umass0 on uhub4
Dec 27 06:27:27 lumiwa kernel: umass0: <Apple Card Reader, class 0/0, rev 2.00/98.33, addr 7> on usbus1
Dec 27 06:27:27 lumiwa kernel: umass0: SCSI over Bulk-Only; quirks = 0x4000
Dec 27 06:27:27 lumiwa kernel: umass0:4:0: Attached to scbus4
Dec 27 06:27:27 lumiwa kernel: bge0: link state changed to DOWN
Dec 27 06:27:27 lumiwa kernel: da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
Dec 27 06:27:27 lumiwa kernel: da0: <APPLE SD Card Reader 1.00> Removable Direct Access SCSI device
Dec 27 06:27:27 lumiwa kernel: da0: Serial Number 000000009833
Dec 27 06:27:27 lumiwa kernel: da0: 40.000MB/s transfers
Dec 27 06:27:27 lumiwa kernel: da0: Attempt to query device size failed: NOT READY, Medium not present
Dec 27 06:27:27 lumiwa kernel: da0: quirks=0x2<NO_6_BYTE>
Dec 27 06:27:27 lumiwa kernel: ugen1.8: <MediaTek Inc MT1806> at usbus1
Dec 27 06:27:27 lumiwa kernel: umass1 on uhub4
Dec 27 06:27:27 lumiwa kernel: umass1: <6238--Storage> on usbus1
Dec 27 06:27:27 lumiwa kernel: umass1: 8070i (ATAPI) over Bulk-Only; quirks = 0x0100
Dec 27 06:27:27 lumiwa kernel: umass1:5:1: Attached to scbus5
Dec 27 06:27:27 lumiwa kernel: cd1 at umass-sim1 bus 1 scbus5 target 0 lun 0
Dec 27 06:27:27 lumiwa kernel: cd1: <ASUS SDRW-08D2S-U F401> Removable CD-ROM SCSI device
Dec 27 06:27:27 lumiwa kernel: cd1: 40.000MB/s transfers
Dec 27 06:27:27 lumiwa kernel: cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Dec 27 06:27:27 lumiwa kernel: cd1: quirks=0x10<10_BYTE_ONLY>
Dec 27 06:27:27 lumiwa kernel: bge0: link state changed to UP
Dec 27 06:27:27 lumiwa kernel: ubt0 on uhub6
Dec 27 06:27:27 lumiwa kernel: ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/2.06, addr 4> on usbus1
Dec 27 06:27:27 lumiwa kernel: uhid0 on uhub5
Dec 27 06:27:27 lumiwa kernel: uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 4> on usbus3
Dec 27 06:27:27 lumiwa kernel: ums0 on uhub6
Dec 27 06:27:27 lumiwa kernel: ums0: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 6> on usbus1
Dec 27 06:27:27 lumiwa kernel: ums0: 3 buttons and [XY] coordinates ID=2
Dec 27 06:27:27 lumiwa kernel: ums1 on uhub5
Dec 27 06:27:27 lumiwa kernel: ums1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 5> on usbus3
Dec 27 06:27:27 lumiwa kernel: ums1: 5 buttons and [XYZ] coordinates ID=1
Dec 27 06:27:27 lumiwa kernel: WARNING: attempt to domain_add(bluetooth) after domainfinalize()
Dec 27 06:27:27 lumiwa kernel: WARNING: attempt to domain_add(netgraph) after domainfinalize()
Dec 27 06:27:27 lumiwa kernel: ugen1.5: <vendor 0x05ac product 0x820a> at usbus1 (disconnected)
Dec 27 06:27:27 lumiwa kernel: ukbd0: at uhub6, port 2, addr 5 (disconnected)
Dec 27 06:27:27 lumiwa kernel: ukbd0: detached
Dec 27 06:27:27 lumiwa kernel: ugen1.6: <vendor 0x05ac product 0x820b> at usbus1 (disconnected)
Dec 27 06:27:27 lumiwa kernel: ums0: at uhub6, port 3, addr 6 (disconnected)
Dec 27 06:27:27 lumiwa kernel: ums0: detached
Dec 27 06:27:27 lumiwa kernel: ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
Dec 27 06:27:34 lumiwa kernel: Security policy loaded: MAC/ntpd (mac_ntpd)
Dec 27 06:27:34 lumiwa ntpd[65198]: ntpd 4.2.8p12-a (1): Starting
Dec 27 06:27:34 lumiwa ntpd[65514]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): good hash signature
Dec 27 06:27:34 lumiwa ntpd[65514]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): loaded, expire=2019-06-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Dec 27 06:27:35 lumiwa dbus[45370]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Dec 27 06:27:35 lumiwa dbus[45370]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Dec 27 06:29:32 lumiwa login[8408]: ROOT LOGIN (root) ON ttyv1
Dec 27 06:29:46 lumiwa shutdown[10309]: reboot by root:
Dec 27 06:29:47 lumiwa kernel: .
Dec 27 06:29:47 lumiwa ntpd[65514]: ntpd exiting on signal 15 (Terminated)
Dec 27 06:29:47 lumiwa kernel: .
Dec 27 06:29:49 lumiwa bthidd[52465]: Got signal 15, total number of signals 1
Dec 27 06:29:49 lumiwa kernel: , 65514.
Dec 27 06:29:49 lumiwa kernel: .
Dec 27 06:29:49 lumiwa syslogd: last message repeated 1 times
Dec 27 06:29:50 lumiwa syslogd: exiting on signal 15
Dec 27 06:37:03 lumiwa syslogd: kernel boot file is /boot/kernel/kernel
Dec 27 06:37:03 lumiwa kernel: ---<<BOOT>>---
Dec 27 06:37:03 lumiwa kernel: Copyright (c) 1992-2018 The FreeBSD Project.
Dec 27 06:37:03 lumiwa kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Dec 27 06:37:03 lumiwa kernel: The Regents of the University of California. All rights reserved.
Dec 27 06:37:03 lumiwa kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Dec 27 06:37:03 lumiwa kernel: FreeBSD 12.0-RELEASE r341666 GENERIC amd64
Dec 27 06:37:03 lumiwa kernel: FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
Dec 27 06:37:03 lumiwa kernel: VT(efifb): resolution 2560x1440
Dec 27 06:37:03 lumiwa kernel: CPU: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (2793.06-MHz K8-class CPU)
Dec 27 06:37:03 lumiwa kernel: Origin="GenuineIntel" Id=0x106e5 Family=0x6 Model=0x1e Stepping=5
Dec 27 06:37:03 lumiwa kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Dec 27 06:37:03 lumiwa kernel: Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
Dec 27 06:37:03 lumiwa kernel: AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
Dec 27 06:37:03 lumiwa kernel: AMD Features2=0x1<LAHF>
Dec 27 06:37:03 lumiwa kernel: VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID
Dec 27 06:37:03 lumiwa kernel: TSC: P-state invariant, performance statistics
Dec 27 06:37:03 lumiwa kernel: real memory = 8589934592 (8192 MB)
Dec 27 06:37:03 lumiwa kernel: avail memory = 8264990720 (7882 MB)
Dec 27 06:37:03 lumiwa kernel: Event timer "LAPIC" quality 100
Dec 27 06:37:03 lumiwa kernel: ACPI APIC Table: <APPLE Apple00>
Dec 27 06:37:03 lumiwa kernel: FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
Dec 27 06:37:03 lumiwa kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
Dec 27 06:37:03 lumiwa kernel: random: unblocking device.
Dec 27 06:37:03 lumiwa kernel: ioapic0: Changing APIC ID to 2
Dec 27 06:37:03 lumiwa kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Dec 27 06:37:03 lumiwa kernel: Launching APs: 1 6 2 7 5 3 4
Dec 27 06:37:03 lumiwa kernel: Timecounter "TSC-low" frequency 1396532359 Hz quality 1000
Dec 27 06:37:03 lumiwa kernel: Cuse v0.1.35 @ /dev/cuse
Dec 27 06:37:03 lumiwa kernel: random: entropy device external interface
Dec 27 06:37:03 lumiwa kernel: kbd0 at kbdmux0
Dec 27 06:37:03 lumiwa kernel: netmap: loaded module
Dec 27 06:37:03 lumiwa kernel: [ath_hal] loaded
Dec 27 06:37:03 lumiwa kernel: module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
Dec 27 06:37:03 lumiwa kernel: nexus0
Dec 27 06:37:03 lumiwa kernel: efirtc0: <EFI Realtime Clock> on motherboard
Dec 27 06:37:03 lumiwa kernel: efirtc0: registered as a time-of-day clock, resolution 1.000000s
Dec 27 06:37:03 lumiwa kernel: cryptosoft0: <software crypto> on motherboard
Dec 27 06:37:03 lumiwa kernel: acpi0: <APPLE Apple00> on motherboard
Dec 27 06:37:03 lumiwa kernel: acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
Dec 27 06:37:03 lumiwa kernel: acpi0: Power Button (fixed)
Dec 27 06:37:03 lumiwa kernel: hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Dec 27 06:37:03 lumiwa kernel: Timecounter "HPET" frequency 14318180 Hz quality 950
Dec 27 06:37:03 lumiwa kernel: Event timer "HPET" frequency 14318180 Hz quality 550
Dec 27 06:37:03 lumiwa kernel: cpu0: <ACPI CPU> on acpi0
Dec 27 06:37:03 lumiwa kernel: atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
Dec 27 06:37:03 lumiwa kernel: atrtc0: registered as a time-of-day clock, resolution 1.000000s
Dec 27 06:37:03 lumiwa kernel: Event timer "RTC" frequency 32768 Hz quality 0
Dec 27 06:37:03 lumiwa kernel: attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Dec 27 06:37:03 lumiwa kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Dec 27 06:37:03 lumiwa kernel: Event timer "i8254" frequency 1193182 Hz quality 100
Dec 27 06:37:03 lumiwa kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
Dec 27 06:37:03 lumiwa kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
Dec 27 06:37:03 lumiwa kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Dec 27 06:37:03 lumiwa kernel: pci0: <ACPI PCI bus> on pcib0
Dec 27 06:37:03 lumiwa kernel: pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
Dec 27 06:37:03 lumiwa kernel: pci1: <ACPI PCI bus> on pcib1
Dec 27 06:37:03 lumiwa kernel: vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xc0000000-0xcfffffff,0xd0620000-0xd062ffff at device 0.0 on pci1
Dec 27 06:37:03 lumiwa kernel: hdac0: <ATI RV770 HDA Controller> mem 0xd0630000-0xd0633fff at device 0.1 on pci1
Dec 27 06:37:03 lumiwa kernel: uhci0: <UHCI (generic) USB controller> port 0x3060-0x307f at device 26.0 on pci0
Dec 27 06:37:03 lumiwa kernel: uhci0: LegSup = 0x2400
Dec 27 06:37:03 lumiwa kernel: usbus0 on uhci0
Dec 27 06:37:03 lumiwa kernel: usbus0: 12Mbps Full Speed USB v1.0
Dec 27 06:37:03 lumiwa kernel: ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xd0705c00-0xd0705fff at device 26.7 on pci0
Dec 27 06:37:03 lumiwa kernel: usbus1: EHCI version 1.0
Dec 27 06:37:03 lumiwa kernel: usbus1 on ehci0
Dec 27 06:37:03 lumiwa kernel: usbus1: 480Mbps High Speed USB v2.0
Dec 27 06:37:03 lumiwa kernel: hdac1: <Intel Ibex Peak HDA Controller> mem 0xd0700000-0xd0703fff at device 27.0 on pci0
Dec 27 06:37:03 lumiwa kernel: pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
Dec 27 06:37:03 lumiwa kernel: pcib2: [GIANT-LOCKED]
Dec 27 06:37:03 lumiwa kernel: pci2: <ACPI PCI bus> on pcib2
Dec 27 06:37:03 lumiwa kernel: bge0: <Broadcom NetXtreme Fast Ethernet Controller, ASIC rev. 0x5784100> mem 0xd0500000-0xd050ffff at device 0.0 on pci2
Dec 27 06:37:03 lumiwa kernel: bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
Dec 27 06:37:03 lumiwa kernel: miibus0: <MII bus> on bge0
Dec 27 06:37:03 lumiwa kernel: brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
Dec 27 06:37:03 lumiwa kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Dec 27 06:37:03 lumiwa kernel: bge0: Using defaults for TSO: 65518/35/2048
Dec 27 06:37:03 lumiwa kernel: bge0: Ethernet address: 00:23:df:ff:f1:9f
Dec 27 06:37:03 lumiwa kernel: pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
Dec 27 06:37:03 lumiwa kernel: pcib3: [GIANT-LOCKED]
Dec 27 06:37:03 lumiwa kernel: pci3: <ACPI PCI bus> on pcib3
Dec 27 06:37:03 lumiwa kernel: ath0: <Atheros 9280> mem 0xd0400000-0xd040ffff at device 0.0 on pci3
Dec 27 06:37:03 lumiwa kernel: ath0: [HT] enabling HT modes
Dec 27 06:37:03 lumiwa kernel: ath0: [HT] 1 stream STBC receive enabled
Dec 27 06:37:03 lumiwa kernel: ath0: [HT] 1 stream STBC transmit enabled
Dec 27 06:37:03 lumiwa kernel: ath0: [HT] 2 RX streams; 2 TX streams
Dec 27 06:37:03 lumiwa kernel: ath0: AR9280 mac 128.2 RF5133 phy 13.0
Dec 27 06:37:03 lumiwa kernel: ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
Dec 27 06:37:03 lumiwa kernel: pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
Dec 27 06:37:03 lumiwa kernel: pcib4: [GIANT-LOCKED]
Dec 27 06:37:03 lumiwa kernel: pci4: <ACPI PCI bus> on pcib4
Dec 27 06:37:03 lumiwa kernel: pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4
Dec 27 06:37:03 lumiwa kernel: pci5: <ACPI PCI bus> on pcib5
Dec 27 06:37:03 lumiwa kernel: fwohci0: <1394 Open Host Controller Interface> mem 0xd0304000-0xd03047ff,0xd0300000-0xd0303fff at device 0.0 on pci5
Dec 27 06:37:03 lumiwa kernel: fwohci0: OHCI version 1.10 (ROM=0)
Dec 27 06:37:03 lumiwa kernel: fwohci0: No. of Isochronous channels is 8.
Dec 27 06:37:03 lumiwa kernel: fwohci0: EUI64 d4:9a:20:ff:fe:cd:f9:52
Dec 27 06:37:03 lumiwa kernel: fwohci0: invalid speed 7 (fixed to 3).
Dec 27 06:37:03 lumiwa kernel: fwohci0: Phy 1394a available S800, 3 ports.
Dec 27 06:37:03 lumiwa kernel: fwohci0: Link S800, max_rec 4096 bytes.
Dec 27 06:37:03 lumiwa kernel: fwohci0: phy int
Dec 27 06:37:03 lumiwa kernel: firewire0: <IEEE1394(FireWire) bus> on fwohci0
Dec 27 06:37:03 lumiwa kernel: sbp0: <SBP-2/SCSI over FireWire> on firewire0
Dec 27 06:37:03 lumiwa kernel: fwohci0: Initiate bus reset
Dec 27 06:37:03 lumiwa kernel: fwohci0: fwohci_intr_core: BUS reset
Dec 27 06:37:03 lumiwa kernel: fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB
Dec 27 06:37:03 lumiwa kernel: fwohci0: PhysicalUpperBound = 0x00000000
Dec 27 06:37:03 lumiwa kernel: fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
Dec 27 06:37:03 lumiwa kernel: firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
Dec 27 06:37:03 lumiwa kernel: firewire0: bus manager 0
Dec 27 06:37:03 lumiwa kernel: pcib6: <ACPI PCI-PCI bridge> at device 28.3 on pci0
Dec 27 06:37:03 lumiwa kernel: pcib6: [GIANT-LOCKED]
Dec 27 06:37:03 lumiwa kernel: pcib7: <PCI-PCI bridge> at device 28.4 on pci0
Dec 27 06:37:03 lumiwa kernel: pcib7: [GIANT-LOCKED]
Dec 27 06:37:03 lumiwa kernel: uhci1: <UHCI (generic) USB controller> port 0x3040-0x305f at device 29.0 on pci0
Dec 27 06:37:03 lumiwa kernel: uhci1: LegSup = 0x2400
Dec 27 06:37:03 lumiwa kernel: usbus2 on uhci1
Dec 27 06:37:03 lumiwa kernel: usbus2: 12Mbps Full Speed USB v1.0
Dec 27 06:37:03 lumiwa kernel: ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xd0705800-0xd0705bff at device 29.7 on pci0
Dec 27 06:37:03 lumiwa kernel: usbus3: EHCI version 1.0
Dec 27 06:37:03 lumiwa kernel: usbus3 on ehci1
Dec 27 06:37:03 lumiwa kernel: usbus3: 480Mbps High Speed USB v2.0
Dec 27 06:37:03 lumiwa kernel: pcib8: <PCI-PCI bridge> at device 30.0 on pci0
Dec 27 06:37:03 lumiwa kernel: pci6: <PCI bus> on pcib8
Dec 27 06:37:03 lumiwa kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Dec 27 06:37:03 lumiwa kernel: isa0: <ISA bus> on isab0
Dec 27 06:37:03 lumiwa kernel: ahci0: <Intel Ibex Peak AHCI SATA controller> port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3020-0x303f mem 0xd0705000-0xd07057ff at device 31.2 on pci0
Dec 27 06:37:03 lumiwa kernel: ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
Dec 27 06:37:03 lumiwa kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
Dec 27 06:37:03 lumiwa kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
Dec 27 06:37:03 lumiwa kernel: ahciem0: <AHCI enclosure management bridge> on ahci0
Dec 27 06:37:03 lumiwa kernel: acpi_button0: <Power Button> on acpi0
Dec 27 06:37:03 lumiwa kernel: acpi_button1: <Sleep Button> on acpi0
Dec 27 06:37:03 lumiwa kernel: pcib9: <ACPI Host-PCI bridge> on acpi0
Dec 27 06:37:03 lumiwa kernel: pci7: <ACPI PCI bus> on pcib9
Dec 27 06:37:03 lumiwa kernel: coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Dec 27 06:37:03 lumiwa kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
Dec 27 06:37:03 lumiwa kernel: Timecounters tick every 1.000 msec
Dec 27 06:37:03 lumiwa kernel: hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
Dec 27 06:37:03 lumiwa kernel: hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
Dec 27 06:37:03 lumiwa kernel: pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
Dec 27 06:37:03 lumiwa kernel: hdacc1: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac1
Dec 27 06:37:03 lumiwa kernel: hdaa1: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc1
Dec 27 06:37:03 lumiwa kernel: pcm1: <Cirrus Logic CS4206 (Analog 6ch/2.0)> at nid 9,10,11 and 13 on hdaa1
Dec 27 06:37:03 lumiwa kernel: pcm2: <Cirrus Logic CS4206 (Rear Analog Line-in)> at nid 12 on hdaa1
Dec 27 06:37:03 lumiwa kernel: pcm3: <Cirrus Logic CS4206 (Rear Digital)> at nid 16 and 15 on hdaa1
Dec 27 06:37:03 lumiwa kernel: ugen1.1: <Intel EHCI root HUB> at usbus1
Dec 27 06:37:03 lumiwa kernel: ugen0.1: <Intel UHCI root HUB> at usbus0
Dec 27 06:37:03 lumiwa kernel: ugen3.1: <Intel EHCI root HUB> at usbus3
Dec 27 06:37:03 lumiwa kernel: ugen2.1: <Intel UHCI root HUB> at usbus2
Dec 27 06:37:03 lumiwa kernel: uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Dec 27 06:37:03 lumiwa kernel: uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Dec 27 06:37:03 lumiwa kernel: uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Dec 27 06:37:03 lumiwa kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Dec 27 06:37:03 lumiwa kernel: uhub3: 2 ports with 2 removable, self powered
Dec 27 06:37:03 lumiwa kernel: uhub1: 2 ports with 2 removable, self powered
Dec 27 06:37:03 lumiwa kernel: uhub0: 6 ports with 6 removable, self powered
Dec 27 06:37:03 lumiwa kernel: bge0: link state changed to UP
Dec 27 06:37:03 lumiwa kernel: uhub2: 8 ports with 8 removable, self powered
Dec 27 06:37:03 lumiwa kernel: ugen1.2: <vendor 0x0424 product 0x2514> at usbus1
Dec 27 06:37:03 lumiwa kernel: uhub4 on uhub0
Dec 27 06:37:03 lumiwa kernel: uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.03, addr 2> on usbus1
Dec 27 06:37:03 lumiwa kernel: uhub4: MTT enabled
Dec 27 06:37:03 lumiwa kernel: ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
Dec 27 06:37:03 lumiwa kernel: ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
Dec 27 06:37:03 lumiwa kernel: ses0: SEMB SES Device
Dec 27 06:37:03 lumiwa kernel: cd0 at ahcich1 bus 0 scbus2 target 0 lun 0
Dec 27 06:37:03 lumiwa kernel: cd0: <OPTIARC DVD RW AD-5680H 3AHB> Removable CD-ROM SCSI device
Dec 27 06:37:03 lumiwa kernel: cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
Dec 27 06:37:03 lumiwa kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present
Dec 27 06:37:03 lumiwa kernel: ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
Dec 27 06:37:03 lumiwa kernel: ada0: <Mercury Electra 3G SSD R0522A0> ACS-2 ATA SATA 2.x device
Dec 27 06:37:03 lumiwa kernel: ada0: Serial Number OW181126100473DEA
Dec 27 06:37:03 lumiwa kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
Dec 27 06:37:03 lumiwa kernel: ada0: Command Queueing enabled
Dec 27 06:37:03 lumiwa kernel: ada0: 476940MB (976773168 512 byte sectors)
Dec 27 06:37:03 lumiwa kernel: Trying to mount root from ufs:/dev/ada0p2 [rw]...
Dec 27 06:37:03 lumiwa kernel: GEOM_ELI: Device ada0p3.eli created.
Dec 27 06:37:03 lumiwa kernel: GEOM_ELI: Encryption: AES-XTS 128
Dec 27 06:37:03 lumiwa kernel: GEOM_ELI: Crypto: software
Dec 27 06:37:03 lumiwa kernel: uhub4: 4 ports with 2 removable, self powered
Dec 27 06:37:03 lumiwa kernel: ugen3.2: <vendor 0x0424 product 0x2514> at usbus3
Dec 27 06:37:03 lumiwa kernel: uhub5 on uhub2
Dec 27 06:37:03 lumiwa kernel: uhub5: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.03, addr 2> on usbus3
Dec 27 06:37:03 lumiwa kernel: uhub5: MTT enabled
Dec 27 06:37:03 lumiwa kernel: lo0: link state changed to UP
Dec 27 06:37:03 lumiwa kernel: bge0: link state changed to DOWN
Dec 27 06:37:03 lumiwa kernel: ugen1.3: <Apple Inc. BRCM2046 Hub> at usbus1
Dec 27 06:37:03 lumiwa kernel: uhub6 on uhub4
Dec 27 06:37:03 lumiwa kernel: uhub6: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus1
Dec 27 06:37:03 lumiwa kernel: uhub5: 4 ports with 2 removable, self powered
Dec 27 06:37:03 lumiwa kernel: uhub6: 3 ports with 0 removable, self powered
Dec 27 06:37:03 lumiwa kernel: ugen3.3: <Apple Inc. Built-in iSight> at usbus3
Dec 27 06:37:03 lumiwa kernel: ugen1.4: <Apple Inc. Bluetooth USB Host Controller> at usbus1
Dec 27 06:37:03 lumiwa kernel: ugen3.4: <Apple Computer, Inc. IR Receiver> at usbus3
Dec 27 06:37:03 lumiwa kernel: ugen1.5: <Apple Card Reader> at usbus1
Dec 27 06:37:03 lumiwa kernel: umass0 on uhub4
Dec 27 06:37:03 lumiwa kernel: umass0: <Apple Card Reader, class 0/0, rev 2.00/98.33, addr 5> on usbus1
Dec 27 06:37:03 lumiwa kernel: umass0: SCSI over Bulk-Only; quirks = 0x4000
Dec 27 06:37:03 lumiwa kernel: umass0:4:0: Attached to scbus4
Dec 27 06:37:03 lumiwa kernel: da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
Dec 27 06:37:03 lumiwa kernel: da0: <APPLE SD Card Reader 1.00> Removable Direct Access SCSI device
Dec 27 06:37:03 lumiwa kernel: da0: Serial Number 000000009833
Dec 27 06:37:03 lumiwa kernel: da0: 40.000MB/s transfers
Dec 27 06:37:03 lumiwa kernel: da0: Attempt to query device size failed: NOT READY, Medium not present
Dec 27 06:37:03 lumiwa kernel: da0: quirks=0x2<NO_6_BYTE>
Dec 27 06:37:03 lumiwa kernel: ugen3.5: <vendor 0x04d9 product 0x1400> at usbus3
Dec 27 06:37:03 lumiwa kernel: ukbd0 on uhub5
Dec 27 06:37:03 lumiwa kernel: ukbd0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 5> on usbus3
Dec 27 06:37:03 lumiwa kernel: kbd1 at ukbd0
Dec 27 06:37:03 lumiwa kernel: bge0: link state changed to UP
Dec 27 06:37:03 lumiwa kernel: ubt0 on uhub6
Dec 27 06:37:03 lumiwa kernel: ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/2.06, addr 4> on usbus1
Dec 27 06:37:03 lumiwa kernel: uhid0 on uhub5
Dec 27 06:37:03 lumiwa kernel: uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 4> on usbus3
Dec 27 06:37:03 lumiwa kernel: ums0 on uhub5
Dec 27 06:37:03 lumiwa kernel: ums0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 5> on usbus3
Dec 27 06:37:03 lumiwa kernel: WARNING: attempt to domain_add(bluetooth) after domainfinalize()
Dec 27 06:37:03 lumiwa kernel: ums0: 5 buttons and [XYZ] coordinates ID=1
Dec 27 06:37:03 lumiwa kernel: WARNING: attempt to domain_add(netgraph) after domainfinalize()
Dec 27 06:37:03 lumiwa kernel: ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
Dec 27 06:37:10 lumiwa kernel: Security policy loaded: MAC/ntpd (mac_ntpd)
Dec 27 06:37:10 lumiwa ntpd[43451]: ntpd 4.2.8p12-a (1): Starting
Dec 27 06:37:10 lumiwa ntpd[43822]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): good hash signature
Dec 27 06:37:10 lumiwa ntpd[43822]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): loaded, expire=2019-06-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Dec 27 06:37:11 lumiwa dbus[35292]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Dec 27 06:37:11 lumiwa dbus[35292]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Dec 27 06:38:36 lumiwa login[70080]: ROOT LOGIN (root) ON ttyv1
Dec 27 06:39:32 lumiwa bthidd[38325]: Accepted control connection from 7c:d1:c3:69:8b:67
Dec 27 06:39:32 lumiwa bthidd[38325]: Accepted interrupt connection from 7c:d1:c3:69:8b:67
--MP_/qf4H=dstXmmfGC_TN7_Td/V--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20181227065419.679201d8>