Date: Thu, 28 Aug 2003 14:21:46 +0800 (CST) From: Tai-hwa Liang <avatar@mmlab.cse.yzu.edu.tw> To: freebsd-mobile@freebsd.org Subject: O2Micro 6912, wi0: watchdog timeout Message-ID: <030828141924D.79377@www.mmlab.cse.yzu.edu.tw>
next in thread | raw e-mail | index | archive | help
Greetings,
This laptop(Twinhead efio!2412FTZ) uses O2Micro 6912 PCI-Cardbus
bridge controller. It appears like that the internal mini-PCI wireless
card will be identified at PCMCIA slot 1.
I have tested three different wireless cards, two of them are
mini-PCI, Agere(Lucent/Orinoco) based, the remaining one is Intersil
based PCMCIA card. All of them works like a charm under Linux 2.4.20(w/
or w/o pcmcia-cs package), with orinoco_cs, orinoco and hermes kernel
modules. However, they don't work under FreeBSD:
* The PCMCIA one just freeze the OS after it was inserted. The
box still respond to ping packet; however, an already logged
on session just stop responding.
BTW, this card works perfectly with if_wi module on another
laptop:
wi0 at port 0x240-0x27f irq 10 slot 0 on pccard0
pcic: I/O win 0 flags 15 240-27f
wi0: 802.11 address: xx:xx:xx:xx:xx:xx
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash
wi0: Intersil Firmware: Primary 0.03.00, Station 0.08.03
wi0: wi_has_wep = 1
I also tried to remove the internal mini-PCI wireless card before
inserting the PCMCIA one. It still froze after the card was
inserted.
* The one identified as "Wireless Embedded Card Model 0504"
under WindozeXP can not even be probed after the system is
booted.
* The one identified as "Orinoco Wireless Card" under WindozeXP
was not able to associate with AP. Following are related
information when this miniPCI card is attached to the box.
The tree is cvsupped from Aug-27-2003 source; after reboot, the
"ifconfig wi0" always returns "status: no carrier" and an empty ssid:
wi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether yy:yy:yy:yy:yy:yy
media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps)
status: no carrier
ssid "" 1:""
stationname "FreeBSD WaveLAN/IEEE node"
channel 1 authmode OPEN powersavemode OFF powersavesleep 100
wepmode OFF weptxkey 1
After assign the ssid manually, the status changed to "assoicated;"
however, a "dhclient wi0" only returns "wi0: watchdog timeout" in system
log.
wi0: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether yy:yy:yy:yy:yy:yy
media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps)
status: associated
ssid hello 1:hello
stationname "FreeBSD WaveLAN/IEEE node"
channel 6 authmode OPEN powersavemode OFF powersavesleep 100
wepmode OFF weptxkey 1
According to pcic(4), O2 Micro chips seems some sort of "broken"
under most circumstances:
"O2 Micro chips may be poorly supported because the author
does not have good access to machines with one of these
bridges in it."
I've tried to use different combination such like
hw.pcic.ignore_function_1=[0|1], hw.pcic.init_routing=[0|1] and
hw.pcic.instr_path=[1|2]; however, still no luck....
I'm wondering if there's any knobs available to tweak or I just
missed something?
-------- loader.conf --------
# -- sysinstall generated deltas -- #
userconfig_script_load="YES"
autoboot_delay="1"
boot_verbose="YES"
#hw.pcic.ignore_function_1=1
#hw.pcic.init_routing=1
hw.pcic.intr_path=2
machdep.pccard.mem_start="0xd8000"
if_wi_load="YES"
-------- pir dump --------
$PIR table at 0x28117de0 version 1.0
PCI interrupt router at 0:0.8 vendor 0x1039 device 0x8
PCI-only interrupts [ ]
entry bus slot device
00: 00 00 01 INTA 41 [ 3 4 5 6 7 9 10 11 12 14 15]
INTB 42 [ 3 4 5 6 7 9 10 11 12 14 15]
INTC 43 [ 3 4 5 6 7 9 10 11 12 14 15]
INTD 44 [ 3 4 5 6 7 9 10 11 12 14 15]
01: 00 00 02 INTA 41 [ 3 4 5 6 7 9 10 11 12 14 15]
INTB 42 [ 3 4 5 6 7 9 10 11 12 14 15]
INTC 43 [ 3 4 5 6 7 9 10 11 12 14 15]
INTD 44 [ 3 4 5 6 7 9 10 11 12 14 15]
02: 00 00 03 INTA 43 [ 3 4 5 6 7 9 10 11 12 14 15]
INTB 00 [ ]
INTC 00 [ ]
INTD 00 [ ]
03: 00 00 10 INTA 43 [ 3 4 5 6 7 9 10 11 12 ]
INTB 00 [ ]
INTC 00 [ ]
INTD 00 [ ]
04: 00 00 09 INTA 41 [ 3 4 5 6 7 9 10 11 12 ]
INTB 42 [ 3 4 5 6 7 9 10 11 12 ]
INTC 00 [ ]
INTD 00 [ ]
-------- pciconf -lv --------
agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x06301039 rev=0x31 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS630 Host-to-PCI Bridge'
class = bridge
subclass = HOST-PCI
atapci0@pci0:0:1: class=0x010180 card=0x120114ff chip=0x55131039 rev=0xd0 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS5513 EIDE Controller (A,B step)'
class = mass storage
subclass = ATA
isab0@pci0:1:0: class=0x060100 card=0x00000000 chip=0x00081039 rev=0x00 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS85C503/5513 PCI to ISA Bridge (LPC Bridge)'
class = bridge
subclass = PCI-ISA
sis0@pci0:1:1: class=0x020000 card=0x020114ff chip=0x09001039 rev=0x82 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS900 Fast Ethernet/Home Networking Ctrlr'
class = network
subclass = ethernet
ohci0@pci0:1:2: class=0x0c0310 card=0x70011039 chip=0x70011039 rev=0x07 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS5597/8 Universal Serial Bus Controller'
class = serial bus
subclass = USB
ohci1@pci0:1:3: class=0x0c0310 card=0x70001039 chip=0x70011039 rev=0x07 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS5597/8 Universal Serial Bus Controller'
class = serial bus
subclass = USB
pcm0@pci0:1:4: class=0x040100 card=0x040114ff chip=0x70181039 rev=0x02 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS7018 PCI Audio Accelerator'
class = multimedia
subclass = audio
none0@pci0:1:6: class=0x070300 card=0x100114ff chip=0x70131039 rev=0xa0 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS7013 56k Modem'
class = simple comms
pcib2@pci0:2:0: class=0x060400 card=0x00000000 chip=0x00011039 rev=0x00 hdr=0x01
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS 530 Virtual PCI-to-PCI bridge (AGP)'
class = bridge
subclass = PCI-PCI
pcic0@pci0:3:0: class=0x060700 card=0x060114ff chip=0x69721217 rev=0x00 hdr=0x02
vendor = 'O2 Micro Inc'
device = 'OZ6912 CardBus Controller'
class = bridge
subclass = PCI-CardBus
pcic1@pci0:9:0: class=0x060700 card=0x050014ff chip=0xac50104c rev=0x01 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1410 PC card cardBus Controller'
class = bridge
subclass = PCI-CardBus
none1@pci0:10:0: class=0x0c0010 card=0xc70314ff chip=0x581111c1 rev=0x04 hdr=0x00
vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
device = 'FW322/323 1394A PCI PHY/Link Open Host Ctrlr I/F'
class = serial bus
subclass = FireWire
none2@pci1:0:0: class=0x030000 card=0x030314ff chip=0x63001039 rev=0x31 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS630/730 GUI Accelerator+3D'
class = display
subclass = VGA
-------- pccardc dumpcis --------
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4
000: 67 5a 08 ff
Attribute memory device information:
Device number 1, type SRAM, WPS = OFF
Speed = 5.0 x 100 ns, Memory block size = 512b, 2 units
Tuple #3, code = 0x1c (Other conditions for common memory), length = 4
000: 02 00 00 ff
(3V card)
Tuple #4, code = 0x1d (Other conditions for attribute memory), length = 5
000: 03 67 5a 08 ff
(MWAIT) (3V card)
Tuple #5, code = 0x15 (Version 1 info), length = 80
000: 05 00 4c 75 63 65 6e 74 20 54 65 63 68 6e 6f 6c
010: 6f 67 69 65 73 00 57 61 76 65 4c 41 4e 2f 49 45
020: 45 45 00 56 65 72 73 69 6f 6e 20 30 31 2e 30 31
030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
Version = 5.0, Manuf = [Lucent Technologies], card vers = [WaveLAN/IEEE]
Addit. info = [Version 01.01],[]
Tuple #6, code = 0x20 (Manufacturer ID), length = 4
000: 56 01 02 00
PCMCIA ID = 0x156, OEM ID = 0x2
Tuple #7, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #8, code = 0x22 (Functional EXT), length = 2
000: 01 07
Network technology: Wireless
Tuple #9, code = 0x22 (Functional EXT), length = 5
000: 02 40 42 0f 00
Network speed: 1 Mb/sec
Tuple #10, code = 0x22 (Functional EXT), length = 5
000: 02 80 84 1e 00
Network speed: 2 Mb/sec
Tuple #11, code = 0x22 (Functional EXT), length = 5
000: 02 60 ec 53 00
Network speed: 5 Mb/sec
Tuple #12, code = 0x22 (Functional EXT), length = 5
000: 02 c0 d8 a7 00
Network speed: 11 Mb/sec
Tuple #13, code = 0x22 (Functional EXT), length = 2
000: 03 07
Network media: 2.4 GHz
Tuple #14, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 02 2d 84 f1 f3
Network node ID: 00 02 2d 84 f1 f3
Tuple #15, code = 0x22 (Functional EXT), length = 2
000: 05 01
Network connector: closed connector standard
Tuple #16, code = 0x1a (Configuration map), length = 7
000: 03 01 e0 03 00 00 01
Reg len = 4, config register addr = 0x3e0, last config = 0x1
Registers: X-------
Tuple #17, code = 0x1b (Configuration entry), length = 16
000: c1 01 19 77 b5 1e 35 b5 3c 36 36 05 46 7f ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 3 x 1V, ext = 0x1e
Minimum operating supply voltage: 3 x 1V
Maximum operating supply voltage: 3 x 1V, ext = 0x3c
Max current average over 1 second: 3 x 100mA
Max current average over 10 ms: 3 x 100mA
Power down supply current: 1 x 10mA
Card decodes 6 address lines, limited 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQs: NMI IOCK BERR VEND 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #18, code = 0xff (Terminator), length = 0
2 slots found
-------- dmesg.boot --------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-20030828-PRERELEASE #0
Calibrating clock(s) ... TSC clock: 1199992146 Hz, i8254 clock: 1193132 Hz
Timecounter "i8254" frequency 1193132 Hz
CPU: Mobile Intel(R) Celeron(TM) CPU 1200MHz (1199.99-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 125763584 (122816K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009efff, 647168 bytes (158 pages)
0x00035d000 - 0x0077e5fff, 122195968 bytes (29833 pages)
avail memory = 118894592 (116108K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb30
bios32: Entry = 0xfdb40 (c00fdb40) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb61
pnpbios: Found PnP BIOS data at 0xc00f87a0
pnpbios: Entry = f0000:7804 Rev = 1.0
Other BIOS signatures found:
ACPI: 000fd450
Preloaded elf kernel "kernel" at 0xc0336000.
Preloaded elf module "if_wi.ko" at 0xc033609c.
VESA: information block
56 45 53 41 00 03 00 01 00 01 00 00 00 00 22 00
00 01 80 00 00 01 14 01 00 01 46 01 00 01 5a 01
00 01 02 01 01 01 00 01 03 01 04 01 05 01 0d 01
0e 01 10 01 11 01 13 01 14 01 16 01 17 01 32 01
VESA: 25 mode(s) found
VESA: v3.0, 8192k memory, flags:0x0, mode table:0xc02c3262 (1000022)
VESA: SiS
VESA: Silicon Integrated Systems Corp. 630 2.04.50
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010010
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06301039)
Using $PIR table, 5 entries at 0xc00f8de0
pcib-: pcib0 exists, using next available unit number
apm: incorrect signature (0x0)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1039, dev=0x0630, revid=0x31
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x1039, dev=0x5513, revid=0xd0
class=01-01-80, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00007ee0, size 4
found-> vendor=0x1039, dev=0x0008, revid=0x00
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1039, dev=0x0900, revid=0x82
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=11
map[10]: type 1, range 32, base 0000d000, size 8
map[14]: type 1, range 32, base dffc0000, size 12
found-> vendor=0x1039, dev=0x7001, revid=0x07
class=0c-03-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=10
map[10]: type 1, range 32, base dffd0000, size 12
found-> vendor=0x1039, dev=0x7001, revid=0x07
class=0c-03-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=10
map[10]: type 1, range 32, base dffe0000, size 12
found-> vendor=0x1039, dev=0x7018, revid=0x02
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=5
map[10]: type 1, range 32, base 0000d400, size 8
map[14]: type 1, range 32, base dfff0000, size 12
found-> vendor=0x1039, dev=0x7013, revid=0xa0
class=07-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=11
map[10]: type 1, range 32, base 0000dc00, size 8
map[14]: type 1, range 32, base 0000d800, size 7
found-> vendor=0x1039, dev=0x0001, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1217, dev=0x6972, revid=0x00
class=06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
found-> vendor=0x104c, dev=0xac50, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
found-> vendor=0x11c1, dev=0x5811, revid=0x04
class=0c-00-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base dff80000, size 12
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
atapci0: <SiS 5591 ATA100 controller> port 0x7ee0-0x7eef at device 0.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x7ee0
ata0: mask=03 ostat0=50 ostat2=30
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 30 30
ata0: mask=03 stat0=50 stat1=30
ata0-master: ATA 01 a5
ata0-slave: ATA 25 25
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x7ee8
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xd000-0xd0ff mem 0xdffc0000-0xdffc0fff irq 11 at device 1.1 on pci0
sis0: Ethernet address: zz:zz:zz:zz:zz:zz
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00057d, model 0x0004, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: sis0 attached
pci0: <OHCI USB controller> (vendor=0x1039, dev=0x7001) at 1.2 irq 10
pci0: <OHCI USB controller> (vendor=0x1039, dev=0x7001) at 1.3 irq 10
pcm0: <SiS 7018> port 0xd400-0xd4ff mem 0xdfff0000-0xdfff0fff irq 5 at device 1.4 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features AMAP
pcm0: sndbuf_setmap 73b3000, 1000; 0xc0969000 -> 73b3000
pcm0: sndbuf_setmap 73b6000, 1000; 0xc096c000 -> 73b6000
pcm0: sndbuf_setmap 73b8000, 1000; 0xc096e000 -> 73b8000
pcm0: sndbuf_setmap 73bb000, 1000; 0xc0971000 -> 73bb000
pcm0: sndbuf_setmap 73bd000, 1000; 0xc0973000 -> 73bd000
pci0: <unknown card> (vendor=0x1039, dev=0x7013) at 1.6 irq 11
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0
found-> vendor=0x1039, dev=0x6300, revid=0x31
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d0000000, size 27
map[14]: type 1, range 32, base dfee0000, size 17
map[18]: type 1, range 32, base 0000ac80, size 7
pci1: <PCI bus> on pcib2
pci1: <SiS model 6300 VGA-compatible display device> (vendor=0x1039, dev=0x6300) at 0.0
pci_cfgintr_search: linked (43) to configured irq 5 at 0:1:4
pci_cfgintr: 0:3 INTA routed to irq 5
pcic0: <O2micro 6912 PCI-Cardbus Bridge> irq 5 at device 3.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: Warning: O2micro OZ68xx chips may not work
using shared irq5.
pcic0: PCI Configuration space:
0x00: 0x69721217 0x04100007 0x06070000 0x00020000
0x10: 0x88000000 0x020000a0 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000001
0x30: 0x00000001 0x00000001 0x00000001 0x07600105
0x40: 0x060114ff 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x000c1002
0x90: 0x00000002 0x00000000 0x00000000 0x00000000
0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000009
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: ROUTE_INTERRUPT failed.
pcic1: <TI PCI-1410 PCI-CardBus Bridge> at device 9.0 on pci0
pcic1: PCI Memory allocated: 0x88001000
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: ROUTE_INTERRUPT failed.
pcic1: No PCI interrupt routed, trying ISA.
pcic1: Polling mode
pcic1: TI12XX PCI Config Reg: [pwr save][pci only]
pcic1: PCI Configuration space:
0x00: 0xac50104c 0x02100003 0x06070001 0x00020000
0x10: 0x88001000 0x020000a0 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x07e001ff
0x40: 0x050014ff 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449060 0x00000000 0x00000000 0x01000002
0x90: 0x616000c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x0000000e 0x0000001b
0xb0: 0x08000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci0: <unknown card> (vendor=0x11c1, dev=0x5811) at 10.0 irq 11
pci-: pci1 exists, using next available unit number
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
pcic-: pcic0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00006100, flags:00000000, packet size:4
psm0: syncmask:00, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 01 03 00 02 67 64 4f 4f 88 54 9f
c4 1f 00 4f 0d 0e 00 00 07 80 92 89 8f 28 1f 8f
b5 a3 fe 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 00 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 01 03 00 02 67 64 4f 4f 88 54 9f
c4 1f 00 4f 0d 0e 00 00 07 80 92 89 8f 28 1f 8f
b5 a3 fe 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 00 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
pcic2 failed to probe at port 0x3e0-0x3e1 irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: success setting UDMA2 on SiS chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <IC25N040ATMR04-0/MO2OAD0A> ATA-6 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=5 cblid=0
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <QSI DVD-ROM SDR-081/ETC6> DVD-ROM drive at ata1 as master
acd0: read 4125KB/s (32015KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s4a
ad0s1: type 0xc, start 9253503, end = 39969719, size 30716217 : OK
ad0s2: type 0xf, start 39969720, end = 78140159, size 38170440 : OK
ad0s3: type 0x83, start 63, end = 5044409, size 5044347 : OK
ad0s4: type 0xa5, start 5044410, end = 9253439, size 4209030 : OK
ad0s5: type 0xb, start 39969783, end = 77610014, size 37640232
ad0s5: C/H/S start 1023/1/1 (16434558) != start 39969783: invalid
ad0<extended>: type 0x5, start 77610015, end = 78140159, size 530145
ad0<extended>: C/H/S start 1023/0/1 (16434495) != start 77610015: invalid
ad0s6: type 0x82, start 77610078, end = 78140159, size 530082
ad0s6: C/H/S start 1023/1/1 (16434558) != start 77610078: invalid
pcic1: Autodetected 3.3V card
pccard: card inserted, slot 1
pcic1: reset 1 int is 0 stat is 4f
start_init: trying /sbin/init
pcic1: reset 2 int is 60 stat is 4f
pcic1: reset 3 int is 60 stat is 6f
pccard1: Assigning wi0: io 0x240-0x27f irq 3 flags 0x0
pcic: I/O win 0 flags 15 240-27f
pcic: I/O win 0 flags 5 240-27f
wi0 at port 0x240-0x27f irq 3 slot 1 on pccard1
pcic: I/O win 0 flags 15 240-27f
wi0: 802.11 address: yy:yy:yy:yy:yy:yy
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station 6.16.01
wi0: wi_has_wep = 1
bpf: wi0 attached
ohci0: <SiS 5571 USB controller> mem 0xdffd0000-0xdffd0fff irq 10 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xdffe0000-0xdffe0fff irq 10 at
device 1.3
on pci0
using shared irq10.
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?030828141924D.79377>