Date: Wed, 30 Nov 2005 21:17:19 +0100 From: Lucas Fol <lllfff@gmail.com> To: freebsd-questions@FreeBSD.org Subject: Problem with printing-scanning..combo.. Message-ID: <1133381839.1099.8.camel@lucas>
next in thread | raw e-mail | index | archive | help
Welcome
I own a HP PSC 1610 all-in-one. I've plugged it (USB) to my notebook
(Acer TM 212 TX). The printing stuff goes ok. It prints well with cups
and ulpt driver. The problem is with scanning. The BSD doesn't see the
scanner. sane-find-scanner can't do do it. The uscanner module is
compiled in kernel. That's the 6.0 Release of FreeBSD. I've tried to
solve it for whole three days and i still don't get it.
That's my dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-RELEASE #0: Sun Nov 27 17:33:48 CET 2005
lucas@lucas:/usr/src/sys/i386/compile/A-GENERIC
module nfslock already present!
module_register: module uhub/uhid already exists!
Module uhub/uhid failed to register: 17
module_register: module pci/rl already exists!
Module pci/rl failed to register: 17
module_register: module cardbus/rl already exists!
Module cardbus/rl failed to register: 17
module_register: module rl/miibus already exists!
Module rl/miibus failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (797.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 259981312 (247 MB)
avail memory = 240738304 (229 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Acer FALCON2M> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link PILA> irq 11 on acpi0
pci_link1: <ACPI PCI Link PILB> irq 11 on acpi0
pci_link2: <ACPI PCI Link PILC> irq 10 on acpi0
pci_link3: <ACPI PCI Link PILD> irq 11 on acpi0
pci_link4: <ACPI PCI Link PILE> on acpi0
pci_link5: <ACPI PCI Link PILF> on acpi0
pci_link6: <ACPI PCI Link PILG> irq 10 on acpi0
pci_link7: <ACPI PCI Link PILH> irq 10 on acpi0
pci_link8: <ACPI PCI Link PILI> irq 11 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x22> port 0x62,0x66 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf108-0xf10b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.16.INTAagp0: <Ali M1621 host to AGP bridge>
mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcm0: <Acer Labs M5451> port 0x8000-0x80ff mem 0x81a00000-0x81a00fff irq
10 at device 6.0 on pci0
pcm0: <Cirrus Logic CS4299 AC97 Codec>
pcm0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AcerLabs M5229 UDMA66 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x7050-0x705f irq 15 at device 16.0
on pci0
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA
access bug, expect reduced performance
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 17.0 (no driver attached)
cbb0: <O2Micro OZ6812/6872 PCI-CardBus Bridge> irq 11 at device 19.0 on
pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0x81c00000-0x81c00fff irq 11 at device 20.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ulpt0: HP PSC 1600 series, rev 2.00/1.00, addr 2, iclass 255/204
ulpt0: using bi-directional mode
umass0: HP PSC 1600 series, rev 2.00/1.00, addr 2
Timecounter "TSC" frequency 797050193 Hz quality 800
Timecounters tick every 1.000 msec
rl0: <RealTek 8139 10/100BaseTX> port 0x1100-0x11ff mem
0x88000000-0x880001ff irq 11 at device 0.0 on cardbus0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:fc:b9:8a:30
ad0: 9590MB <TOSHIBA MK1016GAP U1.14 A> at ata0-master UDMA66
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4241N/0H33> at ata1-slave UDMA33
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
cd0 at ata1 bus 0 target 1 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4241N 0H33> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [80250 x 2048 byte records]
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <HP PSC 1610 1.00> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
(cd0:ata1:0:1:0): CAM Status: SCSI Status Error
(cd0:ata1:0:1:0): SCSI Status: Check Condition
(cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:1:0): Illegal mode for this track
(cd0:ata1:0:1:0): Unretryable error
(cd0:ata1:0:1:0): cddone: got error 0x6 back
(cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0
(cd0:ata1:0:1:0): CAM Status: SCSI Status Error
(cd0:ata1:0:1:0): SCSI Status: Check Condition
(cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:1:0): Illegal mode for this track
(cd0:ata1:0:1:0): Unretryable error
(cd0:ata1:0:1:0): cddone: got error 0x6 back
(cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
(cd0:ata1:0:1:0): CAM Status: SCSI Status Error
(cd0:ata1:0:1:0): SCSI Status: Check Condition
(cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:1:0): Illegal mode for this track
(cd0:ata1:0:1:0): Unretryable error
(cd0:ata1:0:1:0): cddone: got error 0x6 back
(cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0
(cd0:ata1:0:1:0): CAM Status: SCSI Status Error
(cd0:ata1:0:1:0): SCSI Status: Check Condition
(cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0
(cd0:ata1:0:1:0): Illegal mode for this track
(cd0:ata1:0:1:0): Unretryable error
(cd0:ata1:0:1:0): cddone: got error 0x6 back
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
Trying to mount root from ufs:/dev/ad0s1a
Maybe the scanner is wrongfully attached? I don't know.
I would really appreciate if you help me .
Łukasz Foluśniak
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1133381839.1099.8.camel>