Date: Wed, 11 Feb 2009 23:32:08 +1300 From: Mark Kirkwood <markir@paradise.net.nz> To: Oliver Fromme <olli@lurza.secnetix.de> Cc: freebsd-hardware@freebsd.org Subject: Re: SATA PCI adapter recommendation Message-ID: <4992A928.6080308@paradise.net.nz> In-Reply-To: <200902110833.n1B8XbLo096837@lurza.secnetix.de> References: <200902110833.n1B8XbLo096837@lurza.secnetix.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Oliver Fromme wrote: > Hi, > > I plan to put a SATA drive in an old PATA-only PC, so I'm > looking for an appropriate adapter card. A cheap card > should suffice, I do not need RAID, and it does not have > to be SATA-300. (This machine has only standard PCI slots > anyway, so it wouldn't be able to saturate SATA-300.) > > I'm currently looking at these, all of which are about > 20 Euro around here: > > 1. Based on Silicon Image Sil-3x12 chip: > http://www.digital-data.de/download/datasheets/111816_Datasheet.pdf > > 2. Based on Initio INIC1620 chip: > http://www.digital-data.de/download/datasheets/111817_Datasheet.pdf > > 3. Some VIA chip (probably VT6421A, but not 100% clear): > http://www.delock.de/view/pdf/70156/A/1943/ > > I've read a few scary things about SIL chips on the lists, > so I guess I'd better try to avoid that one. > But how about the Initio and VIA ones? Do they work well > with FreeBSD? Any good or bad experiences? > > Finally, a small question: I assume that all of those > SATA controllers do have their own BIOS, so I can boot > from them, right? It would be annoying to have to keep > an old PATA disk in that box just to be able to boot. > > I'd forget those and buy a 3ware card - supported and reliable. Possibly a little more expensive... but they are available 2nd hand on ebay, which should help: http://cgi.ebay.com/hardware-raid-card-3ware-8006-2LP-2-port-SATA-RAID_W0QQitemZ140300178432QQcmdZViewItemQQptZPCC_Drives_Storage_Internal?hash=item140300178432&_trksid=p3286.c0.m14&_trkparms=72%3A1234|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A0|293%3A1|294%3A50 regards Mark
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4992A928.6080308>