Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 04 Sep 2006 13:57:17 -0700
From:      Sam Leffler <sam@errno.com>
To:        Volker <volker@vwsoft.com>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: missed hostapd / ath MFC warning?
Message-ID:  <44FC932D.1090101@errno.com>
In-Reply-To: <44FC789D.4010302@vwsoft.com>
References:  <44FC789D.4010302@vwsoft.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Volker wrote:
> Hi folks,
> 
> I've recently (september 3rd) csup'ed RELENG_6 and made a
> buildkernel && buildworld process.
> 
> After the reboot hostapd doesn't work as expected. Did I miss a MFC
> warning for ath / hostapd?
> 
> hostapd just says:
> bellona# hostapd -dd /etc/hostapd.conf
> Configuration file: /etc/hostapd.conf
> bsd_set_iface_flags: dev_up=0
> bsd_get_ssid: ssid="vtec"
> Using interface ath0 with hwaddr 00:09:5b:89:7d:1f and ssid 'vtec'
> bsd_set_ieee8021x: enabled=1
> bsd_configure_wpa: group key cipher=TKIP (1)
> bsd_configure_wpa: pairwise key ciphers=0x2
> bsd_configure_wpa: key management algorithms=0x2
> bsd_configure_wpa: rsn capabilities=0x0
> bsd_configure_wpa: enable WPA= 0x1
> bsd_set_iface_flags: dev_up=1
> bsd_set_privacy: enabled=1
> WPA: group state machine entering state GTK_INIT
> GMK - hexdump(len=32): 33 e9 d7 a0 86 d2 4f 23 5b a8 21 f7 ed ef cf
> 57 ae 2b 29 5e 8e 5e 91 a8 92 9b 0b dd fa 10 28 ac
> GTK - hexdump(len=32): 8e 9c 18 a4 59 ca 79 bc 04 01 9f e2 82 a5 5b
> 17 94 d7 fd e8 e2 7e 65 30 bf de 9b 5f 9b 72 b3 f5
> WPA: group state machine entering state SETKEYSDONE
> bsd_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1
> Flushing old station entries
> bsd_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3
> Deauthenticate all stations
> 
> .....and all looks fine.
> 
> ifconfig ath0 says:
> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2290
>         ether 00:09:5b:89:7d:1f
>         media: IEEE 802.11 Wireless Ethernet autoselect
>         status: no carrier
>         ssid vtec channel 9
>         authmode WPA privacy MIXED deftxkey 2 TKIP 2:128-bit TKIP
> 3:128-bit
>         txpowmax 30 bmiss 7 protmode CTS burst bintval 100
> 
> I just get a 'no carrier' and so no client system is able to see the
> AP. There's no configuration change just a recently csup'ed and
> rebuild system.
> 
> Is there something I've overseen?

ath0 is not set in hostap mode.

	Sam



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44FC932D.1090101>