Date: 03 Nov 2002 01:19:57 +0100 From: Frode Nordahl <frode@nordahl.net> To: "M. Warner Losh" <imp@bsdimp.com> Cc: freebsd-current@FreeBSD.ORG Subject: Re: CNet CNWLC-811 (PRISM2), kernel panic Message-ID: <1036282799.791.18.camel@samwise.xu.nordahl.net> In-Reply-To: <20021102.161637.10680544.imp@bsdimp.com> References: <1036232462.628.6.camel@samwise.xu.nordahl.net> <20021102.111539.102714390.imp@bsdimp.com> <1036267664.791.13.camel@samwise.xu.nordahl.net> <20021102.161637.10680544.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 2002-11-03 at 00:16, M. Warner Losh wrote:
> pccardc pccard_mem
# pccardc pccardmem
PCCARD Memory address set to 0xd0000
> pccardc pccard_mem 0xf8000000
# pccardc pccardmem 0xf8000000
PCCARD Memory address set to 0xf8000000
> pccardc dumpcis
# pccardc pccardmem
PCCARD Memory address set to 0xf8000000
# pccardc dumpcis
Configuration data for card in slot 1
Tuple #1, code = 0x17 (Attribute memory descriptor), length = 3
000: d9 01 ff
Attribute memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 250nS, Memory block size = 2Kb, 1 units
Tuple #2, code = 0x1d (Other conditions for attribute memory), length =
4
000: 01 d9 01 ff
(MWAIT)
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 00 00 00 00
PCMCIA ID = 0x0, OEM ID = 0x0
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 39
000: 05 00 4f 45 4d 00 31 31 4d 62 70 73 20 57 69 72
010: 65 6c 65 73 73 20 4c 41 4e 20 50 43 20 43 61 72
020: 64 20 56 2d 33 00 ff
Version = 5.0, Manuf = [OEM], card vers = [11Mbps Wireless LAN
PC Card V-3]
Tuple #6, code = 0x1a (Configuration map), length = 6
000: 01 02 00 08 03 ff
Reg len = 2, config register addr = 0x800, last config = 0xff
Registers: XX------ 1 bytes in subtuples
Tuple #7, code = 0x1b (Configuration entry), length = 15
000: c1 81 9d 71 55 2e 2e 2d fc 14 45 10 b8 ff 20
Config index = 0x1(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2.5 x 100mA
Max current average over 10 ms: 2.5 x 100mA
Power down supply current: 2.5 x 10mA
Wait scale Speed = 1.2 x 10 us
Card decodes 5 address lines, limited 8/16 Bit I/O
IRQ modes:
IRQs: 3 4 5 7 8 9 10 11 12 13 14 15
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #8, code = 0xff (Terminator), length = 0
2 slots found
>
> (well, where 0xf8000000 is the same address that NEWCARD reported it
> was using for ccb bridge).
>
> Warner
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1036282799.791.18.camel>