Date: Sat, 19 Jun 2004 20:58:02 +1200 From: Drew Broadley <drew@corrupt.co.nz> To: Drew Broadley <drew@corrupt.co.nz> Cc: mobile@freebsd.org Subject: Re: DWL-660 issues in FreeBSD Message-ID: <40D4001A.9080603@corrupt.co.nz> In-Reply-To: <40D3E33A.3040902@corrupt.co.nz> References: <40D2A263.10602@corrupt.co.nz> <40D3DCDB.2020403@corrupt.co.nz> <40D3E33A.3040902@corrupt.co.nz>
next in thread | previous in thread | raw e-mail | index | archive | help
Drew Broadley wrote: > Drew Broadley wrote: > >> Drew Broadley wrote: >> >>> I have purchased a DWL-660 (seeing it worked in FreeBSD for othe >>> rpeople >>> and uses prism2, which I find out now that they changed it in newer >>> revisions *sigh*) >>> >>> I cannot get a connection to my AP. dstumbler can pick it up and check >>> the signal strength no problems. >>> >>>> ifconfig wi0 up ssid HOME channel 6 >>> >>> >>> >>> >>> Gives me: >>> >>> wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 >>> inet6 fe80::205:5dff:fe24:9617%wi0 prefixlen 64 scopeid 0x4 >>> ether 00:05:5d:24:96:17 >>> media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps) >>> status: no carrier >>> ssid HOME 1:HOME >>> stationname "FreeBSD WaveLAN/IEEE node" >>> channel 6 authmode OPEN powersavemode OFF powersavesleep 100 >>> rtsthreshold 2312 protmode CTS >>> wepmode OFF weptxkey 1 >>> wepkey 1:40-bit wepkey 2:40-bit wepkey 3:40-bit wepkey 4:40-bit >>> >>>>>>>>>>>>>> Note the: status: no carrier >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>> >> I can only get a "state: associated" with "mediaopt monitor" on the >> ifconfig line. >> >> Any ideas anyone ? >> > > dmesg with hw.pccard.debug=1 and hw.pccard.cis_debug=1 > > Jun 19 18:51:52 taz kernel: pccard0: chip_socket_enable > Jun 19 18:51:53 taz kernel: pccard0: read_cis > Jun 19 18:51:54 taz kernel: cis mem map 0xe675a000 (resource: 0x80000000) > Jun 19 18:51:54 taz kernel: pccard0: CIS tuple chain: > Jun 19 18:51:54 taz kernel: CISTPL_DEVICE type=null speed=null > Jun 19 18:51:54 taz kernel: 01 03 00 00 ff > Jun 19 18:51:54 taz kernel: CISTPL_DEVICE_A type=sram speed=ext > Jun 19 18:51:54 taz kernel: 17 04 67 5a 08 ff > Jun 19 18:51:54 taz kernel: unhandled CISTPL 1d > Jun 19 18:51:54 taz kernel: 1d 05 01 67 5a 08 ff > Jun 19 18:51:54 taz kernel: CISTPL_VERS_1 > Jun 19 18:51:54 taz kernel: 15 50 05 00 44 2d 4c 69 6e 6b 00 44 2d 4c > 69 6e > Jun 19 18:51:54 taz kernel: 6b 20 41 69 72 20 44 57 4c 2d 36 36 30 20 > 57 69 > Jun 19 18:51:54 taz kernel: 72 65 6c 65 73 73 20 50 43 20 43 61 72 64 > 00 56 > Jun 19 18:51:54 taz kernel: 65 72 73 69 6f 6e 20 30 31 2e 30 31 00 00 > 00 00 > Jun 19 18:51:54 taz kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 > Jun 19 18:51:54 taz kernel: 00 ff > Jun 19 18:51:54 taz kernel: CISTPL_MANFID > Jun 19 18:51:54 taz kernel: 20 04 56 01 02 00 > Jun 19 18:51:54 taz kernel: CISTPL_FUNCID > Jun 19 18:51:54 taz kernel: 21 02 06 00 > Jun 19 18:51:54 taz kernel: CISTPL_FUNCE > Jun 19 18:51:54 taz kernel: 22 02 01 07 > Jun 19 18:51:54 taz kernel: CISTPL_FUNCE > Jun 19 18:51:54 taz kernel: 22 05 02 40 42 0f 00 > Jun 19 18:51:54 taz kernel: CISTPL_FUNCE > Jun 19 18:51:54 taz kernel: 22 05 02 80 84 1e 00 > Jun 19 18:51:54 taz kernel: CISTPL_FUNCE > Jun 19 18:51:54 taz kernel: 22 05 02 60 ec 53 00 > Jun 19 18:51:54 taz kernel: CISTPL_FUNCE > Jun 19 18:51:54 taz kernel: 22 05 02 c0 d8 a7 00 > Jun 19 18:51:54 taz kernel: CISTPL_FUNCE > Jun 19 18:51:54 taz kernel: 22 02 03 07 > Jun 19 18:51:54 taz kernel: CISTPL_FUNCE > Jun 19 18:51:54 taz kernel: 22 08 04 06 00 05 5d 24 96 17 > Jun 19 18:51:54 taz kernel: CISTPL_FUNCE > Jun 19 18:51:54 taz kernel: 22 02 05 01 > Jun 19 18:51:54 taz kernel: CISTPL_CONFIG > Jun 19 18:51:54 taz kernel: 1a 07 03 01 e0 03 00 00 01 > Jun 19 18:51:54 taz kernel: CISTPL_CFTABLE_ENTRY > Jun 19 18:51:54 taz kernel: 1b 0f c1 01 19 76 c5 4b d5 19 36 36 05 46 > 7f ff > Jun 19 18:51:54 taz kernel: ff > Jun 19 18:51:54 taz kernel: CISTPL_END > Jun 19 18:51:54 taz kernel: ff > Jun 19 18:51:54 taz kernel: cis mem map e675a000 > Jun 19 18:51:54 taz kernel: CISTPL_LINKTARGET expected, code 04 observed > Jun 19 18:51:54 taz kernel: pccard0: check_cis_quirks > Jun 19 18:51:54 taz kernel: pccard0: CIS version PC Card Standard 5.0 > Jun 19 18:51:54 taz kernel: pccard0: CIS info: D-Link, D-Link Air > DWL-660 Wireless PC Card, Version 01.01, > Jun 19 18:51:54 taz kernel: pccard0: Manufacturer code 0x156, product 0x2 > Jun 19 18:51:54 taz kernel: pccard0: function 0: network adapter, ccr > addr 3e0 mask 1 > Jun 19 18:51:54 taz kernel: pccard0: function 0, config table entry 1: > I/O card; irq mask ffff; iomask 6, iospa > ce 0-3f; io16 irqpulse irqlevel > Jun 19 18:51:54 taz kernel: pccard0: functions scanning > Jun 19 18:51:54 taz kernel: pccard0: Card has 1 functions. pccard_mfc > is 0 > Jun 19 18:51:54 taz kernel: pccard0: I/O rid 0 start 0 end ffffffff > Jun 19 18:51:54 taz kernel: pccard0: ccr_res == 80000000-800003ff, > base=3e0 > Jun 19 18:51:54 taz kernel: pccard0: function 0 CCR at 0 offset 3e0: > 41 80 22 ff, ff ff ff ff, ff > Jun 19 18:51:54 taz kernel: wi0: <D-Link D-Link Air DWL-660 Wireless > PC Card> at port 0x2080-0x20bf irq 11 func > tion 0 config 1 on pccard0 > Jun 19 18:51:54 taz kernel: wi0: [GIANT-LOCKED] > Jun 19 18:51:54 taz kernel: wi0: using Lucent Technologies, WaveLAN/IEEE > Jun 19 18:51:54 taz kernel: wi0: Lucent Firmware: Station (8.10.1) > Jun 19 18:51:54 taz kernel: wi0: Ethernet address: 00:05:5d:24:96:17 > Jun 19 18:51:54 taz kernel: wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > Jun 19 18:51:54 taz kernel: pccard0: function 0 CCR at 0 offset 3e0 > mask 1: 41 80 22 ff, ff ff ff ff, ff > > When issuing "ifconfig wi0 up ssid HOME" I get this in /var/log/messages: Jun 19 20:55:02 taz kernel: wi_newstate: INIT -> INIT Surely tthis is meant to go beyond INIT ? - Drew
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40D4001A.9080603>