Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 23 Aug 1997 08:56:59 -0700
From:      Cy Schubert <cy@uumail.gov.bc.ca>
To:        freebsd-hardware@freebsd.org
Cc:        cschuber@uumail.gov.bc.ca
Subject:   3C509B Card
Message-ID:  <199708231557.IAA08451@cwsys.cwent.com>

next in thread | raw e-mail | index | archive | help
Recently I replaced a faulty SMC Elite 16 card with a 3COM 3C509B card.  It's
been working fine, almost too fine.  Since installing the card I haven't seen
any collisions.  My network consists of a P120 with the 3C509B and a 486DX/33
with an SMC Elite 16 connected via thinnet up through the attic of my house.

Is it possible that the Parallel Tasking feature of the card is handling
collisions itself without reporting them to FreeBSD?  Or, is there a bug in
the FreeBSD driver that it's not recognizing or reporting collisions.  As I
write this the netstat -i on the P120 (3C509B) reports:

cwsys$ netstat -i
Name  Mtu   Network       Address            Ipkts Ierrs    Opkts Oerrs  Coll
lp0*  1500  <Link>                               0     0        0     0     0
ep0   1500  <Link>      00.60.97.d3.32.3e   452413   411   444431     1     0
ep0   1500  cw-subnet/24  cwsys             452413   411   444431     1     0
sl0*  552   <Link>                               0     0        0     0     0
ppp0  1500  <Link>                            2969     1     3176     0     0
ppp0  1500  bcsc-net2     cschuber.net.go     2969     1     3176     0     0
lo0   16384 <Link>                           30126     0    30126     0     0
lo0   16384 localnet      localhost          30126     0    30126     0     0
cwsys$ 

And the netstat -i on the 486 (SMC Elite 16) reports:

cwsys$ rsh cwtest netstat -i
Name  Mtu   Network       Address            Ipkts Ierrs    Opkts Oerrs  Coll
ed0   1500  <Link>      00.00.c0.d9.b1.4a   444764     0   453362     0 12447
ed0   1500  cwnet.cwent.c cwtest            444764     0   453362     0 12447
lp0*  1500  <Link>                               0     0        0     0     0
lo0   16384 <Link>                            7933     0     7933     0     0
lo0   16384 your-net      localhost           7933     0     7933     0     0
cwsys$ 

The card is working fine.  It's just puzzling that I see these kind of numbers
from netstat.  When I had an SMC card installed in the P120 it too reported
collisions.


Regards,                       Phone:  (250)387-8437
Cy Schubert                      Fax:  (250)387-5766
UNIX Support                   OV/VM:  BCSC02(CSCHUBER)
ITSD                          BITNET:  CSCHUBER@BCSC02.BITNET
Government of BC            Internet:  cschuber@uumail.gov.bc.ca
                                       cschuber@bcsc02.gov.bc.ca
                                       cy@uumail.gov.bc.ca

		"Quit spooling around, JES do it."




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199708231557.IAA08451>