Date: Fri, 25 Jul 2003 20:17:02 +0200 (CEST) From: =?iso-8859-1?q?Mica=20Telodico?= <maria_libera2000@yahoo.it> To: fierman@puscii.nl, freebsd-questions@freebsd.org Subject: Re: DVD/CD-RW not recognized (was: Re:) Message-ID: <20030725181702.28980.qmail@web41904.mail.yahoo.com> In-Reply-To: <1059157559.59338.24.camel@amiga.puscii>
next in thread | previous in thread | raw e-mail | index | archive | help
Yes , your message is identical to mine . And the dmesg is also similar too ( but the drives are different) What is your HW? (CPU , MoBo and drive with problems) Bye Marcello --- Fierman <fierman@puscii.nl> ha scritto: > On Fri, 2003-07-25 at 15:03, Volker Kindermann > wrote: > > > ACD0 is only the DVD , CD-RW (a Liteon 52x 24x > 52x) > > > isn't found at all!! Literally from DMESG: > > > > > > ata0-slave: ATA identify retries excedeed > > > > > > and sometimes it doesn't find my DVD too , with > the > > > message : > > > > > > ata1-slave: ATA identify retries excedeed > > > > > > so, I'm without CD and DVD :cry: > > > > > > What I can do?? > > > > first, you should check if the jumpers on all (!) > ATA devices are set > > correctly: > > > > Set the masters to "master" and the DVD and CDRW > to "slave" (not > > cable-select). > > > > If that doesn't help, check the cables. Perhaps > you have some spare > > cables and you can change them. > > > > If that doesn't help, provide us with your > complete dmesg. > > -volker > > ___ > > this problem sounds like the exact one as i am > having, (see my mail to > this list: > > Subject: > ATA identify retries exceeded > (still!) > Date: > 24 Jul 2003 23:59:57 +0000 > > > jumpersettings are all ok, no possible signs of > hardware itself being > faulty. > > dmesg : > > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > 1991, 1992, 1993, 1994 > The Regents of the University of California. > All rights > reserved. > FreeBSD 4.8-STABLE #0: Wed Jul 9 15:27:44 CEST 2003 > > root@deeveedeedoos.puscii:/usr/obj/usr/src/sys/kernel100703 > Timecounter "i8254" frequency 1193182 Hz > CPU: Intel Celeron (1002.28-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x68a Stepping = 10 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 133169152 (130048K bytes) > config> di bt0 > config> di aic0 > config> di aha0 > config> di adv0 > config> q > avail memory = 123887616 (120984K bytes) > Preloaded elf kernel "kernel" at 0xc058f000. > Preloaded userconfig_script "/boot/kernel.conf" at > 0xc058f09c. > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 4 entries at 0xc00fdf30 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82810E (i810E GMCH) Host To Hub > bridge> on motherboard > pci0: <PCI bus> on pcib0 > agp0: <Intel 82810E (i810E GMCH) SVGA controller> > mem > 0xd6000000-0xd607ffff,0xd0000000-0xd3ffffff irq 11 > at device 1.0 on pci0 > pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at > device 30.0 on pci0 > pci1: <PCI bus> on pcib1 > sis0: <SiS 900 10/100BaseTX> port 0xc000-0xc0ff mem > 0xd5000000-0xd5000fff irq 11 at device 4.0 on pci1 > sis0: Ethernet address: 00:d0:09:84:d3:2c > miibus0: <MII bus> on sis0 > ukphy0: <Generic IEEE 802.3u media interface> on > miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, auto > pcm0: <CMedia CMI8738> port 0xc400-0xc4ff irq 10 at > device 5.0 on pci1 > pci1: <unknown card> (vendor=0x13f6, dev=0x0211) at > 5.1 irq 3 > isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at > device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH ATA66 controller> port > 0xf000-0xf00f at device 31.1 > on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82801AA (ICH) USB controller> port > 0xd000-0xd01f irq 4 at > device 31.2 on pci0 > usb0: <Intel 82801AA (ICH) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev > 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > orm0: <Option ROMs> at iomem > 0xc0000-0xc9fff,0xcc000-0xcffff on isa0 > fdc0: <NEC 72065B or clone> at port > 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port > 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model Generic PS/2 mouse, device ID 0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > 0xa0000-0xbffff on > isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs > 0 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 > sio1: configured irq 3 not in bitmap of probed irqs > 0 > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on > isa0 > ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE > mode > ppc0: FIFO with 16/16/16 bytes threshold > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ata0-slave: ATA identify retries exceeded > ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at > ata0-master UDMA33 > Mounting root from ufs:/dev/ad0s1a > > > > thnx in advance, > fierman > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" ______________________________________________________________________ Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam http://it.yahoo.com/mail_it/foot/?http://it.mail.yahoo.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030725181702.28980.qmail>