Date: Wed, 18 Feb 2009 10:31:47 +0200 From: Krassimir Slavchev <krassi@bulinfo.net> To: Royce Williams <royce@alaska.net> Cc: FreeBSD <freebsd-stable@freebsd.org> Subject: Re: Booting 7.1-STABLE on supermicro 5015-MF (PDSMI+) Message-ID: <499BC773.70701@bulinfo.net> In-Reply-To: <499AFE8F.3080207@alaska.net> References: <499AF864.9010506@bulinfo.net> <499AFE8F.3080207@alaska.net>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Royce Williams wrote: > Krassimir Slavchev wrote, on 2/17/2009 8:48 AM: >> It boots 7.1-RELEASE from the CDROM just fine but when boots from an IDE >> disk it crashes right after loading the kernel: >> >> http://mnemonic.bulinfo.net/~krassi/crash/supermicro_crash.jpg >> >> Booting from the USB produces exactly the same crash. I know that the >> BIOS of this board is buggy although it is latest. >> I am curious why it boots from the CDROM but cannot boots from the IDE >> disk. I just disconnect the CDROM and connect the IDE disk. The same IDE >> disk boots fine on other hardware. I have tried with 7.1-PRERELEASE >> which is 2-3 months older than 7.1-RELEASE and it crashes in same way. > > I see from the phot that you're running a custom kernel. What's > different between that kernel and GENERIC? Almost nothing. > > Data point: I'm running 7.1-RELEASE, installed from CD, on a PDSMI+ > board, but I am booting from SATA. This may help to rule out possible > non-IDE issues. When I boot from CD the IDE disk remains undetected but with SATA disk no problems. So the problem seems to be only with IDE disks. I am going to buy a SATA disks. > > I'm tracking with freebsd-update(8), but there have been no > kernel updates yet. It's a fresh install with no kernel or sysctl > tuning, and hasn't taken any load yet. > > $ uptime > 10:02AM up 10 days, 18:50, 1 user, load averages: 0.00, 0.00, 0.00 > > $ uname -a > FreeBSD dragonfly.acsalaska.net 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Thu Jan 1 14:37:25 UTC 2009 root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 > > $ cat /var/run/dmesg.boot > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-RELEASE #0: Thu Jan 1 14:37:25 UTC 2009 > root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2394.01-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > real memory = 3756916736 (3582 MB) > avail memory = 3672895488 (3502 MB) > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <PTLTD RSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci9: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9 > pci10: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci13: <ACPI PCI bus> on pcib4 > em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x4000-0x401f mem 0xe0200000-0xe021ffff irq 16 at device 0.0 on pci13 > em0: Using MSI interrupt > em0: [FILTER] > em0: Ethernet address: 00:30:48:8d:30:74 > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 > pci14: <ACPI PCI bus> on pcib5 > em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x5000-0x501f mem 0xe0300000-0xe031ffff irq 17 at device 0.0 on pci14 > em1: Using MSI interrupt > em1: [FILTER] > em1: Ethernet address: 00:30:48:8d:30:75 > uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 23 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 19 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device 29.3 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb3: <UHCI (generic) USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0000000-0xe00003ff irq 23 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 > uhub4: 8 ports with 8 removable, self powered > pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci15: <ACPI PCI bus> on pcib6 > vgapci0: <VGA-compatible display> port 0x6000-0x60ff mem 0xe8000000-0xefffffff,0xe0400000-0xe040ffff irq 16 at device 0.0 on pci15 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > atapci1: <Intel ICH7 SATA300 controller> port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe0000400-0xe00007ff irq 19 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A, console > sio0: [FILTER] > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > sio1: [FILTER] > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 921092106000921 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 921092106000921 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff pnpid ORM0000 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > ppbus0: [ITHREAD] > plip0: <PLIP network interface> on ppbus0 > plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ppc0: [GIANT-LOCKED] > ppc0: [ITHREAD] > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33 > ad4: 238475MB <Seagate ST3250820AS 3.AAE> at ata2-master SATA150 > ad6: 238475MB <Seagate ST3250820AS 3.AAE> at ata3-master SATA150 > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad4s1a > $ > > Royce > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) iD8DBQFJm8dyxJBWvpalMpkRAjS7AKCCejCzBQEV6ja2kj8bltPA00zsIgCfVORC OMt9scuIQIwz/Rthrf2aE2M= =Tjvf -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?499BC773.70701>