Date: Sat, 05 Sep 2009 19:54:55 +0200 From: Ralph Zitz <ralph@imada.sdu.dk> To: freebsd-usb@freebsd.org Subject: USB quirks Message-ID: <4AA2A5EF.7090100@imada.sdu.dk>
next in thread | raw e-mail | index | archive | help
Hello, How does one know which quirks to add? At the moment I'm getting the following messages when attaching my device: ugen4.2: <vendor 0x0781> at usbus4 umass0: <vendor 0x0781 product 0x5406, class 0/0, rev 2.00/2.00, addr 2> on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:3:0:-1: Attached to scbus3 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk Cruzer 7.01> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 15286MB (31306239 512 byte sectors: 255H 63S/T 1948C) xptioctl: pass driver is not in the kernel xptioctl: put "device pass" in your kernel config file (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition (probe0:umass-sim0:0:0:1): UNIT ATTENTION asc:29,0 (probe0:umass-sim0:0:0:1): Power on, reset, or bus device reset occurred (probe0:umass-sim0:0:0:1): Retrying Command (per Sense Data) (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition (probe0:umass-sim0:0:0:1): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:1): Medium not present (probe0:umass-sim0:0:0:1): Unretryable error cd1 at umass-sim0 bus 0 target 0 lun 1 cd1: <SanDisk Cruzer 7.01> Removable CD-ROM SCSI-0 device cd1: 40.000MB/s transfers cd1: cd present [49151 x 2048 byte records] GEOM: da0: media size does not match label. The usbstick was formatted with fat32. In /dev I have da0 and da0a listed, yet neither can be mounted: sudo mount_msdosfs /dev/da0a /home/ralph/mnt mount_msdosfs: /dev/da0a: Invalid argument sudo mount_msdosfs /dev/da0 /home/ralph/mnt mount_msdosfs: /dev/da0: Invalid argument I also don't understand the message about the pass device not being in the kernel conf - it is. Any help would be greatly appreciated. Regards, Ralph.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4AA2A5EF.7090100>