Date: Mon, 17 Aug 1998 14:40:23 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Philippe Regnauld <regnauld@deepo.prosa.dk> Cc: freebsd-smp@FreeBSD.ORG Subject: Re: PR440fx (Toshiba) + SMP ? Message-ID: <Pine.LNX.4.02.9808171439060.982-100000@feral-gw> In-Reply-To: <19980817220046.44173@deepo.prosa.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
Hmm. I have a PR440FX (intel) + 2 x 180Mhz PPros, which work for me...
albeit I'm using the CAM branch right now:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #10: Mon Aug 10 00:34:54 PDT 1998
mjacob@quarm.feral.com:/freebsd/cam/usr/src/sys/compile/SMP-QUARM
Timecounter "i8254" frequency 1193182 Hz cost 3928 ns
CPU: Pentium Pro (686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 33554432 (32768K bytes)
avail memory = 29958144 (29256K bytes)
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000
cpu1 (AP): apic id: 12, version: 0x00040011, at 0xfec08000
io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on
pci0.0.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 18 on
pci0.6.
0
fxp0: Ethernet address 00:a0:c9:60:34:f5
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> rev 0x00 int a irq 17 on
pci0.9.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
***Qlogic ISP Driver, FreeBSD CAM Version 0.94, Core Version 1.1
isp0: <Qlogic ISP 10X0 PCI SCSI Adapter> rev 0x05 int a irq 17 on
pci0.15.0
isp0: using I/O space register mapping
isp0: Board Revision 1040B, loaded F/W Revision 2.10
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL_TM2110A>
wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: routing 8254 via 8259 on pin 0
isp0: Bus Reset
SMP: AP CPU #1 Launched!
sa0 at isp0 bus 0 target 4 lun 0
sa0: <EXABYTE EXB-8505SMBANSH2 07T0> Removable Sequential Access SCSI2
device
sa0: 5.0MB/s transfers (5.0MHz, offset 8)
sa1 at isp0 bus 0 target 5 lun 0
sa1: <EXABYTE EXB-8505SMBANSH2 07T0> Removable Sequential Access SCSI2
device
sa1: 5.0MB/s transfers (5.0MHz, offset 8)
da0 at ahc0 bus 0 target 1 lun 0
da0: <CONNER CFP2107E 2.14GB 1527> Fixed Direct Access SCSI2 device
da0: 20.0MB/s transfers (10.0MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <CONNER CFP2107E 2.14GB 1527> Fixed Direct Access SCSI2 device
da1: 20.0MB/s transfers (10.0MHz, offset 8, 16bit), Tagged Queueing
Enabled
da1: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
da2 at ahc0 bus 0 target 3 lun 0
da2: <CONNER CFP2107E 2.14GB 1527> Fixed Direct Access SCSI2 device
da2: 20.0MB/s transfers (10.0MHz, offset 8, 16bit), Tagged Queueing
Enabled
da2: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
changing root device to wd0s1a
ch0 at isp0 bus 0 target 6 lun 0
ch0: <EXABYTE EXB-210 3.08> Removable Changer SCSI2 device
ch0: 3.300MB/s transfers
ch0: 11 slots, 2 drives, 1 picker, 0 portals
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.02.9808171439060.982-100000>