From owner-freebsd-questions@freebsd.org Tue Mar 29 17:24:03 2016 Return-Path: Delivered-To: freebsd-questions@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 94CE8AE2D75 for ; Tue, 29 Mar 2016 17:24:03 +0000 (UTC) (envelope-from freebsd-questions@m.gmane.org) Received: from plane.gmane.org (plane.gmane.org [80.91.229.3]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 40CE61979 for ; Tue, 29 Mar 2016 17:24:03 +0000 (UTC) (envelope-from freebsd-questions@m.gmane.org) Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1akxN0-0007ro-Oc for freebsd-questions@freebsd.org; Tue, 29 Mar 2016 19:23:59 +0200 Received: from 65.75.36.70 ([65.75.36.70]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Tue, 29 Mar 2016 19:23:58 +0200 Received: from gyliamos by 65.75.36.70 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Tue, 29 Mar 2016 19:23:58 +0200 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-questions@freebsd.org From: Will Parsons Subject: Re: how to downgrade X server Date: Tue, 29 Mar 2016 17:23:39 +0000 (UTC) Lines: 483 Message-ID: References: <56F60B8D.8080900@ShaneWare.Biz> <56F77C30.5090808@ShaneWare.Biz> Reply-To: gyliamos@gmail.com X-Complaints-To: usenet@ger.gmane.org X-Gmane-NNTP-Posting-Host: 65.75.36.70 User-Agent: slrn/1.0.1 (FreeBSD) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Mar 2016 17:24:03 -0000 Warren Block wrote: > On Mon, 28 Mar 2016, Will Parsons wrote: > >> I haven't been using one. The Xorg log shows: >> ... > > The fbdev errors are ignorable. Is that the entire log? The Intel > HD3000 should work fine. No - I just started with the first errror messages. I've included the entire log below. > As a start, please describe your hardware. Some notebooks have hybrid > graphics like Optimus which are a problem. If that is not present, > defining just the device in xorg.conf.d might be all that is needed. It's a Lenovo Edge E520 laptop - see below for info from dmesg. Any help is much appreciated. Xorg.0.log: ========== [ 80.043] X.Org X Server 1.17.4 Release Date: 2015-10-28 [ 80.043] X Protocol Version 11, Revision 0 [ 80.043] Build Operating System: FreeBSD 9.3-RELEASE-p39 i386 [ 80.043] Current Operating System: FreeBSD anukis.local 9.3-RELEASE-p21 FreeBSD 9.3-RELEASE-p21 #0: Tue Jul 28 08:57:41 UTC 2015 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386 [ 80.043] Build Date: 26 March 2016 03:53:10AM [ 80.043] [ 80.043] Current version of pixman: 0.34.0 [ 80.043] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 80.043] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 80.044] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 29 12:53:57 2016 [ 80.129] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d" [ 80.151] (==) No Layout section. Using the first Screen section. [ 80.151] (==) No screen section available. Using defaults. [ 80.151] (**) |-->Screen "Default Screen Section" (0) [ 80.151] (**) | |-->Monitor "" [ 80.152] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 80.152] (==) Automatically adding devices [ 80.152] (==) Automatically enabling devices [ 80.152] (==) Not automatically adding GPU devices [ 80.376] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/ [ 80.376] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 80.376] (II) The server relies on devd to provide the list of input devices. If no devices become available, reconfigure devd or disable AutoAddDevices. [ 80.376] (II) Loader magic: 0x8226b40 [ 80.376] (II) Module ABI versions: [ 80.376] X.Org ANSI C Emulation: 0.4 [ 80.376] X.Org Video Driver: 19.0 [ 80.376] X.Org XInput driver : 21.0 [ 80.376] X.Org Server Extension : 9.0 [ 80.399] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21e2 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/65536 [ 80.400] (II) LoadModule: "glx" [ 80.457] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 80.629] (II) Module glx: vendor="X.Org Foundation" [ 80.629] compiled for 1.17.4, module version = 1.0.0 [ 80.629] ABI class: X.Org Server Extension, version 9.0 [ 80.629] (==) AIGLX enabled [ 80.630] (==) Matched intel as autoconfigured driver 0 [ 80.630] (==) Matched fbdev as autoconfigured driver 1 [ 80.630] (==) Matched vesa as autoconfigured driver 2 [ 80.630] (==) Assigned the driver to the xf86ConfigLayout [ 80.630] (II) LoadModule: "intel" [ 80.630] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 80.665] (II) Module intel: vendor="X.Org Foundation" [ 80.665] compiled for 1.17.4, module version = 2.21.15 [ 80.665] Module class: X.Org Video Driver [ 80.665] ABI class: X.Org Video Driver, version 19.0 [ 80.665] (II) LoadModule: "fbdev" [ 80.665] (II) Loading /usr/local/lib/xorg/modules/drivers/fbdev_drv.so [ 80.679] (II) Module fbdev: vendor="X.Org Foundation" [ 80.679] compiled for 1.17.4, module version = 0.4.4 [ 80.679] Module class: X.Org Video Driver [ 80.679] ABI class: X.Org Video Driver, version 19.0 [ 80.679] (II) LoadModule: "vesa" [ 80.680] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 80.689] (II) Module vesa: vendor="X.Org Foundation" [ 80.689] compiled for 1.17.4, module version = 2.3.4 [ 80.689] Module class: X.Org Video Driver [ 80.689] ABI class: X.Org Video Driver, version 19.0 [ 80.689] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 80.691] (II) FBDEV: driver for framebuffer: fbdev [ 80.691] (II) VESA: driver for VESA chipsets: vesa [ 80.691] (--) Using syscons driver with X support (version 2.0) [ 80.691] (--) using VT number 9 [ 81.644] (WW) Falling back to old probe method for fbdev [ 81.644] (II) Loading sub module "fbdevhw" [ 81.644] (II) LoadModule: "fbdevhw" [ 81.669] (II) Loading /usr/local/lib/xorg/modules/libfbdevhw.so [ 81.679] (EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data object. [ 81.679] (II) UnloadModule: "fbdevhw" [ 81.679] (II) Unloading fbdevhw [ 81.679] (EE) Failed to load module "fbdevhw" (invalid module, 0) [ 81.679] (WW) Falling back to old probe method for vesa [ 81.679] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 81.680] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 81.680] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 81.680] (==) intel(0): RGB weight 888 [ 81.680] (==) intel(0): Default visual is TrueColor [ 81.680] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000 [ 81.687] (**) intel(0): Relaxed fencing enabled [ 81.687] (**) intel(0): Wait on SwapBuffers? enabled [ 81.687] (**) intel(0): Triple buffering? enabled [ 81.687] (**) intel(0): Framebuffer tiled [ 81.687] (**) intel(0): Pixmaps tiled [ 81.687] (**) intel(0): 3D buffers tiled [ 81.687] (**) intel(0): SwapBuffers wait enabled [ 81.687] (==) intel(0): video overlay key set to 0x101fe [ 81.687] (II) intel(0): Output LVDS1 has no monitor section [ 81.706] (II) intel(0): Output VGA1 has no monitor section [ 81.711] (II) intel(0): Output HDMI1 has no monitor section [ 81.720] (II) intel(0): Output DP1 has no monitor section [ 81.732] (II) intel(0): EDID for output LVDS1 [ 81.732] (II) intel(0): Manufacturer: LGD Model: 2e3 Serial#: 0 [ 81.732] (II) intel(0): Year: 2010 Week: 0 [ 81.732] (II) intel(0): EDID Version: 1.3 [ 81.732] (II) intel(0): Digital Display Input [ 81.732] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 81.732] (II) intel(0): Gamma: 2.20 [ 81.732] (II) intel(0): No DPMS capabilities specified [ 81.732] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 81.732] (II) intel(0): First detailed timing is preferred mode [ 81.732] (II) intel(0): redX: 0.613 redY: 0.371 greenX: 0.350 greenY: 0.606 [ 81.732] (II) intel(0): blueX: 0.152 blueY: 0.099 whiteX: 0.313 whiteY: 0.329 [ 81.732] (II) intel(0): Manufacturer's mask: 0 [ 81.732] (II) intel(0): Supported detailed timing: [ 81.732] (II) intel(0): clock: 70.0 MHz Image Size: 344 x 194 mm [ 81.732] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1492 h_border: 0 [ 81.732] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 782 v_border: 0 [ 81.732] (II) intel(0): LG Display [ 81.732] (II) intel(0): LP156WH4-TLB1 [ 81.732] (II) intel(0): EDID (in hex): [ 81.732] (II) intel(0): 00ffffffffffff0030e4e30200000000 [ 81.732] (II) intel(0): 00140103802213780a09159d5f599b27 [ 81.732] (II) intel(0): 19505400000001010101010101010101 [ 81.732] (II) intel(0): 010101010101581b567e50000e302430 [ 81.732] (II) intel(0): 350058c2100000190000000000000000 [ 81.732] (II) intel(0): 00000000000000000000000000fe004c [ 81.732] (II) intel(0): 4720446973706c61790a2020000000fe [ 81.732] (II) intel(0): 004c503135365748342d544c42310001 [ 81.732] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 81.732] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 81.732] (II) intel(0): Printing probed modes for output LVDS1 [ 81.732] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP) [ 81.732] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 81.732] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 81.732] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 81.732] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 81.751] (II) intel(0): EDID for output VGA1 [ 81.751] (II) intel(0): Manufacturer: EPI Model: e781 Serial#: 4909 [ 81.751] (II) intel(0): Year: 2002 Week: 30 [ 81.751] (II) intel(0): EDID Version: 1.3 [ 81.751] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 81.751] (II) intel(0): Sync: Separate [ 81.751] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 81.751] (II) intel(0): Gamma: 2.20 [ 81.751] (II) intel(0): DPMS capabilities: Off; RGB/Color Display [ 81.751] (II) intel(0): First detailed timing is preferred mode [ 81.751] (II) intel(0): redX: 0.640 redY: 0.347 greenX: 0.302 greenY: 0.587 [ 81.751] (II) intel(0): blueX: 0.143 blueY: 0.099 whiteX: 0.321 whiteY: 0.338 [ 81.751] (II) intel(0): Supported established timings: [ 81.751] (II) intel(0): 720x400@70Hz [ 81.751] (II) intel(0): 640x480@60Hz [ 81.751] (II) intel(0): 640x480@67Hz [ 81.751] (II) intel(0): 640x480@72Hz [ 81.751] (II) intel(0): 640x480@75Hz [ 81.751] (II) intel(0): 800x600@56Hz [ 81.751] (II) intel(0): 800x600@60Hz [ 81.751] (II) intel(0): 800x600@72Hz [ 81.751] (II) intel(0): 800x600@75Hz [ 81.751] (II) intel(0): 832x624@75Hz [ 81.751] (II) intel(0): 1024x768@60Hz [ 81.751] (II) intel(0): 1024x768@70Hz [ 81.751] (II) intel(0): 1024x768@75Hz [ 81.751] (II) intel(0): 1280x1024@75Hz [ 81.751] (II) intel(0): Manufacturer's mask: 0 [ 81.751] (II) intel(0): Supported detailed timing: [ 81.751] (II) intel(0): clock: 135.0 MHz Image Size: 340 x 270 mm [ 81.751] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 81.751] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 81.751] (II) intel(0): Serial No: T7KB27AG04909 [ 81.751] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 135 MHz [ 81.751] (II) intel(0): Monitor name: EN-7100s [ 81.751] (II) intel(0): EDID (in hex): [ 81.751] (II) intel(0): 00ffffffffffff00160981e72d130000 [ 81.751] (II) intel(0): 1e0c010368221b782af596a3584d9624 [ 81.751] (II) intel(0): 195256bfef0001010101010101010101 [ 81.751] (II) intel(0): 010101010101bc34009851002a401090 [ 81.751] (II) intel(0): 1300540e11000018000000ff0054374b [ 81.751] (II) intel(0): 42323741473034393039000000fd0037 [ 81.751] (II) intel(0): 4b1e500d000a202020202020000000fc [ 81.751] (II) intel(0): 00454e2d37313030730a2020202000ea [ 81.751] (II) intel(0): Printing probed modes for output VGA1 [ 81.751] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz eP) [ 81.751] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 81.751] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 81.751] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 81.752] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 81.752] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 81.752] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 81.752] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 81.752] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 81.752] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 81.752] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 81.752] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 81.752] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 81.752] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 81.752] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 81.756] (II) intel(0): EDID for output HDMI1 [ 81.765] (II) intel(0): EDID for output DP1 [ 81.765] (II) intel(0): Output LVDS1 connected [ 81.765] (II) intel(0): Output VGA1 connected [ 81.765] (II) intel(0): Output HDMI1 disconnected [ 81.765] (II) intel(0): Output DP1 disconnected [ 81.765] (II) intel(0): Using fuzzy aspect match for initial modes [ 81.765] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 81.765] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 81.765] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 81.765] (II) intel(0): Kernel page flipping support detected, enabling [ 81.765] (==) intel(0): DPI set to (96, 96) [ 81.765] (II) Loading sub module "fb" [ 81.765] (II) LoadModule: "fb" [ 81.765] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 81.782] (II) Module fb: vendor="X.Org Foundation" [ 81.782] compiled for 1.17.4, module version = 1.0.0 [ 81.782] ABI class: X.Org ANSI C Emulation, version 0.4 [ 81.782] (II) Loading sub module "dri2" [ 81.782] (II) LoadModule: "dri2" [ 81.782] (II) Module "dri2" already built-in [ 81.782] (II) UnloadModule: "fbdev" [ 81.782] (II) Unloading fbdev [ 81.782] (II) UnloadModule: "vesa" [ 81.782] (II) Unloading vesa [ 81.782] (==) Depth 24 pixmap format is 32 bpp [ 81.782] (II) intel(0): [DRI2] Setup complete [ 81.782] (II) intel(0): [DRI2] DRI driver: i965 [ 81.782] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 81.827] (II) UXA(0): Driver registered support for the following operations: [ 81.827] (II) solid [ 81.827] (II) copy [ 81.827] (II) composite (RENDER acceleration) [ 81.827] (II) put_image [ 81.827] (II) get_image [ 81.836] (==) intel(0): Backing store enabled [ 81.836] (==) intel(0): Silken mouse enabled [ 81.837] (II) intel(0): Initializing HW Cursor [ 81.837] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 81.850] (==) intel(0): DPMS enabled [ 81.850] (==) intel(0): Intel XvMC decoder enabled [ 81.850] (II) intel(0): Set up textured video [ 81.851] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 81.851] (II) intel(0): direct rendering: DRI2 Enabled [ 82.163] (--) RandR disabled dmesg output: ============= Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.3-RELEASE-p21 #0: Tue Jul 28 08:57:41 UTC 2015 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (2494.39-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 0x6 Model = 0x2a Stepping = 7 Features=0xbfebfbff Features2=0x17bae3bf AMD Features=0x28100000 AMD Features2=0x1 TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3048456192 (2907 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: on motherboard acpi0: on motherboard acpi0: Power Button (fixed) acpi0: reservation of 20000000, 200000 (3) failed acpi0: reservation of 40000000, 200000 (3) failed cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0x5000-0x503f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 65532k stolen memory vgapci0: Boot video device pci0: at device 22.0 (no driver attached) ehci0: mem 0xd260a000-0xd260a3ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 hdac0: mem 0xd2600000-0xd2603fff irq 22 at device 27.0 on pci0 pcib1: irq 16 at device 28.0 on pci0 pci1: on pcib1 pcib2: irq 17 at device 28.1 on pci0 pci2: on pcib2 re0: port 0x4000-0x40ff mem 0xd0404000-0xd0404fff,0xd0400000-0xd0403fff irq 17 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00200000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: f0:de:f1:e1:73:7c pcib3: irq 18 at device 28.2 on pci0 pci3: on pcib3 pcib4: irq 19 at device 28.3 on pci0 pci8: on pcib4 iwn0: mem 0xd1d00000-0xd1d01fff irq 19 at device 0.0 on pci8 pcib5: irq 19 at device 28.7 on pci0 pci9: on pcib5 ehci1: mem 0xd2609000-0xd26093ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0x5088-0x508f,0x5094-0x5097,0x5080-0x5087,0x5090-0x5093,0x5060-0x507f mem 0xd2608000-0xd26087ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich4: at channel 4 on ahci0 ahcich5: at channel 5 on ahci0 acpi_acad0: on acpi0 acpi_lid0: on acpi0 acpi_tz0: on acpi0 acpi_tz1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: on acpi0 acpi_ibm0: on acpi0 pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0: at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: at port 0x170-0x177,0x376 irq 15 on isa0 ppc0: parallel port not found. est0: on cpu0 p4tcc0: on cpu0 est1: on cpu1 p4tcc1: on cpu1 est2: on cpu2 p4tcc2: on cpu2 est3: on cpu3 p4tcc3: on cpu3 Timecounters tick every 1.000 msec hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 31 and 27 on hdaa0 pcm1: at nid 25 and 35 on hdaa0 hdacc1: at cad 3 on hdac0 hdaa1: at nid 1 on hdacc1 pcm2: at nid 5 on hdaa1 usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ACPI Error: No handler for Region [ECRM] (0xc7c113c0) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\134_TZ_.RDEC] (Node 0xc7babb20), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._TMP] (Node 0xc7babac0), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: No handler for Region [ECRM] (0xc7c11500) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\134_TZ_.MDEC] (Node 0xc7babb00), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._SCP] (Node 0xc7baba80), AE_NOT_EXIST (20110527/psparse-560) ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: Serial Number J3350080GM11TC ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors: 1H 63S/T 16383C) ada0: Previously was known as ad4 cd0 at ahcich4 bus 0 scbus1 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: Serial Number S45N7592Z1ZKBE01AG4L cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1247194466 Hz quality 1000 Root mount waiting for: usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: at usbus0 uhub2: on usbus0 ugen1.2: at usbus1 uhub3: on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.3: at usbus0 uhub4: on usbus0 ugen1.3: at usbus1 ukbd0: on usbus1 kbd2 at ukbd0 ums0: on usbus1 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0: on usbus1 uhub4: 4 ports with 4 removable, self powered ugen0.4: at usbus0 ukbd1: on usbus0 kbd3 at ukbd1 Root mount waiting for: usbus0 Root mount waiting for: usbus0 ugen0.5: at usbus0 Trying to mount root from ufs:/dev/ada0s3a [rw]... ACPI Error: No handler for Region [ECRM] (0xc7c11540) [EmbeddedControl] (20110527/evregion-421) ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310) ACPI Error: Method parse/execution failed [\134_TZ_.RDEC] (Node 0xc7babb20), AE_NOT_EXIST (20110527/psparse-560) ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._TMP] (Node 0xc7babac0), AE_NOT_EXIST (20110527/psparse-560) acpi_tz0: error fetching current temperature -- AE_NOT_EXIST wlan0: Ethernet address: 74:e5:0b:db:0e:20