From owner-freebsd-mobile Thu Mar 20 20:55: 3 2003 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 467A837B401 for ; Thu, 20 Mar 2003 20:54:47 -0800 (PST) Received: from endrun.org (66-159-173-249.adsl.snet.net [66.159.173.249]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4D80D43FD7 for ; Thu, 20 Mar 2003 20:54:45 -0800 (PST) (envelope-from christian@endrun.org) Received: from endrun.org (www@localhost [127.0.0.1]) by endrun.org (8.11.6/8.11.6) with SMTP id h2L53Ie17003 for ; Fri, 21 Mar 2003 00:03:18 -0500 (EST) (envelope-from christian@endrun.org) From: Christian Sauer Received: from 192.168.1.100 (SquirrelMail authenticated user christian) by www.endrun.org with HTTP; Fri, 21 Mar 2003 00:03:18 -0500 (EST) Message-ID: <4128.192.168.1.100.1048222998.squirrel@www.endrun.org> Date: Fri, 21 Mar 2003 00:03:18 -0500 (EST) Subject: HP Omnibook XE2-db: XFree86 4.3.0 core dumps To: X-Priority: 3 Importance: Normal X-Mailer: SquirrelMail (version 1.2.11) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org After installing XFree86 4.3.0 via ports to the omnibook, I built the config file using xf86config utility. When I try to run startx, XFree86 goes through it's startup routine and the screen flickers like it is about to go into graphics mode. It then core dumps and returns to the command line. I have found a bunch of stuff online about using this laptop with XFree86 v3 ... but nothing for v4. According to http://h200005.www2.hp.com/bc/docs/support/SupportManual/bpi03591/bpi03591.pdf This video chip is "SMI LynxE SM811 graphics controller with 2-MB 135-MHZ SGRAM" Anyone have any advice? -Christian System information below: nomad ~# uname -a FreeBSD nomad.endrun.org 4.5-RELEASE-p25 FreeBSD 4.5-RELEASE-p25 #0: Tue Mar 18 21:14:57 EST 2003 root@:/usr/obj/usr/src/sys/NOMAD i386 nomad ~# portversion -v | grep -i "xfree86" XFree86-4.3.0,1 = up-to-date with port XFree86-FontServer-4.3.0 = up-to-date with port XFree86-Server-4.3.0_2 = up-to-date with port XFree86-clients-4.3.0_1 = up-to-date with port XFree86-documents-4.3.0 = up-to-date with port XFree86-font100dpi-4.3.0 = up-to-date with port XFree86-font75dpi-4.3.0 = up-to-date with port XFree86-fontCyrillic-4.3.0 = up-to-date with port XFree86-fontDefaultBitmaps-4.3.0 = up-to-date with port XFree86-fontEncodings-4.3.0 = up-to-date with port XFree86-fontScalable-4.3.0 = up-to-date with port XFree86-libraries-4.3.0_1 = up-to-date with port nomad ~# grep "^[^#]" /etc/X11/XF86Config Section "Module" Load "dbe" # Double buffer extension SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection Load "type1" Load "speedo" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "ServerFlags" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "500 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc101" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/sysmouse" EndSection Section "Monitor" Identifier "My Monitor" HorizSync 31.5 - 57.0 VertRefresh 50-90 EndSection Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" Driver "vga" EndSection Section "Device" Identifier "Silicon Motion Lynx family" Driver "siliconmotion" #VideoRam 2048 # Insert Clocks lines here if appropriate EndSection Section "Screen" Identifier "Screen 1" Device "Silicon Motion Lynx family" Monitor "My Monitor" DefaultDepth 16 Subsection "Display" Depth 8 Modes ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1024x768" "800x600" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1024x768" "800x600" ViewPort 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "Simple Layout" Screen "Screen 1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection nomad ~# cat /var/log/XFree86.0.log XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 4.5 i386 [ELF] Build Date: 19 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 20 22:17:27 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "Silicon Motion Lynx family" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc101" (**) XKB: model: "pc101" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on freebsd (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80003b40, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7192 card 0000,0000 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 126f,0810 card 126f,0810 rev a6 class 03,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00 (II) PCI: 00:0a:0: chip 104c,ac1c card 0000,0000 rev 01 class 06,07,00 hdr 82 (II) PCI: 00:0a:1: chip 104c,ac1c card 0000,0000 rev 01 class 06,07,00 hdr 82 (II) PCI: 00:0e:0: chip 125d,1978 card 103c,0009 rev 10 class 04,01,00 hdr 80 (II) PCI: 00:0e:1: chip 125d,1978 card 103c,0009 rev 10 class 07,80,00 hdr 80 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Silicon Motion, Inc. SM810 LynxE rev 166, Mem @ 0xfd000000/24 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [1] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E [2] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E [3] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E [4] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E (II) PCI I/O resource overlap reduced 0x0000fcc0 from 0x0000fcff to 0x0000fcdf (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [1] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E [2] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E [3] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E [4] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E [9] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E [10] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E [11] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "siliconmotion" (II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o (II) Module siliconmotion: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.3.1 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx chipsets: Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM (II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (--) Chipset LynxE found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E [9] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E [10] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E [11] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [6] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [7] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [8] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E [12] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E [13] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E [14] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E [15] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [16] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) Silicon Motion(0): Depth 16, (--) framebuffer bpp 16 (==) Silicon Motion(0): RGB weight 565 (==) Silicon Motion(0): Default visual is TrueColor (==) Silicon Motion(0): Using Hardware Cursor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (==) Silicon Motion(0): Write-combining range (0xa0000,0x20000) was already clear (==) Silicon Motion(0): Write-combining range (0xc0000,0x40000) (II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000 (==) Silicon Motion(0): Write-combining range (0x0,0x1000) was already clear (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Silicon Motion(0): VESA BIOS detected (II) Silicon Motion(0): VESA VBE Version 0.0 (II) Silicon Motion(0): VESA VBE Total Mem: 2048 kB (II) Silicon Motion(0): VESA VBE OEM: Sÿ (--) Silicon Motion(0): Chipset: "LynxE" (==) Silicon Motion(0): Write-combining range (0xfd400000,0x10000) was already clear (II) Silicon Motion(0): Cursor Offset: FFFFFC00 Reserved: FFFFF800 (II) Silicon Motion(0): TFT Panel Size = 1024x768 (II) Silicon Motion(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) Silicon Motion(0): Write-combining range (0xa0000,0x10000) was already clear (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) Silicon Motion(0): I2C bus "I2C bus" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (==) Silicon Motion(0): Write-combining range (0x0,0x1000) was already clear (==) Silicon Motion(0): Using gamma correction (1.0, 1.0, 1.0) (--) Silicon Motion(0): videoram: 2048kB (--) Silicon Motion(0): Detected current MCLK value of 54.409 MHz (II) Silicon Motion(0): My Monitor: Using hsync range of 31.50-57.00 kHz (II) Silicon Motion(0): My Monitor: Using vrefresh range of 50.00-90.00 Hz (II) Silicon Motion(0): Clock range: 20.00 to 135.00 MHz (II) Silicon Motion(0): Mode: 640x350 16-bpp, 85.079948Hz (II) Silicon Motion(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x400 16-bpp, 85.079948Hz (II) Silicon Motion(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 720x400 16-bpp, 85.038902Hz (II) Silicon Motion(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x480 16-bpp, 60.000000Hz (II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x480 16-bpp, 72.808800Hz (II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x480 16-bpp, 75.000000Hz (II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x480 16-bpp, 85.008308Hz (II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 16-bpp, 56.250000Hz (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 16-bpp, 60.316540Hz (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 16-bpp, 72.187569Hz (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 16-bpp, 75.000000Hz (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 16-bpp, 85.136887Hz (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1024x768 16-bpp, 60.003841Hz (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1024x768 16-bpp, 70.069359Hz (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1024x768 16-bpp, 75.076218Hz (II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of range) (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1024x768 16-bpp, 84.996689Hz (II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of range) (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1152x864 16-bpp, 75.000000Hz (II) Silicon Motion(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1280x960" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1280x960" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 832x624 16-bpp, 74.551270Hz (II) Silicon Motion(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1152x768 16-bpp, 54.781902Hz (II) Silicon Motion(0): Not using default mode "1152x768" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1024" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1024x768 16-bpp, 70.069359Hz (II) Silicon Motion(0): Mode: 800x600 16-bpp, 85.136887Hz (II) Silicon Motion(0): Mode: 1024x768 16-bpp, 60.003841Hz (II) Silicon Motion(0): Mode: 832x624 16-bpp, 74.551270Hz (II) Silicon Motion(0): Mode: 800x600 16-bpp, 75.000000Hz (II) Silicon Motion(0): Mode: 800x600 16-bpp, 72.187569Hz (II) Silicon Motion(0): Mode: 800x600 16-bpp, 60.316540Hz (II) Silicon Motion(0): Mode: 800x600 16-bpp, 56.250000Hz (II) Silicon Motion(0): Mode: 640x480 16-bpp, 85.008308Hz (II) Silicon Motion(0): Mode: 640x480 16-bpp, 75.000000Hz (II) Silicon Motion(0): Mode: 640x480 16-bpp, 72.808800Hz (II) Silicon Motion(0): Mode: 640x480 16-bpp, 60.000000Hz (II) Silicon Motion(0): Mode: 720x400 16-bpp, 85.038902Hz (II) Silicon Motion(0): Mode: 640x400 16-bpp, 85.079948Hz (II) Silicon Motion(0): Mode: 640x350 16-bpp, 85.079948Hz (--) Silicon Motion(0): Virtual size is 1024x768 (pitch 1024) (**) Silicon Motion(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) Silicon Motion(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) Silicon Motion(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) Silicon Motion(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) Silicon Motion(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) Silicon Motion(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) Silicon Motion(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) Silicon Motion(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) Silicon Motion(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) Silicon Motion(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) Silicon Motion(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) Silicon Motion(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) Silicon Motion(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) Silicon Motion(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) Silicon Motion(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) Silicon Motion(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) Silicon Motion(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) Silicon Motion(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (**) Silicon Motion(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) Silicon Motion(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) Silicon Motion(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) Silicon Motion(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) Silicon Motion(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) Silicon Motion(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) Silicon Motion(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) Silicon Motion(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (**) Silicon Motion(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) Silicon Motion(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (**) Silicon Motion(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) Silicon Motion(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (==) Silicon Motion(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B] [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E [13] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E [14] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E [15] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E [16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (==) Silicon Motion(0): Write-combining range (0xfd400000,0x10000) was already clear (==) Silicon Motion(0): Write-combining range (0xfd000000,0x200000) (II) Silicon Motion(0): Cursor Offset: 001FFC00 Reserved: 001FF800 (II) Silicon Motion(0): TFT Panel Size = 1024x768 (II) Silicon Motion(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) Silicon Motion(0): Write-combining range (0xa0000,0x10000) was already clear (==) Silicon Motion(0): Write-combining range (0xa0000,0x20000) was already clear (II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000 (==) Silicon Motion(0): Write-combining range (0x0,0x1000) was already clear (II) Silicon Motion(0): Current mode 0x03. (II) Silicon Motion(0): Setting mode 0x62 (II) Silicon Motion(0): FrameBuffer Box: 0,0 - 1024,1023 (II) Silicon Motion(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 8 128x128 slots 32 8x8 color pattern slots (II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" registered at address 0x48. (II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" removed. *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Fatal server error: Caught signal 11. Server aborting When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xfree86.org. (II) Silicon Motion(0): Setting mode 0x03 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message