Date: Thu, 08 Jan 2009 16:31:05 -0500 From: Robert Noland <rnoland@FreeBSD.org> To: Roland Smith <rsmith@xs4all.nl> Cc: freebsd-x11 <freebsd-x11@freebsd.org>, freebsd-stable <freebsd-stable@freebsd.org> Subject: Re: Pending MFC of drm updates Message-ID: <1231450265.93079.39.camel@squirrel.corp.cox.com> In-Reply-To: <20090108212610.GA2177@slackbox.xs4all.nl> References: <1231263380.57454.23.camel@squirrel.corp.cox.com> <20090108212610.GA2177@slackbox.xs4all.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-MYtSGbZNp1dkEKMQkMcA Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Thu, 2009-01-08 at 22:26 +0100, Roland Smith wrote: > On Tue, Jan 06, 2009 at 12:36:20PM -0500, Robert Noland wrote: > > I have a patch available for testing at > > http://people.freebsd.org/~rnoland/drm-update-7-010609.patch.bz2 >=20 > Excellent! Thanks for your hard work on this, Robert!=20 >=20 > After updating my source to 7.1-RELEASE, I applied this patch and built > and installed a new kernel and world. This went without problems. >=20 > Starting X on a Sapphire Radeon X1650Pro works OK. XAA 2D accelleration > works OK. The X logfile says that direct rendering is enabled, as is > Xv. Mplayer works with Xv. >=20 > But whenever I try to start a program that uses OpenGL (i.e. glxgears) I > get the following message: >=20 > unknown chip id 0x71c1, can't guess. > libGL warning: 3D driver returned no fbconfigs. > libGL error: InitDriver failed > libGL error: reverting to (slow) indirect rendering Yep, you need the updated xorg and mesa. We are getting ready to update the ports collection. I may build up a new patch in a little while. robert. > :-( >=20 > The same number shows in Xorg.0.log: >=20 > <snip> > (--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x71c1) rev 158, = Mem @ 0xe0000000/28, 0xfe9e0000/16, I/O @ 0xd000/8, BIOS @ 0xfe9c0000/17 > <snip> > (II) Loading extension XFree86-DGA > <snip> > (--) Chipset RV535 found > <snip> > (II) RADEONHD(0): Unknown card detected: 0x71C1:0x174B:0x0880. > If - and only if - your card does not work or does not work optim= ally > please contact radeonhd@opensuse.org to help rectify this. > Use the subject: 0x71C1:0x174B:0x0880: <name of board> > and *please* describe the problems you are seeing > in your message. > (--) RADEONHD(0): Detected an RV535 on an unidentified card > (=3D=3D) RADEONHD(0): Write-combining range (0xfe9e0000,0x10000) was alre= ady clear > (II) RADEONHD(0): Mapped IO @ 0xfe9e0000 to 0x8006a2000 (size 0x00010000) > (II) RADEONHD(0): PCIE Card Detected > (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location > (II) RADEONHD(0): ATOM BIOS Rom:=20 > SubsystemVendorID: 0x174b SubsystemID: 0x0880 > IOBaseAddress: 0xd000 > Filename: 8C88GCSA.003 > BIOS Bootup Message:=20 > A67120 RV535XT VO BIOS GDDR3 600E/700M = =20 > <snip> > (II) RADEONHD(0): Found libdri 5.4.0. > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 8, (OK) > drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 8, (OK) > drmOpenByBusid: drmOpenMinor returns 8 > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > (II) RADEONHD(0): Found libdrm 1.3.0. > (II) RADEONHD(0): Found radeon drm 1.29.0. > <snip> > (II) RADEONHD(0): Output DVI-I_2/digital using initial mode 1280x1024 > (II) RADEONHD(0): RandR 1.2 support enabled > (=3D=3D) RADEONHD(0): RGB weight 888 > (=3D=3D) RADEONHD(0): Default visual is TrueColor > (=3D=3D) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0) > (II) RADEONHD(0): Using 1280x1280 Framebuffer with 1280 pitch > (II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = =3D 0x00640000) > (**) RADEONHD(0): Display dimensions: (376, 301) mm > (**) RADEONHD(0): DPI set to (86, 108) > <snip> > (II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1280x1024" 1= 08.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync >=20 > I wonder if the framebuffer size is OK? The screen is 1280x1024. That is > probably why the DPI is wacky (should both be 86). >=20 > Should I write the card in to opensuse.org? The card is a Sapphire > Radeon X1650Pro. >=20 > Additionally (but maybe unrelated), when I try to start tyr-glquake, it > bombs with an X error: >=20 > Callback: in_dgamouse ON > X Error of failed request: XF86DGANoDirectVideoMode > Major opcode of failed request: 137 (XFree86-DGA) > Minor opcode of failed request: 2 (XF86DGADirectVideo) > Serial number of failed request: 117 > Current serial number in output stream: 118 >=20 > The library libXxf86dga-1.0.2 is installed. I see Xorg loading the extens= ion. >=20 > Roland --=-MYtSGbZNp1dkEKMQkMcA Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (FreeBSD) iEYEABECAAYFAklmcJkACgkQM4TrQ4qfROPAigCeNAXgzqydaHUwSkKY1oeFxNs1 t5MAn1+TGpvU+sKem/CmQuqoKIWKuIZO =Jc00 -----END PGP SIGNATURE----- --=-MYtSGbZNp1dkEKMQkMcA--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1231450265.93079.39.camel>