Date: Thu, 30 Dec 2004 18:46:32 +1100 From: "Jon Knight" <j.knight@knightsolutions.com.au> To: <freebsd-questions@freebsd.org> Subject: RE: Ndisulator - Linksys wireless-g PCI card Project Evil Message-ID: <200412300746.iBU7kWtq027320@mail17.syd.optusnet.com.au> In-Reply-To: <200412300028.41676.james@idea-anvil.net>
next in thread | previous in thread | raw e-mail | index | archive | help
James,
No, nothing is on 10.x.x.x my lan is using 192.168.0.x
It was an example that the ndis0 does not become live.
I don't have DHCP turned on. I usually would try 192.168.0.8 but its
currently connected by cat5 in interface xl0
I tried changing to ch 10, no difference.
It is only until I try adhoc mode that it starts working - see here:
wireless# ifconfig ndis0 mediaopt adhoc
ndis0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> mtu 1500
inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
inet6 fe80::20f:66ff:fe6e:edf7%ndis0 prefixlen 64 scopeid 0x4
ether 00:0f:66:6e:ed:f7
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps <adhoc>)
status: associated
ssid linksys-jon 1:linksys-jon
channel 10 authmode OPEN powersavemode OFF powersavesleep 100
rtsthreshold 2312 protmode CTS
wepmode OFF weptxkey 1
/var/log/messages says
Dec 30 17:33:26 wireless kernel: ndis0: <Wireless-G PCI Adapter> mem
0xff000000-0xff001fff irq 10 at device 14.0 on pci0
Dec 30 17:33:26 wireless kernel: ndis0: NDIS API version: 5.0
Dec 30 17:33:26 wireless kernel: ndis0: Ethernet address: 00:0f:66:6e:ed:f7
Dec 30 17:33:26 wireless kernel: ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps
11Mbps
Dec 30 17:33:26 wireless kernel: ndis0: 11g rates: 6Mbps 9Mbps 12Mbps 18Mbps
36Mbps 48Mbps 54Mbps
Dec 30 18:44:46 wireless kernel: ndis0: link up
Dec 30 18:44:51 wireless kernel: ndis0: watchdog timeout
-----Original Message-----
From: owner-freebsd-questions@freebsd.org
[mailto:owner-freebsd-questions@freebsd.org] On Behalf Of James Jhai
Sent: Thursday, 30 December 2004 6:29 PM
To: freebsd-questions@freebsd.org
Subject: Re: Ndisulator - Linksys wireless-g PCI card Project Evil
Jon,
Is your router ip set to 10.0.0.*? Or is there a route for 10.0.0.0 on it...
Is dhcp enabled on the router? (disable it if so, I have had problems with
some dhcp not allowing ips if it didn't set them)
I noticed the channel is -1 as well, not sure if that matters...
I am far from an expert, so your have to forgive me if I am not much help.
--
- James
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200412300746.iBU7kWtq027320>