Date: Thu, 17 Jul 2003 12:47:56 -0400 From: "fbsd_user" <fbsd_user@a1poweruser.com> To: "none" <public234@nj.rr.com>, <freebsd-questions@FreeBSD.ORG> Subject: RE: Dialin problem Message-ID: <MIEPLLIBMLEEABPDBIEGCEOCEBAA.fbsd_user@a1poweruser.com> In-Reply-To: <002e01c34c6d$09908bc0$010a0a0a@desktop>
next in thread | previous in thread | raw e-mail | index | archive | help
Here is my ppp.conf file that contains notes about configuring dial
in connection. Follow imbedded instruction to enable dial in
connections.
####################################################################
##########
# /etc/ppp/ppp.conf File for dial out modem to ISP and Dial in modem
for
# connection to this FBSD system.
# Written by Joe Barbish 12/10/2001
#
# This is a working ppp.conf file I use to dial in to my ISP and to
connect
# my Win98 box by dialing in to this FBSD box and accessing the
internet.
# There are options in this ppp.conf file that I do not use, But
present them
# here for you to turn on by un-commenting the statements to meet
your needs.
#
# For Nic to DSL configuration see www.daemonnews/200101/pppoe.html
#
# This ppp.conf documentation is based on a fresh install of FBSD
4.8 with
# all file content as delivered with no user changes.
#
# NOTE Any FBSD documentation that says that the physical modem has
to have
# it's default options profile set to, NO command echo ATE0 and NO
results
# string ATQ1 and saved to the physical modems onboard non-volatile
memory
# (NVRAM) or any references to using programs tip, kermit, mgetty,
or minicom
# to perform the dial function is obsolete and out dated as of FBSD
4.0.
#
# Setup Instructions.
# Note steps 4 through 7 are only for dial in setup.
# 1. Recompile kernel and change pseudo-device tun 1 to tun 4
# GENERIC kernel defaults to 1 and you need 1 tun device for each
com port
# 2. Add gateway_enable="YES" to /etc/rc.conf so dialin connection
can gain
# access to internet.
# 3. Since a private internal IP address numbering scheme is used
for IP
# addresses behind this FBSD box the -nat option must be included
on the
# ppp command that starts the ppp task to dial the ISP.
# NAT = Network Address Translation. Changes your private
internal IP
# address to your public IP address that you get from your ISP
for
# outbound messages and does the reverse for inbound messages.
# From the command line example ppp -background -nat dialisp
# 4. Using root create file /etc/ppp/ppplogin
# Create file ppplogin with following 2 statements
# #! /bin/sh
# exec /usr/sbin/ppp -direct incoming
#
# incoming is the section label name in ppp.conf to be processed
when
# ppp is started by this script's exec command.
#
# This script will be launched by getty when it detects a ppp
dialin
# connection attempt. Program ppp belongs to group network, so
you have to
# change file ppplogin group to network and it's permissions to
read/write
# for the owner, read/execute for group, and none for everyone
else.
# chgrp network ppplogin assign file ppplogin to group
network
# chmod 650 ppplogin set permissions
# 5. Change the default section of /etc/gettytab file for automatic
ppp
# recognition by specifying the pp capability. Add following
# :pp=/etc/ppp/ppplogin:
# 6. Edit /etc/ttys to enable a getty on the port where the dialin
modem
# is attached. com2 = ttyd1 find statement like this
# ttyd1 "/usr/libexec/getty std.38400" dialup off secure
# Change off to on to activate. Verify line speed is correct
(std.38400)
# This value is defined in /etc/gettytab. After saving edited
results
# issue kill -1 1 command to spawn getty. Use ps ax to show
active tasks.
# 7. cp /usr/share/examples/ppp/ppp.secret.sample
/etc/ppp/ppp.secret
# Edit /etc/ppp/ppp.secret file adding the ID and password for
each user
# that is authorized to login to this FBSD box using dialin
modems.
# 8. TESTING Issue command ppp -background -nat dialisp to test
configuration
# Use commands ps ax to see task list. ifconfig -a to see if tun
is running
# netstat -ir to see routing. /var/log/ppp.log to view ppp log
events
# ps ax to get ppp -background task number & kill -1 number to
terminate.
# 9. Once you are done with testing, make functions permanent.
# Dial ISP at FBSD bootup. Add following to /etc/rc.conf file
# ppp_enable="YES"
# ppp_mode="ddial"
# ppp_profile="dialisp"
# ppp_nat="YES"
#
####################################################################
#########
default:
# The default section is processed ever time user ppp is started.
# Ever thing set here applies to all the following section.
set log Phase Chat LCP IPCP CCP tun command #use for testing
#set log Phase tun #use to avoid excessive
log sizes
# If 115200 connection speed does not work (it should work with any
modem newer
# that 1998) step down to 57600 or 38400 or 19200 for legacy modems.
set speed 115200 # connection speed
set timeout 0 # no idle time out, will not disconnect
disable pred1 deflate lqr # compression features & line quality
reporting
deny pred1 deflate lqr # compression features & line quality
reporting
dialisp:
# This label is used in the ppp -background -nat dialisp startup
# command for auto logon to ISP provider.
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
# Only needed for dial out device.
set device /dev/cuaa1
# This dial string is needed for ISP's which use standard Unix
style
# login.
#
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40
CONNECT"
# edit the next three lines and replace the values with
# the values which have been assigned by your ISP.
# Needed for Unix, chap, and Pap style logins.
#set phone 1111111:2222222:3333333 # if first number busy try next
number
set phone 14408560045 # only use this phone number
set authname barbishxxx
set authkey jxb7x2
set redial 10 4 # if busy redial 4 times with 10 second pause
# get dynamic IP address from ISP.
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
# set static IP address your ISP assigned to you.
# s.s.s.s = your static IP address
# g.g.g.g = IP of machine you connect to at ISP or default to
10.0.0.0/0
# set ifaddr s.s.s.s g.g.g.g 255.255.255.255 0.0.0.0
add default HISADDR # Add a (sticky) default route (Mandatory)
enable dns # Gets the ISP's DNS IP address & places them
# in resolv.conf for reference by FBSD box.
incoming:
# Configuration for dial in modem access to this FBSD system.
# This label is used in ppp -direct incoming command
# which is buried in script /etc/ppp/ppplogin that starts
# the whole process of accepting the incoming call.
# Enable passwdauth forces use of /etc/passwd file
# instead of /etc/ppp/ppp.secret file for PAP only.
# CHAP must use ppp.secret because ppp must have access to
# unencrypted passwords. This is ok over dialin modem lines.
# A unique IP address is assigned to the ttyd activated in the
# /etc/ttys/ file from the internal Private IP pool range.
# Every user that will be using PPP login must have there login ID
# in the allow user command to authorize them to run ppp.
allow users barbishxxx bob
# SECURITY WARNING - It is VITAL that either pap or chap are
enabled. If
# one or the other is not, you are allowing anybody to establish an
dialin
# ppp session with your FBSD box using any ID/password. There is no
# authentication being done on incoming ppp connections if pap or
chap is not
# enabled. SECURITY WARNING
# enable passwdauth #force pap to use passwd file
# enable chap
enable pap # uses ppp.secret file
accept dns # give dialin connection access to dns lookup
# To get access to other machines on the LAN
# enable proxy
# Assign static IP address to this dialin line
# 10.0.0.74 = static IP address for this dialin line
# 10.0.0.1 = IP address of this FBSD box
set ifaddr 10.0.0.1 10.0.0.74 255.255.255.255
# If I had 4 modems connected to com1-com4 for dialin access and
activated
# ttyd0-ttyd3 in /etc/ttys file this ppp.conf section [incoming]
will work
# as is. Set ifaddr command assigns dynamic IP address from a range
of
# reserved IP address. 10.0.0.71 through 10.0.0.74 inclusive) is the
# IP address pool reserved for dialin users.
# set ifaddr 10.0.0.1 10.0.0.71-10.0.0.74 255.255.255.0
# Activate microsoft callback feature triggered by callback phone
# numbers configured in /etc/ppp/ppp.secret (the 5th field):
#
set callback cbcp
set cbcp
set log +cbcp
set redial 3 1
set device /dev/cuaa0 /dev/cuaa1
# set speed 115200
set speed 19200 # for 14.4 externel modem
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATZ
OK-ATZ-OK \
ATDT\\T TIMEOUT 60 CONNECT"
-----Original Message-----
From: owner-freebsd-questions@freebsd.org
[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of none
Sent: Thursday, July 17, 2003 10:09 AM
To: freebsd-questions@FreeBSD.ORG
Subject: Dialin problem
Hi, if anyone has done dial-in service before
i am having is that my modem does pick up the phone when i dial in,
and the two modems establish a connection, but the OS does not do
anything there is no login prompt, i was able to send data directly
to the port and see it on the other computer with command: echo
"Hello" > /dec/cuaa0, Also i read that if getty completes the open
port process then it changes from ?? in the PS screen to something
it does not, so i am assuming that getty doesn't realize that the
connection has been established, any ideas?
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MIEPLLIBMLEEABPDBIEGCEOCEBAA.fbsd_user>