Date: Tue, 15 Jun 1999 07:12:20 -0500 From: Bryan Albright <bryana@uswest.net> To: freebsd-isdn@FreeBSD.ORG Subject: Bitsurfr Pro EZ configuration Message-ID: <19990615071220.C82414@thor.oss.uswest.net>
next in thread | raw e-mail | index | archive | help
Hi folks-- Here's my situation. I have a Motorola BitSURFR Pro EZ modem connected to a FreeBSD 3.2 box. I cannot connect to my ISP (who uses PAP) I have my ppp.conf file set up like this(it works just fine for a 56k modem): How do I modify the ppp.conf file to actually connect with PAP? (Could it possibly be that I am setting the speed too high for the one number I am dialing? Should I set the phone number to ########&######## (or even #######a&a?(where a is the last number of the telephone number))?) Or is it, as shown in the log, that I am not sending the information with the correct protocol? (deflink: his=PAP, mine=none) Thanks tons! (and then some) Bryan Albright P.S. any inconsistencies in the log file below are more than likely either typoes or the fact that I have problems decoding my wife's writing. Thanks. ######################### ### /etc/ppp/ppp.conf ### ######################### default: set log Phase Chat Connect Carrier IPCP CCP tun command set device /dev/cuaa0 set speed 115200 deny lqr set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\ dATDT\\T TIMEOUT 40 CONNECT" uswest.secure: set phone ######## set login set authname ######## set authkey ######## set timeout 600 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 delete ALL add 0 0 HISADDR uswest.mpls: set phone 672-0101 set login set authname cuy set authkey [insert password here] set timeout 600 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 delete ALL add 0 0 HISADDR ############################################## ### /var/logl/ppp.log (all typed by hand) ### ############################################## June 15 02:50:18 baldur ppp[268]: tun0: set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" June 15 02:50:18 baldur ppp[268]: tun0: set phone ######## June 15 02:50:18 baldur ppp[268]: tun0: set login June 15 02:50:18 baldur ppp[268]: tun0: set authname ######## June 15 02:50:18 baldur ppp[268]: tun0: set authkey ******** June 15 02:50:18 baldur ppp[268]: tun0: set timeout 120 June 15 02:50:18 baldur ppp[268]: tun0: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 June 15 02:50:18 baldur ppp[268]: tun0: delete ALL June 15 02:50:18 baldur ppp[268]: tun0: add 0 0 HISADDR June 15 02:50:18 baldur ppp[268]: tun0: Phase: PPP started (automode) June 15 02:50:18 baldur ppp[268]: tun0: bundle: establish June 15 02:50:18 baldur ppp[268]: tun0: deflink: closed -> opening June 15 02:50:18 baldur ppp[268]: tun0: deflink: connected! June 15 02:50:18 baldur ppp[268]: tun0: deflink: opening -> dial June 15 02:50:18 baldur ppp[268]: tun0: phase: phone: 317-4795 June 15 02:50:18 baldur ppp[268]: tun0: chat: deflink Dial attempt 1 of 1 June 15 02:50:18 baldur ppp[268]: tun0: chat: send ATZ^M June 15 02:50:18 baldur ppp[268]: tun0: chat: Expect(14) OK June 15 02:50:18 baldur ppp[268]: tun0: chat: Received: ATZ^M^M June 15 02:50:18 baldur ppp[268]: tun0: chat: Received: OK^M June 15 02:50:18 baldur ppp[268]: tun0: chat: Expect(60): CONNECT June 15 02:50:18 baldur ppp[268]: tun0: chat: Received: ATDT ########^M^M June 15 02:50:18 baldur ppp[268]: tun0: chat: Received: CONNECT 115200^M June 15 02:50:18 baldur ppp[268]: tun0: Phase: deflink: dial -> login June 15 02:50:19 baldur ppp[268]: tun0: Phase: deflink: login -> lcp June 15 02:50:19 baldur ppp[268]: tun0: Phase: Bundle: Authenticate June 15 02:50:23 baldur ppp[268]: tun0: Phase: deflink: his=PAP, mine=none June 15 02:50:23 baldur ppp[268]: tun0: Phase: pap output: ######## ******** June 15 02:50:25 baldur ppp[268]: tun0: Phase: deflink: his=PAP, mine=none June 15 02:50:25 baldur ppp[268]: tun0: Phase: pap output: ######## ******** June 15 02:50:28 baldur ppp[268]: tun0: Phase: deflink: his=PAP, mine=none June 15 02:50:28 baldur ppp[268]: tun0: Phase: pap output: ######## ******** -- +------------------------+------------------------+ | Bryan Albright | bryana@uswest.net | +------------------------+------------------------+ | Man who live in glass house, dress in basement. | +-------------------------------------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990615071220.C82414>