Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 12 Jun 2003 21:54:23 -0500
From:      Manuel Rabade - MiG <mig@mig-29.net>
To:        Jason <jason@monsterjam.org>
Cc:        questions@freebsd.org
Subject:   Re: wine/freebsd/kazaa.. (fwd)
Message-ID:  <20030613025423.GC344@mig-29.net>
In-Reply-To: <20030612223358.U3876@monsterjam.org>
References:  <20030612185019.S3418@monsterjam.org> <20030613013125.GB344@mig-29.net> <20030612223358.U3876@monsterjam.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jun 12, 2003 at 10:41:59PM -0400, Jason wrote:
> hmmm.. you must have used the same resource I did..

I have seen a lot of resources, and theres is only one constant
between them, they are diferents =P.

So i decied to use the minimun number of dll's and it works =P.

> BUT the one i was using was missing the
>        "rasapi32" = "native"
> I downloaded that file and added it to the wine config..
> 
> I re-ran the install and that absolutely fixed the problem with the
> > > err:module:BUILTIN32_dlopen failed to load .so lib for builtin
> > > msacm.imaadpcm: Cannot open "/usr/local/lib/wine/msacm.imaadpcm.so"
> > > err:module:BUILTIN32_dlopen failed to load .so lib for builtin
> > > msacm.msadpcm: Cannot open "/usr/local/lib/wine/msacm.msadpcm.so"
> 
> 
> but now I get the following:
> 
> [root@beast]# wine ./kazaalite.exe
> Could not stat /mnt/fd0 (No such file or directory), ignoring drive A:
> fixme:cdrom:CDROM_GetIdeInterface not implemented for BSD
> fixme:reg:GetSystemInfo not yet supported on this system
> 
> after I click the final "install" button in the kazaa lite 1.7.2 install,
> the window goes away and the install seems to hang..
> 
> any ideas on that?
> 

Remove the entry in the .wine/config about the floppy and cdrom and try again.

> 
> Jason
> 
> 
> --
> The bureaucracy is expanding to meet the needs of an expanding
> bureaucracy.
> 
> On Thu, 12 Jun 2003, Manuel Rabade - MiG wrote:
> 
> > How do you run wine ?? with a "fake windows" or with a current windows instalation?
> >
> > In my case i run wine with a fake windows drive (.wine/c/) and i have to do the
> > followin steps to get kazaa working in freebsd:
> >
> > - Copy this dlls from a windows instalation to .wine/c/Windows/System
> > 	comctl32.dll
> > 	commctrl.dll
> > 	shdoclc.dll
> > 	shlwapi.dll
> > 	wininet.dll
> > 	comdlg32.dll
> > 	msvcrt.dll
> > 	shdocvw.dll
> > 	urlmon.dll
> > - Add to .wine/config the following:
> >
> > 	[AppDefaults\\Kazaa.exe\\DllOverrides]
> > 	"commctrl" = "native"
> > 	"comctl32" = "native"
> > 	"comdlg32" = "native"
> > 	"msvcrt" = "native"
> > 	"shdoclc" = "native"
> > 	"shdocvw" = "native"
> > 	"shlwapi" = "native"
> > 	"urlmon" = "native"
> > 	"wininet" = "native"
> > 	"rasapi32" = "native"
> >
> > - Run the instalation of Kazza (i am currently working with Kazaa Lite Retro
> > Edition 1.7.2, i tired to install Kazaa Lite 2.x but seems to be a problem
> > with the port of wine, and i can't run Kazaa 2.x, but a friend can run it
> > on Linux).
> >
> > - Enjoy it กก, to run Kazaa:
> >
> > wine $HOME/.wine/c/Windows/Program Files/Kazaa Lite/Kazaa.exe
> >
> >
> > Note: to get working the initial config and all the hierarchy of the fake
> > windows, you could try to install 'linux-winetools' (also in ports), and
> > create the initial .wine hierarchy and config file with it.
> >
> > In one month i will make a guide of this and publish it.
> >
> > Also i have a tgz with the .wine directory with dll's, config file and kazaa already
> > installed, (ready to untar it and run kazaa), if you want this, drop me a line (in
> > a month i will put it online also).
> >
> >
> > On Thu, Jun 12, 2003 at 06:51:40PM -0400, Jason wrote:
> > > nobody knows? I asked the wine-users list twice and nobody there answered
> > > either.
> > >
> > > ---------- Forwarded message ----------
> > > Date: Tue, 10 Jun 2003 20:18:55 -0400 (EDT)
> > > To: questions@freebsd.org
> > > Subject: wine/freebsd/kazaa.. (fwd)
> > >
> > >
> > > freebsd fans.. running freebsd 4.8-stable and have
> > > installed wine from
> > > the ports. Wine-20030508.tar.gz
> > > It installed fine and I can run notepad with no problems..
> > > Im running the kazaalite install binary for windows and it gets so far..
> > > then it bombs out with
> > >
> > > err:module:BUILTIN32_dlopen failed to load .so lib for builtin
> > > msacm.imaadpcm: Cannot open "/usr/local/lib/wine/msacm.imaadpcm.so"
> > > err:module:BUILTIN32_dlopen failed to load .so lib for builtin
> > > msacm.msadpcm: Cannot open "/usr/local/lib/wine/msacm.msadpcm.so"
> > >
> > > (I cannot find those files on my system anywhere. btw. where should they
> > > come from?)
> > >
> > > I cant find anything useful on google/usenet about this. any ideas?
> > >
> > > regards,
> > > Jason
> > > --
> > > 43rd Law of Computing:
> > > 	Anything that can go wr
> > > fortune: Segmentation violation -- Core dumped
> > > _______________________________________________
> > > wine-users mailing list
> > > wine-users@winehq.com
> > > http://www.winehq.com/mailman/listinfo/wine-users
> > > _______________________________________________
> > > freebsd-questions@freebsd.org mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
> >
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030613025423.GC344>