Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 4 Sep 2006 17:54:26 -0400
From:      Andrew <itandrew@gmail.com>
To:        "Indigo 23" <indigo23@gmail.com>
Cc:        freebsd-stable@freebsd.org, freebsd-usb@freebsd.org
Subject:   Re: Problems with Mitsumi 7-in-1 USB Card Reader/Floppy combo
Message-ID:  <aaf2bc490609041454s4f6bad89h73539572fe23cb9b@mail.gmail.com>
In-Reply-To: <6f50eac40609041246q5b61b22fm57fe60711b4643fd@mail.gmail.com>
References:  <6f50eac40608051611n7744a00cy79eeae6d8f83cc92@mail.gmail.com> <6f50eac40609041246q5b61b22fm57fe60711b4643fd@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Try turning off ACPI and see if that helps.  It's option 2 as freebsd is
starting up.  If it solves the problem you can make the change perm.

Thanks,

Andrew


On 9/4/06, Indigo 23 <indigo23@gmail.com> wrote:
>
> Hello.  I recently hooked up a Mitsumi 7-in-1 USB Card Reader/Floppy
> drive to my computer and ever since then, I cannot boot FreeBSD.  I
> have an ASUS P5ND2-SLI motherboard (nForce 4), and the card reader is
> hooked up to the internal USB on the motherboard itself.  Also, my
> machine has a dual core processor, therefore SMP is enabled in my
> kernel.  When I try booting (from hard drive or install disc), I get
> the following error:
>
> "panic: ohci_add_done: addr 0x000d1c40 not found
> cpuid=0"
>
> After that error, all I can do is reboot.  Also, of importance to
> note, if I disconnect the card reader, I can boot fine.
>
> I am not subscribed to this mailing list, so please CC all replies to
> my address.
>
> Thanks.
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?aaf2bc490609041454s4f6bad89h73539572fe23cb9b>