Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 21 May 2001 08:57:02 -0700 (PDT)
From:      Matthew Jacob <mjacob@feral.com>
To:        Wilko Bulte <wkb@freebie.demon.nl>
Cc:        freebsd-alpha@FreeBSD.ORG
Subject:   Re: 4.3R on big hulking Tlaser..
Message-ID:  <Pine.LNX.4.21.0105210856430.9142-100000@zeppo.feral.com>
In-Reply-To: <E151rwo-000GPN-00@post.mail.nl.demon.net>

next in thread | previous in thread | raw e-mail | index | archive | help

Hey! Alright!

I haven't, btw, checked SMP on the TLASER yet.

> Hi,
> 
> Finally found some time to 'dd' the 2 Mbyte floppy image to a SCSI
> disk and boot the 8-cpu AS8400 from that disk. As you can see below 
> that worked fine. It is currently installing from CDROM. I'll
> have it do a buildworld overnight. 
> 
> I hope to go to -current pretty soon, as the other 7 CPUs feel so bored ;)
> It is currently only 256MB of RAM, the other 3 memory modules are 4GB a piece
> and therefore too big for FreeBSD's taste.
> 
> I have to check on the KZPAA (NCR810), the console also has
> problems using the CDROM attached to it. 
> 
> cheers,
> Wilko
> 
> 
> Script started on Mon May 21 15:04:19 2001
> chuck#telnet dsrv2 2001
> Trying 172.16.10.51...
> Connected to dsrv2.
> Escape character is '^]'.
> e8.e7.e6.e5.e3.
> 
> F   E   D   C   B   A   9   8   7   6   5   4   3   2   1   0   NODE #
>                             A   .   .   M   .   P   P   P   P   TYP
>                             o   .   .   +   .  ++  ++  ++  ++   ST1
>                             .   .   .   .   .  EE  EE  EE  EB   BPD
>                             o   .   .   +   .  ++  ++  ++  ++   ST2
>                             .   .   .   .   .  EE  EE  EE  EB   BPD
> c3.e2.e0.ce.cd.cb.de.ca.c9.c8.
>                                                   
> 
> c7.c5.c4.c3.dd.dc.db.da.d9.
>                             +   .   .   +   .  ++  ++  ++  ++   ST3
>                             .   .   .   .   .  EE  EE  EE  EB   BPD
> d8.d7.d6.d5.d4.
>                                 
> 
>                 .   .   .   +   +   +   +   .   +   .   .   .   C0 PCI +
>                 .   .   .   .   .   .   .   .   +   .   .   .   C1 PCI +
>                 .   +   .   .   .   .   .   .   +   .   .   .   C2 PCI +
>                 .   +   .   .   .   .   .   .   +   .   .   .   C3 PCI +
> 
>                             .   .   .  A0   .   .   .   .   .   ILV
>                             .   .   . 256   .   .   .   .   .   256MB
> AlphaServer 8400 8-5/625/4, Console V5.8-2 21-JUL-2000 16:30:31
> SROM V3.1, OpenVMS PALcode V1.21-1, Tru64 UNIX PALcode V1.23-1
> System Serial = AY60323611, OS = UNIX, 15:01:17  May 21, 2001
> Configuring I/O adapters...
> isp0, slot 3, bus 0, hose0
> tulip0, slot 5, bus 0, hose0
> kzpaa0, slot 6, bus 0, hose0
> isp1, slot 7, bus 0, hose0
> tulip1, slot 8, bus 0, hose0
> isp2, slot 3, bus 0, hose1
> kzpsa0, slot 3, bus 0, hose2
> kgpsa0, slot 10, bus 0, hose2
> kzpsa1, slot 3, bus 0, hose3
> kgpsa1, slot 10, bus 0, hose3
> Configuration completed
> Checking system information
> P00>>>sho dev
> polling for units on isp0, slot 3, bus 0, hose0...
> pka.7.0.3.0        pka       term on     Bus ID 7  5.57
> polling for units on kzpaa0, slot 6, bus 0, hose0...
> pkb.7.0.6.0        pkb                   Bus ID 7
> polling for units on isp1, slot 7, bus 0, hose0...
> pkc.7.0.7.0        pkc       term on     Bus ID 7  5.57
> dkc100.1.0.7.0     DKC100                   RZ29B  0014
> polling for units on isp2, slot 3, bus 0, hose1...
> pkd.7.0.3.1        pkd       term off    Bus ID 7  5.57
> dkd100.1.0.3.1     DKD100                   RZ29B  0014
> dkd200.2.0.3.1     DKD200                   RZ29B  0014
> dkd300.3.0.3.1     DKD300                   RZ29B  0014
> dkd400.4.0.3.1     DKD400                   RZ29B  0014
> dkd500.5.0.3.1     DKD500                   RZ28D  0008
> polling for units on kzpsa0, slot 3, bus 0, hose2...
> pke.7.0.3.2        pke     TPwr 1 Fast 1 Bus ID 7   N01  A12    
> polling for units on kgpsa0, slot 10, bus 0, hose2...
> kgpsaa0.0.0.10.2 - LINK_DOWN timeout
> kgpsaa0.0.0.10.2           PGA0        WWN 1000-0000-c921-7fa8
> kgpsaa0.0.0.10.2 Link is down.
> polling for units on kzpsa1, slot 3, bus 0, hose3...
> pkf.7.0.3.3        pkf     TPwr 1 Fast 1 Bus ID 7   N01  A12    
> polling for units on kgpsa1, slot 10, bus 0, hose3...
> kgpsab0.0.0.10.3 - LINK_DOWN timeout
> kgpsab0.0.0.10.3           PGB0        WWN 1000-0000-c921-7ea0
> kgpsab0.0.0.10.3 Link is down.
> P00>>>boot dkc100
> (boot dkc100.1.0.7.0 -flags a)
> SRM boot identifier: scsi 0 7 0 1 100 ef00 10201077
> boot adapter: isp1  rev 5 in bus slot 7 off of kftha0 in TLSB slot 8
> block 0 of dkc100.1.0.7.0 is a valid boot block
> reading 15 blocks from dkc100.1.0.7.0
> bootstrap code read in
> Building FRU table.......
> FRU table size = 3997(14743)
> base = 200000, image_start = 0, image_bytes = 1e00
> initializing HWRPB at 2000
> initializing page table at 1f0000
> initializing machine state
> setting affinity to the primary CPU
> Switch to OSF PAL code succeeded.
> 
> FreeBSD/alpha SRM disk boot, Revision 1.0
> (root@jkh101.osd.bsdi.com, Sat Apr 21 20:20:13 GMT 2001)
> Memory: 262144 k
> |/-\|/-\|/-\|/-\|/-\|
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [kernel] in 9 seconds... 
> Booting [kernel]...               
> /-\|/-Entering kernel at 0xfffffc000032b8c0...
> Copyright (c) 1992-2001 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 4.3-RELEASE #1: Sun Apr 22 02:16:27 GMT 2001
>     root@jkh101.osd.bsdi.com:/usr/src/sys/compile/BOOTMFS
> AlphaServer 8400
> AlphaServer 8400 5/625, 612MHz
> 8192 byte page size, 8 processors.
> CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
> OSF PAL rev: 0x10000100020117
> real memory  = 265650176 (259424K bytes)
> avail memory = 250814464 (244936K bytes)
> Preloaded elf kernel "kernel" at 0xfffffc0000924000.
> md1: Malloc disk
> tlsbcpu0: <Dual CPU, 4MB cache> at tlsb0 node 0
> gbus0 on tlsbcpu0
> zsc0: <Z8530 uart> on gbus0 offset 0x10000000
> zs0 on zsc0 channel A
> zs1 on zsc0 channel B
> mcclock0: <MC146818A real time clock> on gbus0 offset 0x20000000
> tlsbcpu1: <Dual CPU, 4MB cache> at tlsb0 node 0
> tlsbcpu2: <Dual CPU, 4MB cache> at tlsb0 node 1
> tlsbcpu3: <Dual CPU, 4MB cache> at tlsb0 node 1
> tlsbcpu4: <Dual CPU, 4MB cache> at tlsb0 node 2
> tlsbcpu5: <Dual CPU, 4MB cache> at tlsb0 node 2
> tlsbcpu6: <Dual CPU, 4MB cache> at tlsb0 node 3
> tlsbcpu7: <Dual CPU, 4MB cache> at tlsb0 node 3
> tlsbmem0: <MS7CC Memory Module> at tlsb0 node 5
> kft0: <KFTHA I/O interface> at tlsb0 node 8
> dwlpx0: <DWLPA PCI adapter> on kft0 hose 0
> pci0: <PCI bus> on pcib0
> isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x87fffb00-0x87fffbff mem
> 0x87f9e000-0x87f9efff irq 12 at device 3.0 on pci0
> isp0: Node 8 Hose 0 Slot 3 interrupting at TLSB vector 0x8403 intpin 1
> de0: <Digital 21040 Ethernet> port 0x87fffc00-0x87fffc7f mem 0x87f9dd00-0x87f9dd7f irq 20
> at device 5.0 on pci0
> de0: Node 8 Hose 0 Slot 5 interrupting at TLSB vector 0x8405 intpin 1
> de0: DEC 21040 [10Mb/s] pass 2.3
> de0: address 00:00:f8:20:3b:7b
> sym0: <810> port 0x87fffd00-0x87fffdff mem 0x87f9de00-0x87f9deff irq 24 at device 6.0 on
> pci0
> sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
> CACHE TEST FAILED: host wrote 1, chip read 38275456.
> CACHE TEST FAILED: chip wrote 2, host read 0.
> sym0: CACHE INCORRECTLY CONFIGURED.
> device_probe_and_attach: sym0 attach returned 6
> isp1: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x87fffe00-0x87fffeff mem
> 0x87f9f000-0x87f9ffff irq 28 at device 7.0 on pci0
> isp1: Node 8 Hose 0 Slot 7 interrupting at TLSB vector 0x8407 intpin 1
> de1: <Digital 21140A Fast Ethernet> port 0x87ffff00-0x87ffff7f mem 0x87f9df00-0x87f9df7f
> irq 32 at device 8.0 on pci0
> de1: Node 8 Hose 0 Slot 8 interrupting at TLSB vector 0x8408 intpin 1
> de1: DEC DE500-AA 21140A [10-100Mb/s] pass 2.2
> de1: address 00:00:f8:1a:9a:68
> de1: enabling 100baseTX port
> dwlpx1: <DWLPA PCI adapter> on kft0 hose 1
> pci16: <PCI bus> on pcib1
> isp2: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8fffff00-0x8fffffff mem
> 0x8ffef000-0x8ffeffff irq 12 at device 3.0 on pci16
> isp2: Node 8 Hose 1 Slot 3 interrupting at TLSB vector 0x8413 intpin 1
> dwlpx2: <DWLPA PCI adapter> on kft0 hose 2
> pci32: <PCI bus> on pcib2
> pci32: <unknown card> (vendor=0x1011, dev=0x0008) at 3.0 irq 12
> pci32: <unknown card> (vendor=0x10df, dev=0xf700) at 10.0 irq 40
> dwlpx3: <DWLPA PCI adapter> on kft0 hose 3
> pci48: <PCI bus> on pcib3
> pci48: <unknown card> (vendor=0x1011, dev=0x0008) at 3.0 irq 12
> pci48: <unknown card> (vendor=0x10df, dev=0xf700) at 10.0 irq 40
> Timecounter "alpha"  frequency 611787624 Hz
> Waiting 15 seconds for SCSI devices to settle
> de0: autosense failed: cable problem?
> Mounting root from ufs:/dev/md0c
> da0 at isp1 bus 0 target 1 lun 0
> da0: <DEC RZ29B    (C) DEC 0014> Fixed Direct Access SCSI-2 device 
> da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
> da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
> da1 at isp2 bus 0 target 1 lun 0
> da1: <DEC RZ29B    (C) DEC 0014> Fixed Direct Access SCSI-2 device 
> da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
> da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
> da4 at isp2 bus 0 target 4 lun 0
> da4: <DEC RZ29B    (C) DEC 0014> Fixed Direct Access SCSI-2 device 
> da4: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
> da4: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
> da5 at isp2 bus 0 target 5 lun 0
> da5: <DEC RZ28D    (C) DEC 0008> Fixed Direct Access SCSI-2 device 
> da5: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
> da5: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
> da3 at isp2 bus 0 target 3 lun 0
> da3: <DEC RZ29B    (C) DEC 0014> Fixed Direct Access SCSI-2 device 
> da3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
> da3: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
> da2 at isp2 bus 0 target 2 lun 0
> da2: <DEC RZ29B    (C) DEC 0014> Fixed Direct Access SCSI-2 device 
> da2: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
> da2: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
> WARNING: clock lost 17561 days -- CHECK AND RESET THE DATE!
> /stand/sysinstall running as init on serial console
> 
> These are the predefined terminal types available to
> sysinstall when running stand-alone.  Please choose the
> closest match for your particular terminal.
> 
> 1 ...................... Standard ANSI terminal.
> 
> 
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0105210856430.9142-100000>