From owner-freebsd-alpha Mon May 21 8:57:24 2001 Delivered-To: freebsd-alpha@freebsd.org Received: from feral.com (mailhost.feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id D131E37B424 for ; Mon, 21 May 2001 08:57:14 -0700 (PDT) (envelope-from mjacob@feral.com) Received: from zeppo.feral.com (IDENT:mjacob@zeppo [192.67.166.71]) by feral.com (8.9.3/8.9.3) with ESMTP id IAA02375; Mon, 21 May 2001 08:57:02 -0700 Date: Mon, 21 May 2001 08:57:02 -0700 (PDT) From: Matthew Jacob Reply-To: mjacob@feral.com To: Wilko Bulte Cc: freebsd-alpha@FreeBSD.ORG Subject: Re: 4.3R on big hulking Tlaser.. In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hey! Alright! I haven't, btw, checked SMP on the TLASER yet. > Hi, > > Finally found some time to 'dd' the 2 Mbyte floppy image to a SCSI > disk and boot the 8-cpu AS8400 from that disk. As you can see below > that worked fine. It is currently installing from CDROM. I'll > have it do a buildworld overnight. > > I hope to go to -current pretty soon, as the other 7 CPUs feel so bored ;) > It is currently only 256MB of RAM, the other 3 memory modules are 4GB a piece > and therefore too big for FreeBSD's taste. > > I have to check on the KZPAA (NCR810), the console also has > problems using the CDROM attached to it. > > cheers, > Wilko > > > Script started on Mon May 21 15:04:19 2001 > chuck#telnet dsrv2 2001 > Trying 172.16.10.51... > Connected to dsrv2. > Escape character is '^]'. > e8.e7.e6.e5.e3. > > F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE # > A . . M . P P P P TYP > o . . + . ++ ++ ++ ++ ST1 > . . . . . EE EE EE EB BPD > o . . + . ++ ++ ++ ++ ST2 > . . . . . EE EE EE EB BPD > c3.e2.e0.ce.cd.cb.de.ca.c9.c8. > > > c7.c5.c4.c3.dd.dc.db.da.d9. > + . . + . ++ ++ ++ ++ ST3 > . . . . . EE EE EE EB BPD > d8.d7.d6.d5.d4. > > > . . . + + + + . + . . . C0 PCI + > . . . . . . . . + . . . C1 PCI + > . + . . . . . . + . . . C2 PCI + > . + . . . . . . + . . . C3 PCI + > > . . . A0 . . . . . ILV > . . . 256 . . . . . 256MB > AlphaServer 8400 8-5/625/4, Console V5.8-2 21-JUL-2000 16:30:31 > SROM V3.1, OpenVMS PALcode V1.21-1, Tru64 UNIX PALcode V1.23-1 > System Serial = AY60323611, OS = UNIX, 15:01:17 May 21, 2001 > Configuring I/O adapters... > isp0, slot 3, bus 0, hose0 > tulip0, slot 5, bus 0, hose0 > kzpaa0, slot 6, bus 0, hose0 > isp1, slot 7, bus 0, hose0 > tulip1, slot 8, bus 0, hose0 > isp2, slot 3, bus 0, hose1 > kzpsa0, slot 3, bus 0, hose2 > kgpsa0, slot 10, bus 0, hose2 > kzpsa1, slot 3, bus 0, hose3 > kgpsa1, slot 10, bus 0, hose3 > Configuration completed > Checking system information > P00>>>sho dev > polling for units on isp0, slot 3, bus 0, hose0... > pka.7.0.3.0 pka term on Bus ID 7 5.57 > polling for units on kzpaa0, slot 6, bus 0, hose0... > pkb.7.0.6.0 pkb Bus ID 7 > polling for units on isp1, slot 7, bus 0, hose0... > pkc.7.0.7.0 pkc term on Bus ID 7 5.57 > dkc100.1.0.7.0 DKC100 RZ29B 0014 > polling for units on isp2, slot 3, bus 0, hose1... > pkd.7.0.3.1 pkd term off Bus ID 7 5.57 > dkd100.1.0.3.1 DKD100 RZ29B 0014 > dkd200.2.0.3.1 DKD200 RZ29B 0014 > dkd300.3.0.3.1 DKD300 RZ29B 0014 > dkd400.4.0.3.1 DKD400 RZ29B 0014 > dkd500.5.0.3.1 DKD500 RZ28D 0008 > polling for units on kzpsa0, slot 3, bus 0, hose2... > pke.7.0.3.2 pke TPwr 1 Fast 1 Bus ID 7 N01 A12 > polling for units on kgpsa0, slot 10, bus 0, hose2... > kgpsaa0.0.0.10.2 - LINK_DOWN timeout > kgpsaa0.0.0.10.2 PGA0 WWN 1000-0000-c921-7fa8 > kgpsaa0.0.0.10.2 Link is down. > polling for units on kzpsa1, slot 3, bus 0, hose3... > pkf.7.0.3.3 pkf TPwr 1 Fast 1 Bus ID 7 N01 A12 > polling for units on kgpsa1, slot 10, bus 0, hose3... > kgpsab0.0.0.10.3 - LINK_DOWN timeout > kgpsab0.0.0.10.3 PGB0 WWN 1000-0000-c921-7ea0 > kgpsab0.0.0.10.3 Link is down. > P00>>>boot dkc100 > (boot dkc100.1.0.7.0 -flags a) > SRM boot identifier: scsi 0 7 0 1 100 ef00 10201077 > boot adapter: isp1 rev 5 in bus slot 7 off of kftha0 in TLSB slot 8 > block 0 of dkc100.1.0.7.0 is a valid boot block > reading 15 blocks from dkc100.1.0.7.0 > bootstrap code read in > Building FRU table....... > FRU table size = 3997(14743) > base = 200000, image_start = 0, image_bytes = 1e00 > initializing HWRPB at 2000 > initializing page table at 1f0000 > initializing machine state > setting affinity to the primary CPU > Switch to OSF PAL code succeeded. > > FreeBSD/alpha SRM disk boot, Revision 1.0 > (root@jkh101.osd.bsdi.com, Sat Apr 21 20:20:13 GMT 2001) > Memory: 262144 k > |/-\|/-\|/-\|/-\|/-\| > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [kernel] in 9 seconds... > Booting [kernel]... > /-\|/-Entering kernel at 0xfffffc000032b8c0... > Copyright (c) 1992-2001 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.3-RELEASE #1: Sun Apr 22 02:16:27 GMT 2001 > root@jkh101.osd.bsdi.com:/usr/src/sys/compile/BOOTMFS > AlphaServer 8400 > AlphaServer 8400 5/625, 612MHz > 8192 byte page size, 8 processors. > CPU: EV56 (21164A) major=7 minor=2 extensions=0x1 > OSF PAL rev: 0x10000100020117 > real memory = 265650176 (259424K bytes) > avail memory = 250814464 (244936K bytes) > Preloaded elf kernel "kernel" at 0xfffffc0000924000. > md1: Malloc disk > tlsbcpu0: at tlsb0 node 0 > gbus0 on tlsbcpu0 > zsc0: on gbus0 offset 0x10000000 > zs0 on zsc0 channel A > zs1 on zsc0 channel B > mcclock0: on gbus0 offset 0x20000000 > tlsbcpu1: at tlsb0 node 0 > tlsbcpu2: at tlsb0 node 1 > tlsbcpu3: at tlsb0 node 1 > tlsbcpu4: at tlsb0 node 2 > tlsbcpu5: at tlsb0 node 2 > tlsbcpu6: at tlsb0 node 3 > tlsbcpu7: at tlsb0 node 3 > tlsbmem0: at tlsb0 node 5 > kft0: at tlsb0 node 8 > dwlpx0: on kft0 hose 0 > pci0: on pcib0 > isp0: port 0x87fffb00-0x87fffbff mem > 0x87f9e000-0x87f9efff irq 12 at device 3.0 on pci0 > isp0: Node 8 Hose 0 Slot 3 interrupting at TLSB vector 0x8403 intpin 1 > de0: port 0x87fffc00-0x87fffc7f mem 0x87f9dd00-0x87f9dd7f irq 20 > at device 5.0 on pci0 > de0: Node 8 Hose 0 Slot 5 interrupting at TLSB vector 0x8405 intpin 1 > de0: DEC 21040 [10Mb/s] pass 2.3 > de0: address 00:00:f8:20:3b:7b > sym0: <810> port 0x87fffd00-0x87fffdff mem 0x87f9de00-0x87f9deff irq 24 at device 6.0 on > pci0 > sym0: No NVRAM, ID 7, Fast-10, SE, parity checking > CACHE TEST FAILED: host wrote 1, chip read 38275456. > CACHE TEST FAILED: chip wrote 2, host read 0. > sym0: CACHE INCORRECTLY CONFIGURED. > device_probe_and_attach: sym0 attach returned 6 > isp1: port 0x87fffe00-0x87fffeff mem > 0x87f9f000-0x87f9ffff irq 28 at device 7.0 on pci0 > isp1: Node 8 Hose 0 Slot 7 interrupting at TLSB vector 0x8407 intpin 1 > de1: port 0x87ffff00-0x87ffff7f mem 0x87f9df00-0x87f9df7f > irq 32 at device 8.0 on pci0 > de1: Node 8 Hose 0 Slot 8 interrupting at TLSB vector 0x8408 intpin 1 > de1: DEC DE500-AA 21140A [10-100Mb/s] pass 2.2 > de1: address 00:00:f8:1a:9a:68 > de1: enabling 100baseTX port > dwlpx1: on kft0 hose 1 > pci16: on pcib1 > isp2: port 0x8fffff00-0x8fffffff mem > 0x8ffef000-0x8ffeffff irq 12 at device 3.0 on pci16 > isp2: Node 8 Hose 1 Slot 3 interrupting at TLSB vector 0x8413 intpin 1 > dwlpx2: on kft0 hose 2 > pci32: on pcib2 > pci32: (vendor=0x1011, dev=0x0008) at 3.0 irq 12 > pci32: (vendor=0x10df, dev=0xf700) at 10.0 irq 40 > dwlpx3: on kft0 hose 3 > pci48: on pcib3 > pci48: (vendor=0x1011, dev=0x0008) at 3.0 irq 12 > pci48: (vendor=0x10df, dev=0xf700) at 10.0 irq 40 > Timecounter "alpha" frequency 611787624 Hz > Waiting 15 seconds for SCSI devices to settle > de0: autosense failed: cable problem? > Mounting root from ufs:/dev/md0c > da0 at isp1 bus 0 target 1 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled > da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) > da1 at isp2 bus 0 target 1 lun 0 > da1: Fixed Direct Access SCSI-2 device > da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled > da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) > da4 at isp2 bus 0 target 4 lun 0 > da4: Fixed Direct Access SCSI-2 device > da4: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled > da4: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) > da5 at isp2 bus 0 target 5 lun 0 > da5: Fixed Direct Access SCSI-2 device > da5: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled > da5: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) > da3 at isp2 bus 0 target 3 lun 0 > da3: Fixed Direct Access SCSI-2 device > da3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled > da3: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) > da2 at isp2 bus 0 target 2 lun 0 > da2: Fixed Direct Access SCSI-2 device > da2: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled > da2: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) > WARNING: clock lost 17561 days -- CHECK AND RESET THE DATE! > /stand/sysinstall running as init on serial console > > These are the predefined terminal types available to > sysinstall when running stand-alone. Please choose the > closest match for your particular terminal. > > 1 ...................... Standard ANSI terminal. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message