From owner-freebsd-hardware Mon Jul 29 05:32:25 1996 Return-Path: owner-hardware Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id FAA23254 for hardware-outgoing; Mon, 29 Jul 1996 05:32:25 -0700 (PDT) Received: from tav.kiev.ua (tav-sita.sita.kiev.ua [193.124.50.39]) by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id FAA23177 for ; Mon, 29 Jul 1996 05:31:21 -0700 (PDT) Received: (from helg@localhost) by tav.kiev.ua (8.6.12/8.6.12) id PAA05460; Mon, 29 Jul 1996 15:07:33 +0300 Date: Mon, 29 Jul 1996 15:07:33 +0300 From: Oleg N Panashchenko Message-Id: <199607291207.PAA05460@tav.kiev.ua> To: brett@lariat.org (Brett Glass) Subject: Re: DigiBoard driver: How to use with X/em? Cc: freebsd-hardware@freebsd.org Organization: Maxis Labs X-Newsreader: TIN [version 1.2 PL2] Sender: owner-hardware@freebsd.org X-Loop: FreeBSD.org Precedence: bulk brett@lariat.org (Brett Glass) wrote: : I have here a brand-spanking-new DigiBoard PC/Xem intelligent serial : card, plus a cable and a box with 16 RS-232 connectors. However, I can't : seem to get them working with the FreeBSD DigiBoard driver. When I build : and boot from a kernel with the dgb driver installed, I get: : dgb0: PC/Xi 512K : dgb0 at 0x204-0x207 maddr 0xfc0000 msize 524288 on isa : dgb0: 2nd reset failed : and the ports don't work. It looks as if the card is recognized; however, : the second message suggests a hardware problem. Does anybody have any docs or poiters to them about difference between PC/Xe and PC/Xem models? If these models are not too different, I can try to modify driver to make it working with PC/Xem. Oleg