Date: Wed, 29 Dec 2021 00:25:10 +0100 From: FreeBSD User <freebsd@walstatt-de.de> To: Marc Fonvieille <blackend@freebsd.org> Cc: Andrew Stevenson <andrew@ugh.net.au>, freebsd-embedded@freebsd.org, FreeBSD CURRENT <freebsd-current@freebsd.org> Subject: Re: Arduino IDF -> make/automake based environment Message-ID: <20211229002510.2e2c9cb0@hermann> In-Reply-To: <YcCGjt6toaENVLLl@emphyrio.blackend.org> References: <20211219120947.75530a82@hermann> <0024BDB4-ABFE-4DAE-BC99-0AF43F8B3180@ugh.net.au> <YcCGjt6toaENVLLl@emphyrio.blackend.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 20 Dec 2021 14:35:10 +0100 Marc Fonvieille <blackend@freebsd.org> wrote: > Le 19.12.2021 21:03, Andrew Stevenson a =E9crit : > >=20 > > =20 > > > On 19. Dec 2021, at 12:18, FreeBSD User <freebsd@walstatt-de.de> wrot= e: > > >=20 > > > environment. Since I'm interested in coding for some smaller AMTEL MC= Us and ESP32 > > > and like to digg a bit deeper than simply clicking a host base from a= menu, I'm not > > > afraid of doing some larger basic setup if needed. =20 > >=20 > > If by small AMTEL MCUs you mean AVRs then avr-gcc and avrdude are in po= rts. > > =20 >=20 > For ESP32, you should look at: > https://wiki.freebsd.org/electronics/arduino/esp32 Following these instructions with the most recent required ports on the lat= est 13-STABLE, results in an linker error: /usr/local/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../= ../xtensa-esp32-elf/bin/ld: cannot find crt1-sim.o: No such file or directory /usr/local/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../= ../xtensa-esp32-elf/bin/ld: cannot find _vectors.o: No such file or directory collect2: error: ld returned 1 exit status > and > https://forums.freebsd.org/threads/a-guide-for-installing-esp32-board-for= -arduino-on-freebsd12-update-2021-08-17.78408/ >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20211229002510.2e2c9cb0>