Date: Mon, 27 May 2002 21:35:25 +0200 From: "Arvid Elstrodt" <arvid@elstrodt.com> To: <hm@kts.org> Cc: <freebsd-isdn@FreeBSD.ORG> Subject: Re: FreeBSD 4.6 RC2, Dynalink IS64PH ISA PnP card: "Can't assign resources" ?? Message-ID: <00f301c205b5$b1540c10$0102211f@ENMCARVID> References: <20020527134706.43A5F549C@bert.kts.org>
next in thread | previous in thread | raw e-mail | index | archive | help
----- Original Message -----
From: "Hellmuth Michaelis" <hm@kts.org>
To: "Arvid Elstrodt" <arvid@elstrodt.com>
Cc: "Gary Jennejohn" <garyj@jennejohn.org>; <freebsd-isdn@FreeBSD.ORG>
Sent: Monday, May 27, 2002 3:47 PM
Subject: Re: FreeBSD 4.6 RC2, Dynalink IS64PH ISA PnP card: "Can't assign
resources" ??
> Arvid Elstrodt wrote:
>
> > The two biggest chips on the card are both from Siemens, and they read:
> >
> > SIEMENS PSB 21525 N HSCX TE V2.1 GERMANY 748
> > SIEMENS PSP 2186N V1.1 ISAC-S TE GERMANY 9750L
> >
> > I have read through LINT and found that I *should* use following two
lines
> > in the kernel config:
> >
> > options DYNALINK
> > device iwic
>
> You need "device isic" for this chipset.
>
> > for FreeBSD: options ASUSCOM_IPAC device isic0
>
> This is not applicable for this chipset.
>
> In case you still do not get your card being recognized, please let me
> see the output of running pnpinfo on this machine.
>
> hellmuth
Hi,
I just finished compiling and rebooted ... no success :-(
Here is the config part:
# ISDN Suppport
device isic
options DYNALINK
pseudo-device "i4bq921"
pseudo-device "i4bq931"
pseudo-device "i4b"
pseudo-device "i4btrc" 4
pseudo-device "i4bctl"
pseudo-device "i4brbch" 4
pseudo-device "i4btel" 4
pseudo-device "i4bipr" 4
pseudo-device "i4bisppp" 4
options IPR_VJ
options IPR_LOG=5
And this is is the output of pnpinfo as you requested:
************** START **************************
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID ASU1688 (0x88167506), Serial Number 0x00000044
PnP Version 1.0, Vendor Version 0
Device Description: Dynalink ISDN Card ...
Logical Device ID: ASU1688 0x88167506 #0
Device supports I/O Range Check
I/O Range 0x100 .. 0x3f8, alignment 0x4, len 0x4
[not 16-bit addr]
IRQ: 3 4 5 9 10 11 12 15 IRQ: High true edge sensitive
IRQ: - only one type (true/edge)
End Tag
Successfully got 6 resources, 1 logical fdevs
-- card select # 0x0001
CSN ASU1688 (0x88167506), Serial Number 0x00000044
Logical device #0
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 0
IO range check 0x00 activate 0x00
***********************END*********************************************
I would really appreciate your continued help on this, as I am completely
lost !
Best Regards,
Arvid Elstrodt
Amersfoort, The Netherlands
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00f301c205b5$b1540c10$0102211f>