Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 15 Aug 2002 22:07:00 +0100
From:      Scott Mitchell <scott.mitchell@mail.com>
To:        pg@eth1.com
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: make errors on building CDRTOOLS-ATA
Message-ID:  <20020815220700.A5536@fishballoon.dyndns.org>
In-Reply-To: <20020814181750.40566.qmail@web9703.mail.yahoo.com>; from kjerstes@yahoo.com on Wed, Aug 14, 2002 at 11:17:50AM -0700
References:  <20020814181750.40566.qmail@web9703.mail.yahoo.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Aug 14, 2002 at 11:17:50AM -0700, c/o Peter Gatsoulis wrote:
> hi all
> 
> if anyone has a statically built binary on FBSD 4.6 of
> cdrecord for ata (ide cdburners) would you pls email
> it bak 2 me so i can get around the following problem?
> 
> the problem;
> have a FBSD 4.6 box 
> have ide cdburner
> burncd works ok for the first or second time then
> spits out errors, reboot machine and again burncd
> works great for 1-2 times then reboot again if a 3rd
> burn is needed , etc SO
> 
> went to Soren's freebsd.dk site and grabbed his
> cdrtools-ata file for ide cdburners
> he let me know that 4.6 is ok to use with cdrtools-ata
> 
> so i dnloaded cdrtools-ata then unpacked it then go to
> the unpacked top level dir and issue "make" or "make
> all" as it states in the README's etc

Try running './Gmake' from the top level cdrtools directory.  As
README.compile, says BSD make won't work with this package; you can get by
with gmake if you run it using the supplied Gmake script (see also
README.gmake).

You might have to install gmake from ports -- it's not part of the base
system.

HTH,

	Scott

-- 
===========================================================================
Scott Mitchell          | PGP Key ID | "Eagles may soar, but weasels
Cambridge, England      | 0x54B171B9 |  don't get sucked into jet engines"
scott.mitchell@mail.com | 0xAA775B8B |      -- Anon

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020815220700.A5536>