Date: Sat, 05 Sep 2009 20:21:11 +0200 From: Ralph Zitz <ralph@imada.sdu.dk> To: freebsd-usb@freebsd.org Subject: Re: USB quirks Message-ID: <4AA2AC17.8040802@imada.sdu.dk> In-Reply-To: <4AA2A5EF.7090100@imada.sdu.dk> References: <4AA2A5EF.7090100@imada.sdu.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
Ralph Zitz wrote: > Hello, > How does one know which quirks to add? At the moment I'm getting the > following messages when attaching my device: > > ugen4.2: <vendor 0x0781> at > usbus4 > > umass0: <vendor 0x0781 product 0x5406, class 0/0, rev 2.00/2.00, addr > 2> on usbus4 > umass0: SCSI over Bulk-Only; quirks = 0x0000 > umass0:3:0:-1: Attached to scbus3 > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:3a,0 > (probe0:umass-sim0:0:0:0): Medium not present > (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <SanDisk Cruzer 7.01> Removable Direct Access SCSI-0 device > da0: 40.000MB/s transfers > da0: 15286MB (31306239 512 byte sectors: 255H 63S/T 1948C) > xptioctl: pass driver is not in the kernel > xptioctl: put "device pass" in your kernel config file > (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 > (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:1): UNIT ATTENTION asc:29,0 > (probe0:umass-sim0:0:0:1): Power on, reset, or bus device reset occurred > (probe0:umass-sim0:0:0:1): Retrying Command (per Sense Data) > (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 > (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:1): NOT READY asc:3a,0 > (probe0:umass-sim0:0:0:1): Medium not present > (probe0:umass-sim0:0:0:1): Unretryable error > cd1 at umass-sim0 bus 0 target 0 lun 1 > cd1: <SanDisk Cruzer 7.01> Removable CD-ROM SCSI-0 device > cd1: 40.000MB/s transfers > cd1: cd present [49151 x 2048 byte records] > GEOM: da0: media size does not match label. > > The usbstick was formatted with fat32. In /dev I have da0 and da0a > listed, yet neither can be mounted: > > sudo mount_msdosfs /dev/da0a /home/ralph/mnt > mount_msdosfs: /dev/da0a: Invalid argument > > sudo mount_msdosfs /dev/da0 /home/ralph/mnt > mount_msdosfs: /dev/da0: Invalid argument > > I also don't understand the message about the pass device not being in > the kernel conf - it is. > > Any help would be greatly appreciated. > > Regards, > Ralph. > _______________________________________________ > freebsd-usb@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-usb > To unsubscribe, send any mail to "freebsd-usb-unsubscribe@freebsd.org" I forgot to mention: uname -a: FreeBSD 9.0-CURRENT FreeBSD 9.0-CURRENT #17 r196849: Sat Sep 5 09:35:27 CEST 2009 amd64
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4AA2AC17.8040802>