Date: Tue, 31 Jul 2007 17:27:01 -0400 From: "Cecil" <ceco108@gimail.af.mil> To: peterjeremy@optushome.com.au, ceco108@gimail.af.mil Cc: cwelug@googlegroups.com, freebsd-mobile@freebsd.org Subject: RE: Re: hot swapping USB drives and install packages or ports from theCD Message-ID: <4629e9c48f9b44ca98fcabe5747fd8c2.ceco108@gimail.af.mil>
next in thread | raw e-mail | index | archive | help
Hello Peter, Please bear with me, the mail system is at fault nothing I can do about format. >2. I would like to install Apache 2.2.4, PHP 5.2.3, and PHP-mysql >5.2.3 from my cdrom but I dont really understand the port system and >the dependicies, whether I should download the Distfiles to a CD You have two options for ports: a) Compile the ports yourself - which will automatically download distfiles. b) Download pre-compiled binary packages and just install them. A number of packages are available on the installation CDs or can be downloaded from various FTP servers. I found, download, and installed the packages a couple of times to get the config right for the packages to work together. Here are the results: >3. I have a USB stick drives that I would like to hotswap in and out >--- when I boot they are there as /dev/da1s1 but will not return when >I reinsert the drive in the usb port. This should work. If I understand you correctly, when you boot with the stick inserted, it is detected correctly but if you remove it and then re-insert it, it's not detected. Could you please post the relevant sections of /var/log/messages showing the initial da1 probe messages, when you remove it and when you re-insert it. Initial Jul 29 12:29:00 game kernel: usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 Jul 29 12:29:00 game kernel: usb3: USB revision 2.0 Jul 29 12:29:00 game kernel: uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 Jul 29 12:29:00 game kernel: uhub3: 6 ports with 6 removable, self powered Jul 29 12:29:00 game kernel: umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 Jul 29 12:29:00 game kernel: umass1: Memorex TD Classic 003B, rev 2.00/1.10, addr 3 Jul 29 12:29:00 game kernel: da1 at umass-sim1 bus 1 target 0 lun 0 Jul 29 12:29:00 game kernel: da1: <Memorex TD Classic 003B PMAP> Removable Direct Access SCSI-0 device Jul 29 12:29:00 game kernel: da1: 40.000MB/s transfers Jul 29 12:29:00 game kernel: da1: 981MB (2009088 512 byte sectors: 64H 32S/T 981C) Detached Jul 29 14:02:27 game kernel: umass1: at uhub3 port 4 (addr 3) disconnected Jul 29 14:02:27 game kernel: (da1:umass-sim1:1:0:0): lost device Jul 29 14:02:27 game kernel: umass1: detached Re-attached and open termand tried to rescan with the camcontrol rescan all command but was not detected. I noticed that the drive is being cognized as "removable, self powered" which wrong-did not power up when reinserted. What is needed to be done for the umass1 to use system power Thanks, Cecil
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4629e9c48f9b44ca98fcabe5747fd8c2.ceco108>