Date: Wed, 08 May 2013 23:02:19 -0700 From: Dennis Glatting <freebsd@pki2.com> To: freebsd-questions@freebsd.org Subject: pid 916 (tcsh): sigreturn set_fpcontext err 22 Message-ID: <1368079339.52625.7.camel@btw.pki2.com>
next in thread | raw e-mail | index | archive | help
I am seeing this error after a svn update (today) under 9.1 and under
CURRENT. Unfortunately I cannot login (even from the console) to scarf
off dmesg.boot but I found the path to correcting the problem is to boot
the old kernel.
Specifically, with the failed kernel I can boot to single user mode
without a problem but after the system goes multi-user all my commands
core dump with the subject error. In single user mode I simply restore
the old kernel (i.e., mv kernel.old) and all is well.
The following is the dmesg.boot from the failed kernel when booting to
single user mode.
Any clue?
root@rotfl:~ # cat dmesg.boot
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0 r250401: Wed May 8 22:21:12 PDT 2013
root@rotfl:/usr/obj/disk-1/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (trunk 178860) 20130405
WARNING: WITNESS option enabled, expect reduced performance.
CPU: AMD Opteron(TM) Processor 6272 (2100.04-MHz
K8-class CPU)
Origin = "AuthenticAMD" Id = 0x600f12 Family = 0x15 Model = 0x1
Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 31976153088 (30494 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <052412 APIC0723>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 16 core(s)
cpu0 (BSP): APIC ID: 32
cpu1 (AP): APIC ID: 33
cpu2 (AP): APIC ID: 34
cpu3 (AP): APIC ID: 35
cpu4 (AP): APIC ID: 36
cpu5 (AP): APIC ID: 37
cpu6 (AP): APIC ID: 38
cpu7 (AP): APIC ID: 39
cpu8 (AP): APIC ID: 40
cpu9 (AP): APIC ID: 41
cpu10 (AP): APIC ID: 42
cpu11 (AP): APIC ID: 43
cpu12 (AP): APIC ID: 44
cpu13 (AP): APIC ID: 45
cpu14 (AP): APIC ID: 46
cpu15 (AP): APIC ID: 47
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <SMCI > on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1403f00 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem
0xfed40000-0xfed44fff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci5: <ACPI PCI bus> on pcib1
mps0: <LSI SAS2008> port 0xe000-0xe0ff mem
0xdff3c000-0xdff3ffff,0xdff40000-0xdff7ffff irq 18 at device 0.0 on pci5
mps0: Firmware: 14.00.00.00, Driver: 14.00.00.02-fbsd
mps0: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib2
mps1: <LSI SAS2008> port 0xd000-0xd0ff mem
0xdfe3c000-0xdfe3ffff,0xdfe40000-0xdfe7ffff irq 16 at device 0.0 on pci4
mps1: Firmware: 14.00.00.00, Driver: 14.00.00.02-fbsd
mps1: IOCCapabilities:
185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mps2: <LSI SAS2008> port 0xc000-0xc0ff mem
0xdfd3c000-0xdfd3ffff,0xdfd40000-0xdfd7ffff irq 16 at device 0.0 on pci3
mps2: Firmware: 14.00.00.00, Driver: 14.00.00.02-fbsd
mps2: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.10> port
0xb800-0xb81f mem
0xdfce0000-0xdfcfffff,0xdfcc0000-0xdfcdffff,0xdfc9c000-0xdfc9ffff irq 17
at device 0.0 on pci2
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: 00:25:90:78:8b:7e
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.10> port
0xb400-0xb41f mem
0xdfc60000-0xdfc7ffff,0xdfc40000-0xdfc5ffff,0xdfc1c000-0xdfc1ffff irq 18
at device 0.1 on pci2
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: 00:25:90:78:8b:7f
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 12
igb1: Bound queue 5 to cpu 13
igb1: Bound queue 6 to cpu 14
igb1: Bound queue 7 to cpu 15
ahci0: <ATI IXP700 AHCI SATA controller> port
0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f
mem 0xdfbf8400-0xdfbf87ff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf7000-0xdfbf7fff
irq 16 at device 18.0 on pci0
usbus0 on ohci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf6000-0xdfbf6fff
irq 16 at device 18.1 on pci0
usbus1 on ohci1
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem
0xdfbf8800-0xdfbf88ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbfa000-0xdfbfafff
irq 18 at device 19.0 on pci0
usbus3 on ohci2
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbf9000-0xdfbf9fff
irq 18 at device 19.1 on pci0
usbus4 on ohci3
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem
0xdfbf8c00-0xdfbf8cff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem
0xdd000000-0xddffffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 20
at device 4.0 on pci1
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfbfb000-0xdfbfbfff
irq 18 at device 20.5 on pci0
usbus6 on ohci4
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xd3800-0xd47ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen4.1: <ATI> at usbus4
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <ATI> at usbus3
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
ugen6.2: <Winbond Electronics Corp> at usbus6
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,
rev 1.10/0.01, addr 2> on usbus6
kbd2 at ukbd0
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
(probe257:mps1:0:2:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe257:mps1:0:2:0): CAM status: Invalid Target ID
(probe257:mps1:0:2:0): Error 22, Unretryable error
(probe258:mps1:0:3:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe258:mps1:0:3:0): CAM status: Invalid Target ID
(probe258:mps1:0:3:0): Error 22, Unretryable error
(probe1:mps1:0:2:1): INQUIRY. CDB: 12 20 00 00 24 00
(probe1:mps1:0:2:1): CAM status: Invalid Target ID
(probe1:mps1:0:2:1): Error 22, Unretryable error
(probe2:mps1:0:3:1): INQUIRY. CDB: 12 20 00 00 24 00
(probe2:mps1:0:3:1): CAM status: Invalid Target ID
(probe2:mps1:0:3:1): Error 22, Unretryable error
(probe1:mps1:0:2:2): INQUIRY. CDB: 12 40 00 00 24 00
(probe1:mps1:0:2:2): CAM status: Invalid Target ID
(probe1:mps1:0:2:2): Error 22, Unretryable error
(probe2:mps1:0:3:2): INQUIRY. CDB: 12 40 00 00 24 00
(probe2:mps1:0:3:2): CAM status: Invalid Target ID
(probe2:mps1:0:3:2): Error 22, Unretryable error
(probe1:mps1:0:2:3): INQUIRY. CDB: 12 60 00 00 24 00
(probe1:mps1:0:2:3): CAM status: Invalid Target ID
(probe1:mps1:0:2:3): Error 22, Unretryable error
(probe2:mps1:0:3:3): INQUIRY. CDB: 12 60 00 00 24 00
(probe2:mps1:0:3:3): CAM status: Invalid Target ID
(probe2:mps1:0:3:3): Error 22, Unretryable error
(probe1:mps1:0:2:4): INQUIRY. CDB: 12 80 00 00 24 00
(probe1:mps1:0:2:4): CAM status: Invalid Target ID
(probe1:mps1:0:2:4): Error 22, Unretryable error
(probe2:mps1:0:3:4): INQUIRY. CDB: 12 80 00 00 24 00
(probe2:mps1:0:3:4): CAM status: Invalid Target ID
(probe2:mps1:0:3:4): Error 22, Unretryable error
(probe1:mps1:0:2:5): INQUIRY. CDB: 12 a0 00 00 24 00
(probe1:mps1:0:2:5): CAM status: Invalid Target ID
(probe1:mps1:0:2:5): Error 22, Unretryable error
(probe2:mps1:0:3:5): INQUIRY. CDB: 12 a0 00 00 24 00
(probe2:mps1:0:3:5): CAM status: Invalid Target ID
(probe2:mps1:0:3:5): Error 22, Unretryable error
(probe1:mps1:0:2:6): INQUIRY. CDB: 12 c0 00 00 24 00
(probe1:mps1:0:2:6): CAM status: Invalid Target ID
(probe1:mps1:0:2:6): Error 22, Unretryable error
(probe2:mps1:0:3:6): INQUIRY. CDB: 12 c0 00 00 24 00
(probe2:mps1:0:3:6): CAM status: Invalid Target ID
(probe2:mps1:0:3:6): Error 22, Unretryable error
(probe1:mps1:0:2:7): INQUIRY. CDB: 12 e0 00 00 24 00
(probe1:mps1:0:2:7): CAM status: Invalid Target ID
(probe1:mps1:0:2:7): Error 22, Unretryable error
(probe2:mps1:0:3:7): INQUIRY. CDB: 12 e0 00 00 24 00
(probe2:mps1:0:3:7): CAM status: Invalid Target ID
(probe2:mps1:0:3:7): Error 22, Unretryable error
(probe255:mps1:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10
00 00
(probe255:mps1:0:0:0): CAM status: SCSI Status Error
(probe255:mps1:0:0:0): SCSI status: Check Condition
(probe255:mps1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
command operation code)
(probe255:mps1:0:0:0): Command Specific Info: 0x1e00
(probe255:mps1:0:0:0): Error 22, Unretryable error
(probe1:mps1:0:3:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe1:mps1:0:3:0): CAM status: Invalid Target ID
(probe1:mps1:0:3:0): Error 22, Unretryable error
(probe2:mps1:0:2:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe2:mps1:0:2:0): CAM status: Invalid Target ID
(probe2:mps1:0:2:0): Error 22, Unretryable error
(probe1:mps1:0:3:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe1:mps1:0:3:0): CAM status: Invalid Target ID
(probe1:mps1:0:3:0): Error 22, Unretryable error
(probe2:mps1:0:2:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe2:mps1:0:2:0): CAM status: Invalid Target ID
(probe2:mps1:0:2:0): Error 22, Unretryable error
(probe3:mps1:0:3:1): INQUIRY. CDB: 12 20 00 00 24 00
(probe3:mps1:0:3:1): CAM status: Invalid Target ID
(probe3:mps1:0:3:1): Error 22, Unretryable error
(probe1:mps1:0:2:1): INQUIRY. CDB: 12 20 00 00 24 00
(probe1:mps1:0:2:1): CAM status: Invalid Target ID
(probe1:mps1:0:2:1): Error 22, Unretryable error
(probe3:mps1:0:3:1): INQUIRY. CDB: 12 20 00 00 24 00
(probe3:mps1:0:3:1): CAM status: Invalid Target ID
(probe3:mps1:0:3:1): Error 22, Unretryable error
(probe1:mps1:0:2:1): INQUIRY. CDB: 12 20 00 00 24 00
(probe1:mps1:0:2:1): CAM status: Invalid Target ID
(probe1:mps1:0:2:1): Error 22, Unretryable error
(probe4:mps1:0:3:2): INQUIRY. CDB: 12 40 00 00 24 00
(probe4:mps1:0:3:2): CAM status: Invalid Target ID
(probe4:mps1:0:3:2): Error 22, Unretryable error
(probe3:mps1:0:2:2): INQUIRY. CDB: 12 40 00 00 24 00
(probe3:mps1:0:2:2): CAM status: Invalid Target ID
(probe3:mps1:0:2:2): Error 22, Unretryable error
(probe1:mps1:0:3:2): INQUIRY. CDB: 12 40 00 00 24 00
(probe1:mps1:0:3:2): CAM status: Invalid Target ID
(probe1:mps1:0:3:2): Error 22, Unretryable error
(probe3:mps1:0:2:2): INQUIRY. CDB: 12 40 00 00 24 00
(probe3:mps1:0:2:2): CAM status: Invalid Target ID
(probe3:mps1:0:2:2): Error 22, Unretryable error
(probe4:mps1:0:3:3): INQUIRY. CDB: 12 60 00 00 24 00
(probe4:mps1:0:3:3): CAM status: Invalid Target ID
(probe4:mps1:0:3:3): Error 22, Unretryable error
(probe1:mps1:0:2:3): INQUIRY. CDB: 12 60 00 00 24 00
(probe1:mps1:0:2:3): CAM status: Invalid Target ID
(probe1:mps1:0:2:3): Error 22, Unretryable error
(probe3:mps1:0:3:3): INQUIRY. CDB: 12 60 00 00 24 00
(probe3:mps1:0:3:3): CAM status: Invalid Target ID
(probe3:mps1:0:3:3): Error 22, Unretryable error
(probe1:mps1:0:2:3): INQUIRY. CDB: 12 60 00 00 24 00
(probe1:mps1:0:2:3): CAM status: Invalid Target ID
(probe1:mps1:0:2:3): Error 22, Unretryable error
(probe4:mps1:0:3:4): INQUIRY. CDB: 12 80 00 00 24 00
(probe4:mps1:0:3:4): CAM status: Invalid Target ID
(probe4:mps1:0:3:4): Error 22, Unretryable error
(probe3:mps1:0:2:4): INQUIRY. CDB: 12 80 00 00 24 00
(probe3:mps1:0:2:4): CAM status: Invalid Target ID
(probe3:mps1:0:2:4): Error 22, Unretryable error
(probe1:mps1:0:3:4): INQUIRY. CDB: 12 80 00 00 24 00
(probe1:mps1:0:3:4): CAM status: Invalid Target ID
(probe1:mps1:0:3:4): Error 22, Unretryable error
(probe3:mps1:0:2:4): INQUIRY. CDB: 12 80 00 00 24 00
(probe3:mps1:0:2:4): CAM status: Invalid Target ID
(probe3:mps1:0:2:4): Error 22, Unretryable error
(probe4:mps1:0:3:5): INQUIRY. CDB: 12 a0 00 00 24 00
(probe4:mps1:0:3:5): CAM status: Invalid Target ID
(probe4:mps1:0:3:5): Error 22, Unretryable error
(probe1:mps1:0:2:5): INQUIRY. CDB: 12 a0 00 00 24 00
(probe1:mps1:0:2:5): CAM status: Invalid Target ID
(probe1:mps1:0:2:5): Error 22, Unretryable error
(probe3:mps1:0:3:5): INQUIRY. CDB: 12 a0 00 00 24 00
(probe3:mps1:0:3:5): CAM status: Invalid Target ID
(probe3:mps1:0:3:5): Error 22, Unretryable error
(probe1:mps1:0:2:5): INQUIRY. CDB: 12 a0 00 00 24 00
(probe1:mps1:0:2:5): CAM status: Invalid Target ID
(probe1:mps1:0:2:5): Error 22, Unretryable error
(probe4:mps1:0:3:6): INQUIRY. CDB: 12 c0 00 00 24 00
(probe4:mps1:0:3:6): CAM status: Invalid Target ID
(probe4:mps1:0:3:6): Error 22, Unretryable error
(probe3:mps1:0:2:6): INQUIRY. CDB: 12 c0 00 00 24 00
(probe3:mps1:0:2:6): CAM status: Invalid Target ID
(probe3:mps1:0:2:6): Error 22, Unretryable error
(probe1:mps1:0:3:6): INQUIRY. CDB: 12 c0 00 00 24 00
(probe1:mps1:0:3:6): CAM status: Invalid Target ID
(probe1:mps1:0:3:6): Error 22, Unretryable error
(probe3:mps1:0:2:6): INQUIRY. CDB: 12 c0 00 00 24 00
(probe3:mps1:0:2:6): CAM status: Invalid Target ID
(probe3:mps1:0:2:6): Error 22, Unretryable error
(probe4:mps1:0:3:7): INQUIRY. CDB: 12 e0 00 00 24 00
(probe4:mps1:0:3:7): CAM status: Invalid Target ID
(probe4:mps1:0:3:7): Error 22, Unretryable error
(probe1:mps1:0:2:7): INQUIRY. CDB: 12 e0 00 00 24 00
(probe1:mps1:0:2:7): CAM status: Invalid Target ID
(probe1:mps1:0:2:7): Error 22, Unretryable error
(probe3:mps1:0:3:7): INQUIRY. CDB: 12 e0 00 00 24 00
(probe3:mps1:0:3:7): CAM status: Invalid Target ID
(probe3:mps1:0:3:7): Error 22, Unretryable error
(probe1:mps1:0:2:7): INQUIRY. CDB: 12 e0 00 00 24 00
(probe1:mps1:0:2:7): CAM status: Invalid Target ID
(probe1:mps1:0:2:7): Error 22, Unretryable error
(probe255:mps1:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10
00 00
(probe255:mps1:0:0:0): CAM status: SCSI Status Error
(probe255:mps1:0:0:0): SCSI status: Check Condition
(probe255:mps1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
command operation code)
(probe255:mps1:0:0:0): Field Replaceable Unit: 48
(probe255:mps1:0:0:0): Command Specific Info: 0x30393030
(probe255:mps1:0:0:0): Error 22, Unretryable error
da4 at mps1 bus 0 scbus1 target 0 lun 0
da4: <LSI Logical Volume 3000> Fixed Direct Access SCSI-6 device
da4: 150.000MB/s transfers
da4: Command Queueing enabled
da4: 952720MB (1951170560 512 byte sectors: 255H 63S/T 121454C)
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da1 at mps0 bus 0 scbus0 target 7 lun 0
da1: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2 at mps0 bus 0 scbus0 target 8 lun 0
da2: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3 at mps0 bus 0 scbus0 target 9 lun 0
da3: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5 at mps1 bus 0 scbus1 target 4 lun 0
da5: <ATA ST2000DL003-9VT1 CC32> Fixed Direct Access SCSI-6 device
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da7 at mps2 bus 0 scbus2 target 2 lun 0
da7: <ATA ST3250410AS A> Fixed Direct Access SCSI-6 device
da7: 300.000MB/s transfers
da7: Command Queueing enabled
da7: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
da8 at mps2 bus 0 scbus2 target 3 lun 0
da8: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da8: 300.000MB/s transfers
da8: Command Queueing enabled
da8: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da6 at mps1 bus 0 scbus1 target 5 lun 0
da6: <ATA ST2000DL003-9VT1 CC32> Fixed Direct Access SCSI-6 device
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da9 at mps2 bus 0 scbus2 target 4 lun 0
da9: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da9: 300.000MB/s transfers
da9: Command Queueing enabled
da9: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da10 at mps2 bus 0 scbus2 target 5 lun 0
da10: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da10: 300.000MB/s transfers
da10: Command Queueing enabled
da10: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da11 at mps2 bus 0 scbus2 target 6 lun 0
da11: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da11: 300.000MB/s transfers
da11: Command Queueing enabled
da11: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da12 at mps2 bus 0 scbus2 target 7 lun 0
da12: <ATA ST32000542AS CC34> Fixed Direct Access SCSI-6 device
da12: 300.000MB/s transfers
da12: Command Queueing enabled
da12: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #10 Launched!
da13 at mps2 bus 0 scbus2 target 9 lun 0
da13: <ATA Hitachi HDS5C404 A250> Fixed Direct Access SCSI-6 device
SMP: AP CPU #11 Launched!
da13: 600.000MB/s transfers
da13: Command Queueing enabled
da13: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
SMP: AP CPU #7 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC" frequency 2100044099 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
da14 at mps2 bus 0 scbus2 target 10 lun 0
da14: <ATA Hitachi HDS5C404 A3B0> Fixed Direct Access SCSI-6 device
da14: 600.000MB/s transfers
da14: Command Queueing enabled
da14: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
Trying to mount root from ufs:/dev/gpt/disk0 [rw]...
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,
rev 1.10/0.01, addr 2> on usbus6
ums0: 3 buttons and [Z] coordinates ID=0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1368079339.52625.7.camel>