From owner-freebsd-mobile@FreeBSD.ORG Tue Jan 13 16:26:45 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 71B0C16A4CE for ; Tue, 13 Jan 2004 16:26:45 -0800 (PST) Received: from ddba033.netstream.ch (ddba033.netstream.ch [62.65.128.33]) by mx1.FreeBSD.org (Postfix) with ESMTP id B389843D48 for ; Tue, 13 Jan 2004 16:26:41 -0800 (PST) (envelope-from oliver@cosec.org) Received: from [62.65.148.234] (helo=relay.cosec.org ident=m1lkc0w) by ddba033.netstream.ch with esmtp (Exim 4.10) id 1AgYrj-0000gZ-00 for freebsd-mobile@freebsd.org; Wed, 14 Jan 2004 01:26:35 +0100 To: freebsd-mobile@freebsd.org X-PGP-FP: 179C E1EB EB64 48A3 F25A 372D 6A00 DCBC 5B51 58C6 X-PGP: 0x5B5158C6 Sender: oliver@cosec.org From: Oliver Enzmann Date: Wed, 14 Jan 2004 01:26:32 +0100 Message-ID: User-Agent: Gnus/5.1002 (Gnus v5.10.2) XEmacs/21.4 (Reasonable Discussion, berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: Vaio R600, 5.2-Current - cbb0: Unsupported card type detected X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 14 Jan 2004 00:26:45 -0000 Hi, After upgrading my Vaio R600 from 5.1-Current (last upgrade ~August '02) to 5.2-Current, I get "cbb0: Unsupported card type detected" for cards that ran fine under 5.1. I've tried "hw.pci.allow_unsupported_io_range=1" as well as "hw.cbb.start_memory=0x0800000" without success. I've included the verbose boot messages below. TIA, Oliver Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Wed Jan 14 00:26:38 CET 2004 oliver@nora.cosec.org:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a84000. Preloaded elf module "/boot/modules/acpi.ko" at 0xc0a842bc. Calibrating clock(s) ... i8254 clock: 1193177 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 844605868 Hz CPU: Intel Pentium III (844.61-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff real memory = 132644864 (126 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c29000 - 0x0000000007a95fff, 115789824 bytes (28269 pages) 0x0000000007d00000 - 0x0000000007e77fff, 1540096 bytes (376 pages) avail memory = 120070144 (114 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6cd0 bios32: Entry = 0xfd878 (c00fd878) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd860+0x150 pnpbios: Found PnP BIOS data at 0xc00f6d00 pnpbios: Entry = f0000:8aea Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: random: mem: Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fcc0 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fdf30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 30 A 0x60 9 embedded 0 30 B 0x61 9 embedded 0 30 C 0x62 9 embedded 0 30 D 0x63 9 slot 1 1 6 A 0x62 9 slot 1 1 6 B 0x63 9 slot 1 1 6 C 0x60 9 slot 1 1 6 D 0x61 9 slot 2 1 4 A 0x61 9 slot 2 1 4 B 0x60 9 slot 2 1 4 C 0x62 9 slot 2 1 4 D 0x63 9 embedded 1 9 A 0x62 9 embedded 1 9 B 0x63 9 embedded 1 8 A 0x68 9 embedded 0 0 A 0x60 9 embedded 0 0 B 0x61 9 embedded 0 0 C 0x62 9 embedded 0 0 D 0x63 9 embedded 0 31 A 0x60 9 embedded 0 31 B 0x61 9 embedded 0 31 C 0x6b 9 embedded 0 31 D 0x63 9 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 1 dev 2 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 unknown: not probed (disabled) pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0 \\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.1.1 \\_SB_.LNKC irq 0: [ 9] low,level,sharable 0.1.2 \\_SB_.LNKD irq 0: [ 9] low,level,sharable 0.1.3 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0 \\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.31.1 \\_SB_.LNKH irq 9: [ 9] low,level,sharable 0.31.2 \\_SB_.LNKD irq 0: [ 9] low,level,sharable 0.31.3 ---- before setting priority for links ------------ \\_SB_.LNKC: interrupts: 9 penalty: 830 references: 1 priority: 0 \\_SB_.LNKD: interrupts: 9 penalty: 830 references: 2 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKD: interrupts: 9 penalty: 830 references: 2 priority: 1660 \\_SB_.LNKC: interrupts: 9 penalty: 830 references: 1 priority: 830 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0 \\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.1.1 \\_SB_.LNKC irq 9: [ 9] low,level,sharable 0.1.2 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0 \\_SB_.LNKB irq 9: [ 9] low,level,sharable 0.31.1 \\_SB_.LNKH irq 9: [ 9] low,level,sharable 0.31.2 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 0.31.3 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x1130, revid=0x11 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f8000000, size 26, enabled map[14]: type 1, range 32, base f4000000, size 19, enabled pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA) pcib0: slot 2 INTA is routed to irq 9 found-> vendor=0x8086, dev=0x1132, revid=0x11 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x03 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x244c, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 4, enabled found-> vendor=0x8086, dev=0x244a, revid=0x03 bus=0, slot=31, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.31.INTD (source \\_SB_.LNKD) pcib0: slot 31 INTD is routed to irq 9 found-> vendor=0x8086, dev=0x2442, revid=0x03 bus=0, slot=31, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 map[20]: type 4, range 32, base 00001810, size 4, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x2443, revid=0x03 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.31.INTC (source \\_SB_.LNKH) pcib0: slot 31 INTC is routed to irq 9 found-> vendor=0x8086, dev=0x2444, revid=0x03 bus=0, slot=31, func=4 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 00001880, size 6, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x2445, revid=0x03 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x2446, revid=0x03 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 agp0: mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 9 at device 2.0 on pci0 pcib1: at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xf4100000-0xf41fffff pcib1: prefetched decode 0xfff00000-0xfffff pcib1: Subtractively decoded bridge. ---- initial configuration ------------------------ \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0 \\_SB_.LNKC irq 9: [ 9] low,level,sharable 1.2.0 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 1.2.1 \\_SB_.LNKE irq 9: [ 9] low,level,sharable 1.8.0 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.12.0 \\_SB_.LNKB irq 9: [ 9] low,level,sharable 1.12.1 \\_SB_.LNKC irq 9: [ 9] low,level,sharable 1.12.2 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 1.12.3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.0.0 \\_SB_.LNKC irq 9: [ 9] low,level,sharable 1.2.0 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 1.2.1 \\_SB_.LNKE irq 9: [ 9] low,level,sharable 1.8.0 \\_SB_.LNKA irq 9: [ 9] low,level,sharable 1.12.0 \\_SB_.LNKB irq 9: [ 9] low,level,sharable 1.12.1 \\_SB_.LNKC irq 9: [ 9] low,level,sharable 1.12.2 \\_SB_.LNKD irq 9: [ 9] low,level,sharable 1.12.3 pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base f4105000, size 11, enabled map[14]: type 1, range 32, base f4100000, size 14, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA) pcib1: slot 0 INTA is routed to irq 9 found-> vendor=0x104c, dev=0x8021, revid=0x02 bus=1, slot=0, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0112, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=9 powerspec 2 supports D0 D2 D3 current D0 found-> vendor=0x1180, dev=0x0475, revid=0x80 bus=1, slot=2, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f4104000, size 12, enabled map[14]: type 4, range 32, base 00003000, size 6, enabled pcib1: matched entry for 1.8.INTA (source \\_SB_.LNKE) pcib1: slot 8 INTA is routed to irq 9 found-> vendor=0x8086, dev=0x2449, revid=0x03 bus=1, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 fwohci0: mem 0xf4100000-0xf4103fff,0xf4105000-0xf41057ff irq 9 at device 0.0 on pci1 fwohci0: latency timer 64 -> 64. fwohci0: cache size 8 -> 8. pcib1: device fwohci0 requested decoded memory range 0xf4105000-0xf41057ff fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 08:00:46:03:00:c3:9a:d3 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x3 loop=0, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 0a:00:46:c3:9a:d3 fwe0: bpf attached sbp0: on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 cbb0: at device 2.0 on pci1 pcib1: device cbb0 requested decoded memory range 0xf4100000-0xf41fffff cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: matched entry for 1.2.INTA (source \\_SB_.LNKC) pcib1: slot 2 INTA is routed to irq 9 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x04751180 0x02100007 0x06070080 0x00022000 0x10: 0xf4100000 0x020000dc 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000109 0x40: 0x80e0104d 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04a20001 0x00000000 0x04630463 0x30000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x80e0104d 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe190001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fxp0: port 0x3000-0x303f mem 0xf4104000-0xf4104fff irq 9 at device 8.0 on pci1 pcib1: device fxp0 requested decoded memory range 0xf4104000-0xf4104fff fxp0: using memory space register mapping fxp0: Ethernet address 08:00:46:17:51:ab fxp0: PCI IDs: 8086 2449 0000 0000 0003 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1800-0x180f at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata1-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01 ata1: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: port 0x1820-0x183f irq 9 at device 31.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 31.3 (no driver attached) uhci1: port 0x1840-0x185f irq 9 at device 31.4 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.80, addr 2 umass0:1:0:-1: Attached to scbus1 pci0: at device 31.5 (no driver attached) pci0: at device 31.6 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_ec0: port 0x66,0x62 on acpi0 sio0: irq maps: 0x601 0x611 0x601 0x601 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) acpi_cmbat0: on acpi0 acpi_acad0: on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: