Date: Fri, 17 Jul 1998 00:36:11 +0200 (CEST) From: Leif Neland <root@internet.dk> To: questions@FreeBSD.ORG Subject: X can't set default font path Message-ID: <Pine.BSF.3.96.980717002948.940A-100000@darla.swimsuit.internet.dk>
next in thread | raw e-mail | index | archive | help
Suddenly, startx fails with the above error message. It worked last night at shutdown, now it doesn't. I get this, when I run startx: XFree86 Version 3.2 / X Window System (protocol Version 11, revision 0, vendor release 6100) Release Date: Oct 26 1996 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 2.2.0 Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, et4000, et4000w32, et4000w32i, et4000w32p, et4000w32p, et6000, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, tgui9660xgi, tgui9680, cyber938x, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5462, clgd5464, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, ncr77c22, ncr77c22e, mga2064w, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65530, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, generic Using syscons driver with X support (version 2.0) (using VT number 10) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keycodes: "xfree86" (**) XKB: types: "default" (**) XKB: compat: "default" (**) XKB: symbols: "en_US(pc101)+dk" (**) XKB: geometry: "pc" (**) Mouse: type: MouseMan, device: /dev/cuaa1, baudrate: 1200, Chorded middle button (**) SVGA: Graphics device ID: "My Video Card" (**) SVGA: Monitor ID: "My Monitor" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/75dpi/:unscaled, /usr/X11R6/lib/X11/fonts/100dpi/:unscaled, /usr/X11R6/lib/X11/fonts/75dpi/, /usr/X11R6/lib/X11/fonts/100dpi/" (--) SVGA: chipset: clgd5428 (**) SVGA: videoram: 1024k (--) SVGA: clocks: 25.23 28.32 41.16 36.08 31.50 39.99 45.08 49.87 (--) SVGA: clocks: 64.98 72.16 75.00 80.01 85.23 (--) SVGA: Maximum allowed dot-clock: 85.500 MHz (**) SVGA: Mode "1024x768": mode clock = 75.000, clock used = 74.999 (**) SVGA: Mode "640x480": mode clock = 31.500, clock used = 31.499 (**) SVGA: Mode "800x600": mode clock = 40.000, clock used = 39.991 (**) SVGA: Virtual resolution set to 1024x768 (--) SVGA: Generic SpeedUps selected (Flags=0x30) (--) SVGA: clgd5428: Internal memory clock register is 0x1c (Extended RAS) (**) SVGA: clgd5428: Approximate DRAM bandwidth for drawing: 25 of 100 MB/s (--) SVGA: clgd5428: 262144 bytes off-screen memory available (--) SVGA: clgd5428: Using hardware cursor (--) SVGA: clgd5428: Using accelerator functions (--) SVGA: clgd5428: Using BitBLT engine PEX extension module not loaded XIE extension module not loaded failed to set default font path '/usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/75dpi/:unscaled, /usr/X11R6/lib/X11/fonts/100dpi/:unscaled, /usr/X11R6/lib/X11/fonts/75dpi/, /usr/X11R6/lib/X11/fonts/100dpi/' Fatal server error: could not open default font 'fixed' X connection to :0.0 broken (explicit kill or server shutdown). (Reformatted.) Please answer directly (too); I can't keep up with the list. leifn@internet.dk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980717002948.940A-100000>